3D Printed Revolver - Single Action Prop Gun

Подписаться 1,4 тыс.

Просмотров 86 тыс.

50% 1

Huge Update:
There is a new version which is double-action and there is no need to buy screws or any other parts, as the model is 100% printable WITHOUT supports and does not need any glue.
Files:
www.printables.com/model/552686
Creator:
/ @desteiner1786
Video:
• DeSteiner Revolver-II ...
Download link (filess are created by Steiner 3D @DeSteiner)
www.printables.com/pl/model/2...
Download, print, like the model and enjoy.
BoM:
There is a pdf under the thing files (revolver_exploded_2019-01-28.pdf):
cdn.thingiverse.com/assets/5a...
Just in case I reuploaded the pdf to my blog and added the list:
medyk3d.com/2020/09/3d-printe...
Google drive link:
drive.google.com/file/d/1jgDO...
1x M5x50 03 ISO 4762
1x Spring 4x18 ( 0,4) 27 from pen ****)
1x ST4,2x18 (non standard length) 26 (ISO 7049) *) **)
4x ST4,2x13 (ST4,2x11 to ST4,2x13) 25 ISO 7049 *)
4x ST4,2x10 (ST4,2x9 to ST4,2x14) 24 ISO 7049 *)
1x ST4,2x7 (non standard lenght) 23 (ISO 7049) *) ***)
1x ST4,2x4,5 (standard length) 22 ISO 7049 *) ***)
1x ST2,9x7,5 (non standard length) 21 (ISO 7049) *) ***)
1x M5x30 20 ISO 4762
*) "Sheet Metal" screw (ST)
Standardized available
lengths: 4,5/6,5/9,5/13/16/
19/22/25/32/39mm
**) flat tip recommended
***) flat tip required
For flat tips, get longer
screws and cut them to
the needed length.
****)outer diameter: max 4mm
wire diameter: ~0,4mm
length: min 18mm
compressed: max 6mm
0:00 Intro
1:14 Timelapses
2:28 Assembly
9:12 Bullets
11:03 Outro
Do you have any ideas what I can make next? Any questions, thoughts?
Leave a comment now!
You can support me by:
- posting a comment,
- smashing the like button,
- subscribing to my channel,
- buying me a coffee (filament in fact).
That really helps me, thanks!
For more info about me you can visit my social media I am on:
Thingiverse, MyMiniFactory, Odysee, Lbry, Twitter, Instagram, TikTok.
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
music by:
Jamessi
Light Tune ~ No.1
licensed under CC0
freesound.org/people/Jamessi/sounds/410520/
#medyk3D #3DPrinting #3DPrintedRevolver

Наука

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 220

@medyk3D 19 дней назад

Huge Update: There is a new version which is double-action and there is no need to buy screws or any other parts, as the model is 100% printable WITHOUT supports and does not need any glue. You can get the files for free here: www.printables.com/model/552686 Video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P2TgjPxdLdA.html Creator: www.youtube.com/@desteiner1786

@desteiner1786 3 года назад

Creator here. Thanks a lot for your kind words, I am glad you like it! Very smooth printjob right there and well made video, keep up the good work! By the way, I keep mine next to my PC and also grab and flip it whenever I wait for the PC to do something ;P

@medyk3D 3 года назад

Thanks for the kind words and publishing this awesome design. It's really top notch. Once you started to flip it you never stop :)

@BinkvH 3 года назад

Which files do i need to print, like all of them or are some unnessecary. There are alot of files and i cant figure it out.

