3D Printing: Epic Fail Pokeball on Raise3D N2+ with Orbpolymer

Подписаться 661 тыс.

Просмотров 185 тыс.

50% 1

3d printing is still more art than science. I was printing a Pokeball from Pokemon for my friend and her sons. What happened is best described as an epic failure. Here is what happened and how I fixed it!
Also, the Raise3D N2+ was incredibly easy to fix, even though it was my own stupidity that broke it. Big shout-out to Raise3D for the help, and thanks for getting my printer back on track.
DISCOUNT COUPON!
Shop at www.raise3d.com and get 5% off your order!
Use the code HIGHFIVE - only valid for the next 5 days!
High Detail Pokeball from Pokemon:
www.myminifact...
Affiliate Links:
== Patreon: 3d.pn/patreon
== 3D Printing Nerd shirt! 3d.pn/shirt
== Printed Solid: 3d.pn/printedsolid
== Matterhackers: 3d.pn/matterhac...
== Amazon US: amazon.3dprinti...
== Amazon Canada: amazonca.3dprin...
== Amazon UK: amazoncouk.3dpr...
Want to send me something for Fan Mail Friday?
attn: 3D Printing Nerd
509 NE 165th st
Shoreline, WA 98155
USA
Royalty Free Music by www.audiomicro....

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 401

@MakersMuse 8 лет назад

Omfg I lost it when the bed came loose XD Just did something similar on the Tevo because I was lazy and didn't use enough clips for the bed.

@brandon3883 8 лет назад

ROTFL same here, about the laughing that is. I've only ever printed 1 model with less than 4 clips, and that was purely bc I had to alternative and couldn't find a spot for more than 2...and it managed to shift ever-so-slightly at some point and left a nice, just-barely-noticeable band along the entire, huge thing. :(

@jokeikmezelfenmij1426 7 лет назад

Maker's Muse I don't have a 3d printer but I have a plotter cutter. things coming loose is both hilarious, depressing (such a waste of material) and terrifying (it can really do some damage)

@gigglesseven 7 лет назад

Maker's Muse my circular bed need to be clamped or I make spiral prints from the bed spinning

@iceedafurrie4631 7 лет назад

i once had my printers thermostat, fillament guide, spool break in one print. the spool fell off the table and yanked the nozzel block breaking many pieces

@SplicesAndCelluloid 7 лет назад

Usually when you talk about bed adhesion, you worry about parts sticking to the bed. Very rarely o you have to worry about your bed STICKING TO THE PRINTER. LOL!

@CammaProjects 7 лет назад

Thomas Piccione Man I've been watching it since yesterday. I'm dying ahahah

@SianaGearz 6 лет назад

And the culprit was still that part that got unstuck from the bed.

@LazerLord10 8 лет назад

It's not a failure, it's modern art!

@LazerLord10 8 лет назад

Anyone want some spaghetti?

@DangerousPictures 7 лет назад

go to thingiverse. there is a model called angel hair pasta... print it.

@byteofwood 7 лет назад

aren't you the one who made the Minecraft time lapse

@LazerLord10 7 лет назад

yes

@thehighqualitycat9512 7 лет назад

LazerLord10 mMmMmMMm SPOOGETY

@NeeraTheLynx 7 лет назад

LazerLord10 I some for lunch

@rich1051414 7 лет назад

Gotta love when you start a print at night, are too tired to make sure the raft properly sticks, and wake up to a 3 foot mess of neon colored spaghetti in the morning.

@uberblade1669 7 лет назад

Richard Smith I just started a 9 hour overnight print, the raft worked. Wish me luck.

@ImaginerImagines 8 лет назад

Thank you for sharing your failures as well as your successes. It is one of the things special about your channel. It is just as or more instructive to see what fails as well as what works. I surely appreciate it. I have a question. I am getting excited about 3D printing. I don't mind finishing work and want to be able to make table top miniature terrain and sci-fi/fantasy shelf props. I have plenty of tools, including a soldering iron and can self assemble with decent instructions. What under 800$ printer do you recommend that has decent print resolution and would be useful for someone starting out that isn't too hard to use and is pretty reliable. Thanks for your time.

@familytriate 7 лет назад

Hi, I have been doing some research for a similar printer, my 2 cents, Tevo Mini Monster and CR-10, maybe if you have more budget SeemeCNC V3, and do not forget the Original Prusa i3. All Except the CR-10 have bed leveling

@j.kerfoot8425 8 лет назад

I always tell my wife I meant to print spaghetti....and I'll be printing some meatballs next...

@N3KN1L 7 лет назад

Don't drink and 3D print xD

@3DPrintingNerd 7 лет назад

#truth

@GreyHulk2156 8 лет назад

I tried a 'light operation' while not properly caffeinated and now I've lost the heart and a kidney. Can't find them anywhere. So good advice there.

