Really,. A Sander for burnt bread😂😂😂😂😂🤣🤣🤣🤣I thought this was hacks not comedy and aren't alot of these common sense 😬 and a hot glued spork, mmmm I love the taste of hot glue with my noodles🤣
Another possible way, is to use posterboard or cardboard or posterboard. Make a fold in the middle to bend; and then just dump the hair in a trash bin. Fold up, put away in cabinet.
How about the hack of teaching people not to waste water? I saw the water faucet running unnecessarily while you were washing the glass. Disliked the video and stopped watching.
0:01 yeah no 0:53 you need a new broom for this, just get a brush (you can attach it to a broomstick you already own, that's it) 1:49 sand outside has particle/dirt you don't know about that may damage the skin. Im also doubtful about the soap. 5:56 hot glue is not food safe and might melt again with soup heat 7:54 proper tools and techniques will help you save water (an issue in 9:42 )
Absolut korrekt! Sand im Abfluss kann die Rohre verstopfen und auf einen teuren Klempner zu warten, macht den Hack teuer und zeitaufwändig. Dann lieber das gebrauchte Kaffeepulver zum Peelen benutzen. Das kostet nichts, enthält leichte Säuren, straffendes Koffein, durch das Aufkochen ist es steril und nicht mehr scharfkantig und es ist leicht genug, um vollständig aus den Rohren gespült zu werden. Und die Kläranlagen haben damit auch kein Problem, denn Kaffeesatz ist von der Anlage gut zu filtern und hinterlässt keine Gifte und keine Nanopartikel oder Kunststoff. Bei Sand ist das heutzutage anders. Der besteht inzwischen zu einem enormen Teil aus zerriebenem Plastik, sowie jeder Menge Gifte und Keime. Damit niemals auf die Haut!
4:42 cutting through 1st AND 2ND layer. Only should be cutting the first and Not accidentally the 2nd. What a fk up!!! They of course didnt show this, but it's obvious u don't do What They did. 😂😂
I thought he was going to say that you shouldn't leave the water running while you brush the glass, but NO!! wastes water like it's left over these days
0:18: Wasser ins Spülbecken, Wasserhahn abdrehen, einen Spritzer Spülmittel ins Wasser , alles einmal bürsten oder mit einem Tuch abreiben, Wasser ablassen, evtl bei viel Geschirr nochmal ein wenig Wasser einlaufen lassen, Seifenwasser abspülen und dann umgekehrt auf die Spüle stellen und ablaufen lassen. Das Spülmittel hebt die Oberflächenspannung auf und so läuft alles B. Gegebenenfalls abtrocknen. Aber die ganze Zeit das Wasser laufen lassen? Wir haben das Jahr 2022. Noch nichts von Wasserknappheit und Unweltproblemen gehört?! 😳
Thank you, to the original poster, I have been struggling/fighting with flat sheets on my king-sized bed for almost 2 decades. This short tutorial might have finally turned the tides.
Wasted a perfectly good fork that they could have used instead of breaking the fork and gluing the fork to the spoon I would have ditched the spoon used the fork makes sense right wrong the hacks they show require extra doiñg I wouldn't waste my time when the way your suppost too is much easier none of this gluing sewing or whatever. Some of them are just plain ridiculous it's embarrassing lol
@@Palmetto-J Omg they used a hot glue gun, it’s not toxic if you’re eating soup & you want more noodles and the juice you would need a spoon. Idk why people have to make things so literal. It’s obviously just for fun & to make you think & be more creative.
At 4:42 😂😂😂😳 using a razorblade knife to cut the x shape in the ' vinyl ' by bending it upwards towards the same material and slicing through not ONLY THE 1 ST LAYER but the 2ND BACK PIECE TOO. Now you just had to do THE WHOLE WALL ALL OVER AGAIN.😎 and hopefully got extra of it.
Best of all: Baking soda + vinegar to unclog toilet. I keep both in my bathroom cabinet, because my low-flush toilets tend to clog now and then. No messy plunging!
Usually these hacks are either more trouble than they’re worth or they don’t work whatsoever at all. But almost ALL the hacks here are actually very useful.