@medyk3D 3 года назад

@@BinkvH It depends, because you can choose/customize: 1) Grip: revolver_grip_classic.stl and revolver_body_classic.stl OR revolver_body.stl and revolver_grip_left.stl and revolver_grip_right.stl 2) Revolver barrel: - just choose only one file starting with 'revolver_barrel' (the one which you like best) 3) Korn - revolver_korn.stl OR revolver_korn_bicolor_fixing.stl and revolver_korn_bicolor_tip.stl 4) Hammer - hammer.stl or hammer_brimmed.stl (the same part but the second one has included brim - useful while printing with ABS) 5) sl_button.stl and sl_body.stl - optional quick loader 6) Files starting with 'disp-' are the dispaly base parts Also read the 'What you need section' from thingiverse Summary for the required hardware and which parts to print with ABS (I used PETG). The assembly drawing is helpful: i.imgur.com/3nPtyNg.jpg

@BinkvH 3 года назад

@@medyk3D is it possible to print in PLA, my printer is in my room and i dont have the time to install a good ventilation system.

@medyk3D 3 года назад

Yes it is possible, but the lifetime might be limited. I printed mine with PETG, which not as bad as ABS. Also there are just a few small parts which are not supposed to be printed with PLA. So you can start printing, leave the room and air it out after printing.

@rolandgramlich8390 2 года назад

This is the best channel I've ever watched in my entire life keep up the good work!

@medyk3D 2 года назад

Thank you!

@2pack4norbi 3 года назад

Steiner 3d made amazing model. I have to make myself prop gun like this to hang it on the wall as decoration, because it definitely would look amazing. Very good video my man!

@medyk3D 3 года назад

Thanks! There a lot of great engineering work in it. Pleasure to make it.

@skidYYYY Месяц назад

Your videos are genuinely the funniest and best-edited videos I have seen on the internet this video is a hidden gem

@medyk3D Месяц назад

Thank you. You’re the best

@huntliba 3 года назад

Nicely done m8! Awesome!

@medyk3D 3 года назад

Thank you Heino!

@kalecardenas9645 3 года назад

Thanks for the files

@medyk3D 3 года назад

All the credits go to @DeSteiner who is the creator.

@marlondeanbellot.7945 2 года назад

These get me so excited !!! !!! !!! !!!

@Cerosss84 3 года назад

Nice 👏👏👏👏 perfect print

@medyk3D 3 года назад

Thanks a lot!

@locklear308 2 года назад

I wonder if the cartridges could be modified with some kind of a spring setup with a nerf ball. Basically you out the nerf balls in, push down the spring, then the hammer hits something that releases the spring and the nerf ball flys out

@medyk3D 2 года назад

Not enough space to put a spring big enough to push the nerf. Maybe a pneumatic system could be used? No idea.

@thegooseshow8358 Год назад

I printed this gun on an anycubic mega s and it worked out pretty good, except the hammer sometimes doesn't click unless u tap it with ur finger, and the cylinder doesn't rotate while inside the body when u pull the hammer, other than that, very good design, no other complaints

@paleopteryx Год назад

It looks amazing...

@medyk3D Год назад

Thanks!

@chopcyk6452 3 года назад

Looks very nice!

@medyk3D 3 года назад

Thanks!

@medyk3D 3 года назад

I spent much too much time flipping it around my finger.

@SamanKale-od5wn Год назад

Medy y don't you do one that actually fires..likein one of Ur comments saying it's really tempting and getting tempting or hav u already done one that actually fires..or is that old news.. STEVIE.

@medyk3D Год назад

@@SamanKale-od5wn Old news. In my country it's not allowed to but even the smallest caliber cartridges. Creating a rubber band or Nerf pistol is not fun for me.

@phried_eggs 4 месяца назад

Um, where is the shell covering for the rounds?I didn't find it in the files

@medyk3D 4 месяца назад

@@phried_eggs Not sure what you mean? revolver_cylinder.stl or speedloader_body.stl maybe?

@phried_eggs 4 месяца назад

@@medyk3D ah, I'm just dumb mb bro

@kalenbai1921 Год назад

Thank you.

@luisdelacruz7660 3 года назад

I would love this but as a cap gun, need to build one!

@medyk3D 3 года назад

No idea if it will work as a cap gun. Buy you can give it a go and share the results.

@stratman._. 2 года назад

Absolutely love this video and the model. I just wish I could find the files for myself sadly

@medyk3D 2 года назад

I contacted the creator of the files. Still no response.