@DigBipper188 5 лет назад

I LOVE it when my bed decides "screw this I'm outta here" alongside the entire print... lul

@ChrisViral 7 лет назад

When the build plate got moved I was like FUUUUUUUCK XD

@ChrisViral 7 лет назад

Oh nvm... It's just clamped on there...

@3DPrintingNerd 7 лет назад

I thought that exact same thing when I came home and saw that.

@simonqwadjke-t5g 7 лет назад

"leave a thunbs up if i did a good job" wasnt the whole point of this video that you didnt do a good enough job? xD

@3DPrintingNerd 7 лет назад

EXACTLY! hahahhaa

@RansomMakes 8 лет назад

Epic Fails Happen. Sometimes I watch for hours because for I am worried it will fail, and then go to sleep and wake up to a fail. It happens. Glad you got it back up and running, Joel. Hopefully we can see a finished Pokeball from the Raise printer. #highfive

@sttrife 8 лет назад

I also tried to fix my E3D V6 once at a late hour in a frustrated mood with little patience... and I broke it...I completely agree with Joel. If you got a hot end issue late at nite, JUST GO TO BED and fix it in the morning :)

@MakeItWithCalvin 8 лет назад

One thing I would add in is keep a tap and die set that matches the threading your hot-end. A cheap but decent quality one is all you need. Use the tap to clean out the heater block/where the nozzle goes in and use the die to clean any external threads on say a heatbreak and your good to go! The less resistance/crap that melts into the threads the better plus the cleaner the connection the better the thermal transfer and less likely your going to get nasty jams in the future. Also a bit of extra insurance a bit of high-temp anti-seize on the threaded bits + the thermal sensor & heater block helps remove things in the future. As for don't work on stuff when your not there 100%... good gosh I can't stress that enough especially when your working with any kind of potentially dangerous machinery! I have caught myself doing all kinds of dangerous stuff when machining and not having my "head in the game" as they say!

@SinanAkkoyun 8 лет назад

This happens ^ when you use cura's support material xD

@patemathic 6 лет назад

Kura in Finnish means crappy and mud as well. Are you sure it's not Kura?

@crochetwithayden5123 6 лет назад

Bruh. It’s not kura.

@TheRealUmlat 8 лет назад

Joel, I truly appreciate when you show the failures. Makes me feel better when my prints fail!! #High5

@user-eg7sn8xc4b 7 лет назад

The clean time is gonna be longer than the print time

@3DPrintingNerd 7 лет назад

It sure did take a while!

@memesredacted 7 лет назад

i understand the troubles of trying to assemble stuff when its really late. when i assembled my anet a8, i didnt switch the power block from 220v to 110v so when i plugged it in, it fried the mainboard. i finally got it fixed but man did it suck.

@3DPrintingNerd 7 лет назад

+MemesAreCancer oh wow that would suck!

@memesredacted 7 лет назад

it also took 2 months to get a replacement because the people at gearbest kept forgetting to ship it. i sent an email around may 10th and didnt receive the new mainboard until a few days ago.

@rklauco 8 лет назад

I like that. thanks to your mistake, people will actually save money ;) You provide comunity service even when epicaly failing :) High five ;) Btw, was this the video you were filming while you appeared on Angus' channel?

@3DPrintingNerd 8 лет назад

Yes!

@shickster1 7 лет назад

Hearing adults use nouns as verbs makes me ill, it's bad enough to hear students do that. It's not some smug evolution of english, it just sounds like you learned to speak from a non-native or a toddler.

@micahgilbertcubing5911 7 лет назад

I was using my teachers 3d printer and when I checked on the print 5 hours later and it turned out that the bed had completely moved every which way

@Sol-hm7ol 7 лет назад

What are you talking about that looks great.

@NLTMW 8 лет назад

One idea for your rig ... if you can do so, can you run the fan on the 2nd hot end even if you aren't using it at the time? That way, if the primary fan fails, the second one should cause enough airflow across the fins to keep the primary/active one cool enough to finish a print. #HighFive

@anglegrinder 8 лет назад

this is a great model, can i get it on thingaverse lol

@carmelonazario8205 8 лет назад

Ah so you had an issue with your printer too. I totally agree, if youre sleepy or stressed with the job already, always good to just take a break (SLEEP!). I always come back with a new angle of attack and usually get the work done. Awesome vid as always! Love that you show your faults in videos, it really helps other geeks. Rock on bro!

@infinitygames6103 8 лет назад

Is that an eevee drawn in the background?

@3DPrintingNerd 8 лет назад

Yes it is!

@infinitygames6103 8 лет назад

Did u draw it or was it fan mail?