Wow! I've never seen so many cool hacks in a row.. I love the marble lazy Susan I said. But no matter how many times I shake the jar I can't get the gummies to disappear.
Letting the water faucet run, while doing other things is a waste of water. Cellophane wrap over sink-- maybe newspaper is a better choice, there is too much plastic ending up in our water-ways. Otherwise, there are many intersting ideas--...
5.45 What a silly hack! Isn't it more easier to use a complete fork? Why do you have to break the fork and stick it on the tip of the spoon with the dangerous non food grade materials like glue?
0:53: Wenn man einen Pinsel benutzt, ist der Farbauftrag gleichmäßiger, man erreicht die Fugen und kleinen Risse, man muss keinen Besen opfern und den Pinsel kann man danach ausspülen und wiederverwenden. Und bei lösemittelhaltigen Lacken stellt man, wenn man über mehrere Tage arbeitet oder eine Pause machen möchte, den Pinsel ins Wasser und schüttelt es am nächsten Tag einfach aus den Borsten. Mach sowas mal mit einem Besen. Ein Pinsel kostet im teuren Deutschland je nach Größe und Qualität 1,50 bis 4€. Ein Besen kostet ungefähr das 3- bis vierfache. Und das erzeugt am Ende der Arbeit auch viel mehr Müll. Ein Pinsel besteht aus Naturhaar oder einer kleinen Menge Kunststoffborsten, und ansonsten aus Weißblech und Holz. Ein Besen aus sicherlich mindestens der 10fachen Menge Holz, ummantelt mit Plastik, sowie einem großen Kopf aus Plastik. Ökologisch, um eine rissige, kaputte und nicht mal geschliffene Parkbank zu streichen, ein Horror, zumal auf dem ungepflegten Untergrund die Farbe nach dem nächsten Winter und etwas UV-Licht sowieso wieder ab geht. Ein sehr schlechter Rat. Ich mache sowas beruflich. Ich bin eine ganz normale, nicht übermäßig kräftige Frau von Anfang 50. Wenn ich eine große Fläche zu lackieren habe, die solche Bretter hat, lege ich Filz aus (kann man mehrmals verwenden und wird aus textilem Abfall gefertigt... ein gutes Recycling!) und spritze es mit einem Niederdruck-Sprühgerät, das man im Baumarkt für 40€ bekommen kann. Und weil sowas nicht viel kostet, haben viele Leute sowas in der Garage stehen und man kann sich bestimmt eines ausleihen. Stecker in die Steckdose, Farbe mit Wasser oder Verdünner oder Owatrol mischen (je nach Lack), ab damit in die Flasche des Gerätes, aufschrauben, Schalter auf "I" und sprühen. Danach reinigen und fertig ist die Arbeit. Sauber, schnell und ohne Kraftaufwand und Müll.
Bless your hearts for continuing to bring content, even though commenters on YT seem to get more and more contentious every day. Thankfully there's still enough who watch with appreciation for the work and intention, without needing to single out the tips which won't work for this, that or the other reason...
I think your presentation is very bright and lovely,...it does away with depression..is energetic creative out of box and provides a brighter outlook to life...great work 👍
1:37: endlich ein guter Tipp. Wenn ein Trockner nicht mehr richtig trocknet, ist es hilfreich, nach einer Anleitung zu suchen, zB auf YT, wie man bei dem eigenen Modell das Heizelement ausbaut. Meist ist es hinter der Rückwand der Trommel oder unter der Trommel verbaut. Dann das Heizelement ausbauen (geht ganz einfach!) gründlich sauber machen (von Miele kann man sie auch nach dem Absaugen mit der Dusche sauber machen und nach dem Trocknen wie neu wieder einbauen), und dann heizen sie wieder, denn es ist kein Fell aus Fusseln mehr drauf, das die Wärme zurück hält. So muss man vielleicht keinen neuen Trockner kaufen. Ich habe mir einen sehr guten Trockner gekauft. Das war vor genau 20 Jahren. Und mit einem sauberen Heizelement funktioniert er bis heute wie neu.