@lukegn Год назад

they're on thingiverse! DeSteiner Prop Gun!

@ChaseHukill 2 года назад

I just 3D printed this model! I love it but I'm having trouble with the cycling, the hammer keeps getting stuck after a few shots

@medyk3D 2 года назад

I have no issues with mine, it still works.

@mirazmunabbir 2 года назад

@@medyk3D site no longer has the 3d file

@medyk3D 2 года назад

New link (no screws, glue, fully 3D printable): www.printables.com/model/552686 Old download link (requires bolts and other stuff): www.printables.com/pl/model/276918-prop-gun-revolver-single-action

@xrainbow-kq2ir Год назад

the wat back download does not work it just says no file

@medyk3D Год назад

@@xrainbow-kq2ir try here: file.io/fpHxpmz51xwb

@DireAvenger001 Год назад

@@medyk3D it says file deleted?

@medyk3D Год назад

@@DireAvenger001 true. I will upload it somewhere else and post a new link.

@DireAvenger001 Год назад

@@medyk3D Not all heroes wear capes. God bless you

@balconio1172 4 месяца назад

wow those layers are absolute perfection. i guess you get what you pay for with Prusa machines and filament (says someone who uses an Ender 3 and cheap Elegoo filament)

@medyk3D 3 месяца назад

Thanks. You can get great results with Ender 3 too. Tune your printer, print settings and use better filament. But yeah, there is always a limit. Prusa just lets you to print in good quality hussle free.

@yarosyari3516 2 месяца назад

As I understand for making it works as expected we need to screw 1 sharp bolt in the hammer only?

@medyk3D Месяц назад

As I mentioned in 7:09 I did not have any M5 metric thread cutter so I used the sharpened bolt to make the threads. All the others are selfthreading.

@shrapnelbladez2372 3 года назад

I'm going to try to modify this to shoot 22lr.

@medyk3D 3 года назад

Great! Let me know how it went.

@shrapnelbladez2372 3 года назад

@@lalalalalalalalala60 My printer just came 2 days ago. It will take a bit .

@DireAvenger001 Год назад

@@shrapnelbladez2372 how did it go?

@Dem0VR Год назад

@@shrapnelbladez2372 how did it go

@Armadill0h Год назад

@@Dem0VR he was stopped and in custody

@nikolayevicmuhamedoff3889 3 года назад

Sir how much grams of filaments you used for one revolver you made in this video?

@medyk3D 3 года назад

I weighed it for you and it weighs 215 grams

@chemistryofquestionablequa6252 3 года назад

Would be pretty easy for convert the design to fire .22 or .25. Barrel and chamber liners would be necessary and a few other metal parts, but it should work.

@medyk3D 3 года назад

A lot of people are suggesting that. It's getting really tempting.

@marlondeanbellot.7945 2 года назад

Yep. Then we got a functioning firearm. Good enough for self defense. 2A my friend.

@chillchilli2671 Год назад

mold all the parts individually and cast with steel, boom! functioning firearm

@SamanKale-od5wn Год назад

@@chillchilli2671 hi mate wat do u mean by mold all parts individually and cast with steel..that sounds like really hard to do..any tips lol

@speedman69420 Год назад

@@SamanKale-od5wn i really dont think thats a smart idea

@Mishaho 2 года назад

Is there a list of screws and stuff that is needed? Video is great also.

@medyk3D 2 года назад

Here it is: cdn.thingiverse.com/assets/5a/d2/2d/d4/1c/revolver_exploded_2019-01-28.pdf Glad you liked the video, thanks. Btw: great avatar :)

@Mishaho 2 года назад

@@medyk3D my avatar represent my life

@medyk3D 2 года назад

@@Mishaho That sounds really challenging.

@inux3dmanufacturing 3 года назад

Awesome print! Well done! and very good timelapses :) You may want to lubricate your Z rods ;)

@medyk3D 3 года назад

Thanks for the reminder. I will clean and lube all the rods this weekend. By the way my x rods are grooved again.