@3DPrintingNerd 8 лет назад

infinitygames It's a drawing from a coloring book that my daughter colored in a few years ago :)

@infinitygames6103 8 лет назад

Cool

@AbuzzDesigns 8 лет назад

Oh man! That same thing happened to us when our Flashforge nozzle got clogged, we didn't heat the nozzle enough and it snapped right off. So frustrating when you don't think things through first! And then you have to play the waiting game for replacement parts, with the printer staring you in the face every time you walk by, laughing (or crying) at your stupidity... Glad I'm not the only one who can't brain sometimes. Also, We're hoping to go to the NYC maker faire, if so, we'll see you there!

@ZombieMasterEd25 7 лет назад

have you ever made a Star Trek phaser rifle? I want to get into 3D printing print props for myself and fellow trekkies but I can't afford a big printer not with my fixed income unless it's worth it. I see some 3D printers selling phaser rifles but with super cheap crappy ABS that melts from paint with acetone. would you recommend a printer that could print a phaser rifle in parts and I want to use metal PLA weight and durability and I want to put a laser in the nozzle with a photo strobe I already set up the electronic now just need to figure out 3D printer part.

@bendix2648 7 лет назад

Okay nice job but what's about the Pokéball?

@b00sted_mx59 7 лет назад

you remind me of Markaplier sound like him as well. just got a monoprice maker select v2, love it

@3DPrintingNerd 7 лет назад

Technically, I'm older than him, so, he sounds and looks like me ;) hhahahahaha

@shurmurray 8 лет назад

It broke because you heated it in a torch too long.

@gigglesseven 7 лет назад

Shur Murray I used a soldering iron to clear a jam similar.

@shurmurray 7 лет назад

Soldering iron is maxed at 400C at best, when a blowtorch heats crap up to above 1000C.

@wordreet 6 лет назад

ROFL! Sorry. Hahahahahah! Sorry. Teehee! Sorry. I don't want to make one of those. Not the Pokemon thing or the bolognese Somebody remind me to buy some extra clips. . . Ppfffffffffffahahahahahahahahahahahahahh! My sides hurt! Sorry. X¬P

@NLTMW 8 лет назад

I feel your pain. I have broken a throat on my Prusa i3 clone. In my case it was a combination of my brute strength (stop laughing) and the cheap throat that is very thin at the heat break area. Luckily, I had already purchased a couple of spare hot ends, so, I just switched it out and was able to print again. I am developing quite a collection of spare parts, as there are not stores in my area that sell 3D printers or spare parts. #HighFive

@didierklein9025 8 лет назад

Epic Fail indeed! How come the plate came off so easily? It all started with a part detaching and then bam filament everywhere! Who is 3d printing and never had some spaghetti prints like this? Nobody! #highfive

@DangerousPictures 7 лет назад

with this fail "Bed adhesion" gets a completely new meaning

@3DPrintingNerd 7 лет назад

hahaha right?

@TheLeverMonkey 8 лет назад

I use a propane torch mounted to do this. I am yet to snap mine off. If it fails in this manner I wait till the next day when I am fresh. P.S. I am on my second hot end. replaced the factory end with a Matter Hackers Ev6, love it.

@DavidLeeMenefee 8 лет назад

WOW! In a kinda sick perverse way, it's kinda nice to know that you professionals have epic failures as well. Thumbs up..PEACE

@DaHaiZhu 8 лет назад

problem best that its broken. After flaming it, you probably made tons of carbon crap in the throat and it would have just jammed right up again.

@MrTlong2010 7 лет назад

Off to the modern art museum with this one!

@jockspice 8 лет назад

You know what they say; there are those that have had failed prints, and those who just haven't had one yet.

@GratinCheese 8 лет назад

+3D Printing Nerd I was wondering what printer you would recommend for around a 350$ budget or below, I doubt you will see this but I would love to hear your thoughts if you do! Thanks and keep up the good work!

@lewisprice2743 8 лет назад

Drfrankenstein9 ko

@lewisprice2743 8 лет назад

Connor T. Do

@lewisprice2743 8 лет назад

Connor T. Ha

@HappySlappyFace 7 лет назад

Connor T. get the 55$ printet

@Sinthist 8 лет назад

Hey Joel! Thanks for helping me fixing my printer (the leapfrog). I've been working on some game replica models. If you would like, I would love to send you one of the models so you can print it! :) See it as a thank you thingy. :P Keep up the amazing video's!

@NPrescott 8 лет назад

That's the best fail yet haha I would think they would have a sensor that would stop the head from moving if the plate came loose and started flying about like that. Nice fix Joel! :D Oh....Happy Belated Birthday!!!! 😄

@spikekent 8 лет назад

When you started by saying this was the most epic failure you ever had. I remembered you vid on the whole GMax hotend getting buried alive in plastic and you tried to melt it off with a blow torch. I thought this could not be worse than that, I guess I was wrong, it is at least on par :-) Glad you got it sorted, with great support from Raise3D. #Highfive

@alang6402 8 лет назад

There should be an app that sends your phone a picture of the build at an interval determined by the operators level of OCD and allows you to abort the print and activate the autodeclogging system remotely. There I fixed that (give myself a cookie).

