Тёмный

392 HEMI Gains 50+ HP with Camshaft Package: DYNO TESTED! 

Подписаться
Просмотров 15 тыс.
% 362

Today we installed our Stage-3 NA Camshaft Package on this beautiful 2021 Dodge Charger 392 Scatpack and tested out its performance on the dyno! Enjoy the sights and sounds of the shop as our expert technicians upgrade this Charger to the next level.
Modifications Performed Below:
- National Speed NS1 Camshaft
- Stainless Works Long-Tube Headers
- Lead Pipes + High-Flow Catalytic Converters
- Corsa V8 Air-Intake
- NGK LZTR6AIX-13 Spark Plugs
- Brian Tooley Racing Chromoly Pushrods
- Brian Tooley Racing Valve Spring Set
- J&L Oil Separator
- OEM Mopar Engine Oil Pump
Looking for more performance out of your Ride Learn about our Performance Packages here: nationalspeedinc.com/packages/
We want to hear from you!
Contact Us: nationalspeedinc.com/contact
Phone: 833-628-7733
Connect with National Speed online:
Subscribe to our RU-vid channel: ru-vid.com
Visit our Website: nationalspeedinc.com
Like us on Facebook: NationalSpeed
Follow us on Instagram: nationalspeed
Visit us at one of our shops: nationalspeedinc.com/locations

Авто/Мото

Опубликовано:

 

18 дек 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@samrmills
@samrmills 9 месяцев назад
Nicely done! Wish there was a shop like yours closer to me
@ThePaul1551
@ThePaul1551 13 дней назад
So all in all about 30 minutes to complete LOL
@SuperTruck1
@SuperTruck1 2 месяца назад
Dayum!!! 50whp and 80ft lbs....id say it was damn well worth it
@thezod2307
@thezod2307 Месяц назад
I just had this done on my manual scatpack, 480 at the wheels with a stage 3 hrt comp cam and stainless power longtubes. Be aware that different dynos will give you different numbers. So mileage will vary, but i def feel the difference, car sounds nasty and has a great idle.
@christianhernandez7071
@christianhernandez7071 18 дней назад
Cost of this all ?
@tl3565
@tl3565 9 месяцев назад
I’d like to see 0-60s and performance numbers. I need to know if the bump in power worth the cost.
@jtc1964x
@jtc1964x 5 месяцев назад
you need both real world acceleration numbers and also the power feel down low and midrange. If the 50HP comes at the expense of power under 4,000 RPM, where you spend most of your time driving, it may not be worth it. There are not a lot of easy NA gains to be had with this motor
@Vxc6
@Vxc6 21 час назад
2:22 meow 😸
@kingshark3503
@kingshark3503 8 месяцев назад
Don't get turned off by, your own labor cost. Hey, sometimes you just gotta let the pros, handle it.
@Cuda_Jr
@Cuda_Jr 4 месяца назад
is this setup emissions legal in VA? looking to do mine. you guys are only about 2 hours away.
@afrosamurai4465
@afrosamurai4465 25 дней назад
Would MSD or RIPP ignition coils increase the HP on this package?
@Sky1
@Sky1 3 месяца назад
I'll probably do that when my Cam and lifters go but until then its not worth the cost
@rob3332
@rob3332 Месяц назад
If cam and lifters go chances are there's metal shavings throughout the motor.. not great for main or rods bearings etc.
@traiw3108
@traiw3108 7 месяцев назад
Was the converter changed if so then what size?
@srtmaxo
@srtmaxo 9 месяцев назад
Wish I could do the stage 3 package for my 08 srt8 charger, but y’all are far as heck 😔
@kndli67
@kndli67 9 месяцев назад
Ship it ship it ship it let that 6.1 breathe
@GlocknLoadedd
@GlocknLoadedd 8 месяцев назад
What camshaft pacakage ?
@leodouglas7343
@leodouglas7343 2 месяца назад
How much did all that cost?
@392_RHINO
@392_RHINO День назад
Probably around 5k for labor. The cam and kit is the cheap part.
@lanegeisewite1436
@lanegeisewite1436 9 месяцев назад
What lifters do u use to get rid of the junk oem dod ones? And the junk vvt sprocket?
@mopar1524
@mopar1524 4 месяца назад
To bad your junk brain is to broken to realize it's not a lifter problem.
@honeysugar5411
@honeysugar5411 9 месяцев назад
what kind of camshaft?
@MKM_RIVAL_
@MKM_RIVAL_ 9 месяцев назад
Where did you get that rear diffuser from?
@392_RHINO
@392_RHINO 2 месяца назад
Ebay has them for $100 bucks
@DRETV_707
@DRETV_707 9 месяцев назад
It’s sounds good but this seems expensive compared to how much horsepower you gain. Doesn’t seem to be worth it
@PatrickReagan
@PatrickReagan 7 месяцев назад
That 10% bump in HP is going to respond well in an N/A car such as the 392.
@Nelbone
@Nelbone 5 месяцев назад
Makes them quite formidable against alot of their competitors. E85 plus, a little weight reduction, and a good tire paired with this is not to be slept on. There’s not much else that can be squeezed out of a 6.4 without camming or boosting.
@BigJoe2.0
@BigJoe2.0 5 месяцев назад
Welcome to the world of hemi's. Expensive to mod for not a lot of gain. They come pretty optimized from the factory.
@Jiggy426
@Jiggy426 2 месяца назад
I will say that cam, TS long tubes and e85 was the best money spent on my build
@BigJoe2.0
@BigJoe2.0 2 месяца назад
@@Jiggy426 I've heard e85 doesn't do much for our cars (392). I guess with cams it does?
@gmula5
@gmula5 6 месяцев назад
What did u do with all the fluid in the cylinder
@Levaiathann
@Levaiathann 3 месяца назад
It’s coolant…. It’ll be replaced easily
@dbrock1921
@dbrock1921 6 месяцев назад
The main question is do you want to void your warranty for 50hp 🤔
@BigJoe2.0
@BigJoe2.0 5 месяцев назад
Most people do including me. Stock is boring
@ericerickson592
@ericerickson592 3 месяца назад
Half the time the warranty is a joke. You are better off fixing it yourself.