@coldbeanz 2 года назад

Did you use a special kind of filamente or just normal filamente also could you use a crealoty endear 3

@medyk3D 2 года назад

Most of the parts can be printed with PLA. You can use PETG for the Cylinder-Stopper, Trigger, Hammer and Hammer_Rotator. Info from the creator: ABS/PETG filament: I heavily recommend you to use ABS for the Cylinder-Stopper, as PLA is not as flexible and will change shape under load pretty quickly. Also recommended for Trigger, Hammer and Hammer_Rotator. These likely work with PLA too (at least at first, long term is another story), but I have not tested. Many have reported, that PETG works too!

@coldbeanz 2 года назад

@@medyk3D sorry i am sort of new to 3d printing so i dont quite understand much of what you said but did you use. Metallic filement

@medyk3D 2 года назад

@@coldbeanz I used silver PLA for the most parts. But there are some that you need to print out of PETG or ABS (those are different kind of filament).

@meloneh5394 3 года назад

Hi do you know where i could find the screw list? The description got deleted and The exploded diagram image on the thingiverse file is really low resolution, and i cannot read the text on it, thanks in advance!!!

@medyk3D 3 года назад

There is a pdf under the thing files (revolver_exploded_2019-01-28.pdf): cdn.thingiverse.com/assets/5a/d2/2d/d4/1c/revolver_exploded_2019-01-28.pdf

@meloneh5394 3 года назад

@@medyk3D yeah, for some reason whenever i try to download it, it downloads as a really low resolution image, and i can't read it, even after downloading

@medyk3D 3 года назад

@@meloneh5394 Ok, no worries. I reuploaded the pdf to my blog and added the list: medyk3d.com/2020/09/3d-printed-revolver-single-action-prop-gun Google drive link: drive.google.com/file/d/1jgDOOmatyV_9LQQVwydKxun8ZQX1vr4M/view?usp=sharing 1x M5x50 03 ISO 4762 1x Spring 4x18 ( 0,4) 27 from pen ****) 1x ST4,2x18 (non standard length) 26 (ISO 7049) *) **) 4x ST4,2x13 (ST4,2x11 to ST4,2x13) 25 ISO 7049 *) 4x ST4,2x10 (ST4,2x9 to ST4,2x14) 24 ISO 7049 *) 1x ST4,2x7 (non standard lenght) 23 (ISO 7049) *) ***) 1x ST4,2x4,5 (standard length) 22 ISO 7049 *) ***) 1x ST2,9x7,5 (non standard length) 21 (ISO 7049) *) ***) 1x M5x30 20 ISO 4762 *) "Sheet Metal" screw (ST) Standardized available lengths: 4,5/6,5/9,5/13/16/ 19/22/25/32/39mm **) flat tip recommended ***) flat tip required For flat tips, get longer screws and cut them to the needed length. ****)outer diameter: max 4mm wire diameter: ~0,4mm length: min 18mm compressed: max 6mm

@SamanKale-od5wn Год назад

Hey great job..where did u put the spring???

@medyk3D Год назад

It's to tension the hammer_rotator, it's placed inside the body of the revoler under the rear sight. Take a look here: media.printables.com/media/prints/276918/images/2457455_790969fd-3ff5-441d-8137-704c14957e7c/thumbs/inside/1600x1200/jpg/img-revolver_internals.webp

@danksaucejeff5441 2 года назад

Nice

@medyk3D 2 года назад

Thanks!

@coldbeanz 2 года назад

How long did the assembling take also did you 3d print the bullets

@medyk3D 2 года назад

The bullets are also 3D printed. Assembling I guess was about one hour. If you are not doing it for the first time that would be a lot quicker. The most complicated part is getting all the screws and a spring.

@coldbeanz 2 года назад

@@medyk3D ok thanks

@user-oy7cc5qt5y 2 года назад

Good gun! Abs or pla?

@medyk3D 2 года назад

It's all printed PLA. It's just a prop.

@raphaelo7473 2 года назад

And do you need to make the screw shorte?

@medyk3D 2 года назад

I had to shorten a few of them.

@miltthomas31 Год назад

how does the hammer and trigger work together?

@medyk3D Год назад

More details www.printables.com/pl/model/276918-prop-gun-revolver-single-action and imgur.com/3nPtyNg

@voxhumana-qt4ki Год назад

go ahead, make my day

@heitornatali5042 3 года назад

nice

@medyk3D 3 года назад

thank you very much!

@Mackensp99 3 года назад

Where to buy bolts and screws from?

@medyk3D 3 года назад

Online or local hardware store :) I am from Poland and I bought it from Allegro (it's kind of Amazon here).

@DronkenDrenthen 3 года назад

Very well done. Now on to the next level. Make one again. This time from steel with a CNC machine.

@medyk3D 3 года назад

Sure, but there are only two problems: - I do not own CNC machine - It requires concession

@Alertacobra12 3 года назад

If only it were that easy

@iamv0id202 3 года назад

And create bullets with gunpowder in them

@thalilpumpkin 3 года назад

Bro I'm the 240th sub

@medyk3D 3 года назад

Awesome! Thanks. So only 10 more to the 250 subs giveaway. Where are you from?

@thalilpumpkin 3 года назад

Tuson arizona bro

@thalilpumpkin 3 года назад

I hope I win

@medyk3D 3 года назад

8 more subs to 250. Gratz on your 16 subs.

@djswagger242 2 года назад

The link to the files doesnt seem to be working anymore. Do you happen to have another way of getting the stl files?

@94Krumi 2 года назад

I'm also looking for it. would also like to have the files.

@medyk3D 2 года назад

I have no idea, let's ask @DeSteiner what happend? He is the creator and owner of the files.

@medyk3D 2 года назад

I messaged the creator on printables. There is only Winchester model on his printables www.printables.com/pl/model/30394-desteiner-model-1887-mechanically-working-winchest And also on MMF: www.myminifactory.com/users/DeSteiner There is nothing on thingiverse.

@grib868 3 года назад

Would this print on a flashforge adventure 3 lite?

@medyk3D 3 года назад

Yes, why not, but you would have to print shorter barrel probably. No other parts are longer than 150. And read the description on the thingiverse carefully. Share your results.

@grib868 3 года назад

@@medyk3D will do, thanks!

@akiras.9167 3 года назад

You just got a sub

@medyk3D 3 года назад

Thanks!

@iwasJay 3 года назад

i want to make this !! it looks really good . does it work as a nerf gun though ?

@medyk3D 3 года назад

No it doesn't work as a nerf gun. It only rotates the barrel while firing.

@iwasJay 3 года назад

@@medyk3D ohh i see , you should really look into making a nerf gun version if u get time . I wish I was that talented to modify it 😞.

@medyk3D 3 года назад

@@iwasJay Hmm that's sound like a fun challenge. Maybe Steiner3D will do it eventaully :)

@Lomhow 3 года назад

Finally a way to reasonably play Russian Roulette

@medyk3D 3 года назад

True :) Next time I can print semiautomatic pistol for those from Taxas: darwinawards.com/darwin/darwin2000-04.html

@nicksomething1703 5 месяцев назад

Where can I get the screws, having a hard time?

@medyk3D 4 месяца назад

Check your local hardware store or online. The full list of screws are in the description: www.printables.com/pl/model/276918-prop-gun-revolver-single-action I know it's hard to get all of them, I also had to cut them to size

@darek4488 3 года назад

What's the caliber? Looks like it would fit the .38 Special.

@medyk3D 3 года назад

The creator stated that it's .44 Magnum: www.thingiverse.com/thing:3004363

@darek4488 3 года назад

@@medyk3D It's says "...engraved Caliber 44.Magnum text on the other side". It doesn't say if it is the actual caliber. Could you measure it some day since you have it already?

@medyk3D 3 года назад

@@darek4488 I've measured the bullet and it's 0.448 inch in diameter. Is it ok? I can take more measurements/photos if you want.

@darek4488 3 года назад

@@medyk3D Pięknie dziękuję.

@medyk3D 3 года назад

@@darek4488 Proszę bardzo :)

@samuelschader1667 2 года назад

can you do the assemly SLOWERS so that we cna see how to assemble it??!!??!?

@medyk3D 2 года назад

I just used the pdf (cdn.thingiverse.com/assets/5a/d2/2d/d4/1c/revolver_exploded_2019-01-28.pdf) as a reference. Sorry for not making the assembly super easy to follow. It was my first time.

@TanNguyen-dy1il 3 года назад

How many day to make this gun?

@medyk3D 3 года назад

3D Printing all the parts takes about 25 hours.

@deeznuts23yearsago 11 месяцев назад

I am going to take this model and try to get it looking like the gta 5 heavy revolver mk2

@raphaelo7473 2 года назад

Another thing,can you do it with an ender v3

@medyk3D 2 года назад

Yes the biggest part is the barrel (the extended version is 200mm long).

@raphaelo7473 2 года назад

In the time lapse chapter what is the bottom thing?

@medyk3D 2 года назад

Which bottom thing? Brim? Skirt?

@raphaelo7473 2 года назад

The little plateforme?

@medyk3D 2 года назад

@@raphaelo7473 I guess you mean the brim - it adds extra area for the print to stick to the heatbed (making the printing part harder to tip over).

@MrGuiller93 Год назад

Hello. thanks for this. i print it and i love it... u do a fucking great job. thanks a lot

@medyk3D Год назад

Great. But just to clarify it: I did not designed it.

@jefe3856 Год назад

i have s question what type of screws do I need specifically

@medyk3D Год назад

It's right in the description: 1x M5x50 03 ISO 4762 1x Spring 4x18 ( 0,4) 27 from pen ****) 1x ST4,2x18 (non standard length) 26 (ISO 7049) *) **) 4x ST4,2x13 (ST4,2x11 to ST4,2x13) 25 ISO 7049 *) 4x ST4,2x10 (ST4,2x9 to ST4,2x14) 24 ISO 7049 *) 1x ST4,2x7 (non standard lenght) 23 (ISO 7049) *) ***) 1x ST4,2x4,5 (standard length) 22 ISO 7049 *) ***) 1x ST2,9x7,5 (non standard length) 21 (ISO 7049) *) ***) 1x M5x30 20 ISO 4762 *) "Sheet Metal" screw (ST) Standardized available lengths: 4,5/6,5/9,5/13/16/ 19/22/25/32/39mm **) flat tip recommended ***) flat tip required For flat tips, get longer screws and cut them to the needed length. ****)outer diameter: max 4mm wire diameter: ~0,4mm length: min 18mm compressed: max 6mm Visit the printables for more info: www.printables.com/pl/model/276918-prop-gun-revolver-single-action

@jefe3856 Год назад

@@medyk3D hello sorry but like I’m in America so I’ve gone to a local hardware store and went online as well and I think I need a conversion. I’m super confused because like I need a more descriptive length.

@medyk3D Год назад

@@jefe3856 You need to shorten the screws yourself. Take a look here: files.printables.com/media/prints/276918/other_files/2457556_ddbc4773-1e80-456d-949b-368c0b3d52de/revolver_exploded_2019-01-28.pdf#_ga=2.12820287.941795978.1674589848-1584770446.1648664576 Also from the description: 1 M5x50 screw 1 M5x30 screw 11 screws meant for plastic/wood (labeled "ST#x#" in assembly drawing) with a length of at least 20mm and 4mm in diameter, 3mm core diameter. Cut them to shorter screws according to the parts-list on the assembly drawing (link in introduction). Leave the tip flat after cutting, but screw an unmodified screw into every hole before, the screws will not be able to cut the thread themselves anymore afterwards. 1 screw meant for plastic/wood (labeled "ST#x#" in assembly drawing) with a length of at least 8mm and 3mm in diameter, 2mm core diameter. Also mentioned in parts-list. 1 spring as it is mentioned in the parts list. You will have to find a pen with a suitable spring, but it should be pretty common. M5 thread cutters for the Cylinder and the Body. Just screwing the M5s in without cutting a thread may work, but I have not tried it and would not recommend it. The ST screw are DIN 7981 / ISO 7049. I believe in USA they are called: Steel Phillips Round Pan Head Self-Tapping Drilling Screws Something like this: www.amazon.com/Guard4U-304-Stainless-Phillips-Self-Tapping-Assortment/dp/B09ZLCVGMD/ref=sr_1_22_sspa?crid=SWDEHG1OJ9A2&keywords=M4.2&qid=1674678023&sprefix=m4.2%2Bdin%2B7981%2Caps%2C162&sr=8-22-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyU0ZONUZNTUJPV1ZWJmVuY3J5cHRlZElkPUEwNTk2NjA3MlhXRlRDMDVMM1RPNSZlbmNyeXB0ZWRBZElkPUEwMDc3NTk4MVdOUDFRSjhMME9KJndpZGdldE5hbWU9c3BfYnRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

@medyk3D Год назад

@@jefe3856 You can also use any screw you have that will fit :)

@jenniferbradley3936 2 года назад

Where can I get the screws

@medyk3D 2 года назад

I got mine from Allegro (it's a kind of polish amazon). Here is the list of the materials: There is a pdf under the thing files (revolver_exploded_2019-01-28.pdf): cdn.thingiverse.com/assets/5a/d2/2d/d4/1c/revolver_exploded_2019-01-28.pdf Just in case I reuploaded the pdf to my blog and added the list: medyk3d.com/2020/09/3d-printed-revolver-single-action-prop-gun Google drive link: drive.google.com/file/d/1jgDOOmatyV_9LQQVwydKxun8ZQX1vr4M/view?usp=sharing 1x M5x50 03 ISO 4762 1x Spring 4x18 ( 0,4) 27 from pen ****) 1x ST4,2x18 (non standard length) 26 (ISO 7049) *) **) 4x ST4,2x13 (ST4,2x11 to ST4,2x13) 25 ISO 7049 *) 4x ST4,2x10 (ST4,2x9 to ST4,2x14) 24 ISO 7049 *) 1x ST4,2x7 (non standard lenght) 23 (ISO 7049) *) ***) 1x ST4,2x4,5 (standard length) 22 ISO 7049 *) ***) 1x ST2,9x7,5 (non standard length) 21 (ISO 7049) *) ***) 1x M5x30 20 ISO 4762 *) "Sheet Metal" screw (ST) Standardized available lengths: 4,5/6,5/9,5/13/16/ 19/22/25/32/39mm **) flat tip recommended ***) flat tip required For flat tips, get longer screws and cut them to the needed length. ****)outer diameter: max 4mm wire diameter: ~0,4mm length: min 18mm compressed: max 6mm

@blackrider6870 Год назад

Smith&wesson c 357 Mag 2.5 P ?

@medyk3D Год назад

The creator googled the dimensions of a 44.Magnum cartridge and built everything around it

@CraigsTheKing88978 3 года назад

would an ender 3 work

@medyk3D 3 года назад

Yes, absolutely. Just read the description on thingiverse and print slowly.

@isaacle2081 Год назад

is there links for the screws?

@medyk3D Год назад

Nope you need to gather them yourself and cut them to length. They are listed under 'What you need' section in www.printables.com/pl/model/276918-prop-gun-revolver-single-action

@unus_mundus137 7 месяцев назад

What is the name of the 3d program you are using ?

@medyk3D 6 месяцев назад

For design: Autodesk Fusion 360 or Blender For slicing: Prusa Slicer

@xrainbow-kq2ir Год назад

hi can you send me the files please ive been doing crazy reaserch to try and find it but i have only found a left handed version

@medyk3D Год назад

try here: file.io/fpHxpmz51xwb

@Zerophil_ 3 года назад

you could make the timelapses a bit faster.

@medyk3D 3 года назад

Thanks for the feedback!. The print was long and the tiemlapses also. Next time I will try to make it shorter.

@petrspacek5688 2 года назад

Thats cool i want hawe one peace🙏, pleas where i get the files 👏🙏🙏🙏

@medyk3D 2 года назад

Sadly the creator of the files has probably deleted them. But you can use the wayback machine: web.archive.org/web/20220315223240/www.thingiverse.com/thing:3004363

@petrspacek5688 2 года назад

@@medyk3D its not working 😭😭😭all files ar only 95 kB big and make sam error if i wont downloded 😰😰😰😰😰

@medyk3D 2 года назад

@@petrspacek5688 web.archive.org/web/20220107154158if_/cdn.thingiverse.com/zipfiles/38/9a/7a/dc/fc/Prop+Gun+%7C+Revolver+-+Single+Action.zip

@juanpaz342 Год назад

@@medyk3D thank you so much!!

@jkopguy6387 3 года назад

Where can I get one

@medyk3D 3 года назад

I'm afraid it's not for sale. But you can contact the creator of this design: www.thingiverse.com/thing:3004363 Or ask someone in your neighbourhood with a 3D printer to print one for you.

@funwithforky3430 3 года назад

Is there anyway I can have the link for where to bought the screws at?

@medyk3D 3 года назад

Obviously, but I bought it on Allegro (a polish equivalent of Amazon). If you are from Poland: allegro.pl/oferta/4-2x19-a2-blachowkret-leb-walcowy-iso7049-20szt-7287433617 The complete list of the screws can be found at the thingiverse description of the item: www.thingiverse.com/thing:3004363 under "What you need" section

@voldy3565 2 года назад

Do you think this'll look good if I paint the grip to look like wood?

@medyk3D 2 года назад

For sure! I just typed 'magnum 44 with wood grip' in google and I am not disappointed. Classy!

@FlameGuy23 3 месяца назад

Does it shoots?

@medyk3D 3 месяца назад

Unfortunately not

@ramcharger154 24 дня назад

Man slow down ! Are you twacked?😂😂❤

@medyk3D 21 день назад

Ok I will chill.

@BigNoobRoblox Год назад

What is the size of the gun?

@medyk3D Год назад

Well it depends on the barrel you choose. But it's more or less in the 1:1 scale.

@the_guy01 19 дней назад

Its can be airsoft gun?

@medyk3D 19 дней назад

Don't think so. You can always ask the creator: www.youtube.com/@desteiner1786

@lilskely6278 2 года назад

dude i cant make the cylinder work propetly );

@medyk3D 2 года назад

Why?

@lilskely6278 2 года назад

@@medyk3D Nothing i noticed i had the hammer not placed correctly plus was missing a piece XD opsss

@dennyismayadin8609 2 года назад

thingiverse delete your stl, please provide another link.

@medyk3D 2 года назад

I wrote to the creator

@DireAvenger001 Год назад

@@medyk3D did you hear back from him?

@limelight_lycro5905 2 года назад

There's only one thing that could make this better 3d printed screws

@medyk3D 2 года назад

The 3D printed screws that small would be hard to print using a FDM printer. And the probably not strong enough in the long run.

@Mo.English247 7 месяцев назад

Is it functional?

@medyk3D 7 месяцев назад

No. It's just a prop

@user-ck4zq6qk2b 3 года назад

could it shot

@medyk3D 3 года назад

No. It only rotates the barrel.

@madkvideo Год назад

What the hell happened to this model?

@medyk3D Год назад

No idea, seems like it was deleted. But I was able to upload the files here: drive.google.com/file/d/1zRBVCHNcHF9PiMEGYwRxQnkDyAqDD_ln/view?usp=sharing

@madkvideo Год назад

@@medyk3D Holy crap, thank you so much!