@KlausJepps 8 лет назад

Been there lots of times with a gigabot xl which I modded to 1,75mm filament and 1,2 nozzle. You should always have extra hotends! get a blower to heat your hotend to clean it with a cloth and use a drill to bore the stuck filament out. You can work on your printer even when you and the printer is wasted, just always think twice about what you are doing.

@The_Traveling_Clown 8 лет назад

Yesterday (9/2/2016) I lost a four hour print I was gonna give to mu sisters youngest girl. I printed another jack-o-lantern soon after but darn it that was going to be a good print > :s . I will upload a video soon.

@jamesr.2017 6 лет назад

That just hurts my eyes.

@joshuaburton3535 7 лет назад

when you want to catch them all but fail

@JessVideoDude 8 лет назад

You're awesome brother, thanks for sharing this not so great 3D printing experience and tips on when to avoid working on anything really. When I'm not in a good place and take projects I usually collect some nice dings and scrapes :)

@FranklinHarding 6 лет назад

My biggest fail was a blob of about 96g of PETG... it actually melted the 3D printed x-carriage on the Prusa i3 MK3 and I had to print new parts. It also ruined the extruder.

@pierrelezan 8 лет назад

I've had the same issue with my fan and my hexagon hot-end (fan powered with 5v instead of 12v) and heat up again with the printer itself doesn't work, but the oven worked great to unclog it.

@jacksonwhiteley 7 лет назад

I built a diy kit printer and the only pre assembled part, the hot end leaked so I had to disassemble it, come on Tevo (good brand though). I have also woken up and checked an 8 hour print and found spaghetti, not fun I feel you.

@RichardT2112 8 лет назад

+Joel, welcome to my world :) #HighFive Brings new meaning to Pastafarian doesn't it? Hahaha

@rickseiden1 8 лет назад

I had to remove my fan to clear a clog (Wanhao Dup i3), and missed the screw. The screwdriver bit went into the fan, and broke off two fins. Just stupid.

@charveyneal 8 лет назад

If you watch the video again you will see that the root cause of this failure was the part in the upper right came loose from the bed. It then started printing in air (which never works well!) Everything snowballed from there. I have had this problem many times when printing multiple parts at the same time.

@dirishmac 8 лет назад

buwaahahahahaha.....adventures in 3d printing.. we have all had to dismantle heat head to fix clogs before... but most of us get it back together without destroying em ;) as always..awesome videos

@cheetahkid 8 лет назад

if you don't have any flame, I used my soldering iron and it works well unclogging the filament.

@shemp308 6 лет назад

Seems this would have been a really good time to have octoprint setup! At minimum you could have checked in on it. I am new thanks to you and have it setup locally so I can monitor progress it works and is easy to setup and use. It also save time copying from computer to chip!

@vehasmaa 8 лет назад

Perfect example how crap current 3d printers are. No safety features... :( Im surprised the printing platform moves out of place and it just keeps on printing...

@NJFoggio 8 лет назад

So you think that this is more epic than the time your gmax became engulfed in plastic. Iwould disagree acsept for the fact that you had only clipped down a sheet of BuildTak and not just adhered it to the build surface and then it came free and went on a Rollercoaster ride along with the rest of the spegetti.

@mrjoeyman 7 лет назад

Was it not possible to print with the other nozzle in the interim? I ask because I don't know much about the dual extruders. I thought you might have been able to print while waiting for the repair materials.

@gigglesseven 7 лет назад

my rostock printer only works when I'm medicated. I built it overnight while highly medicated and only prints successfully when I level and start the print the same way

@korhal2005 8 лет назад

Same thing happened to me. But it was a huge plastic ball on my whole print head. I ended up burning my finger by hot dripping plastic. I now have blisters on my finger.

@MarcoNoPolo 8 лет назад

Eh. Just a little stringy and some not so good layer adhesion. =Þ

@ouncesmusic 5 лет назад

I just came home to a plastic mass that was once the nozzle and heater block, it looked like the flood from Halo. It was because I turned the speed up too much before I left I'm guessing.

@kilroywashere3086 7 лет назад

2 Solutions which might help: Octoprint for print monitoring & Guitar string of the right diameter to feed through like filament after the extruder is heated up to clear jams.

@patrickhodson8715 7 лет назад

One of my favorite recent evolutionary trends in English is the verbing of nouns i.e. "Don't try to fix your printer when you're tired and you cannot brain correctly."

@timeslongpast 7 лет назад

Unskippable 30 second ad... ugh

@3DPrintingNerd 7 лет назад

CRAP. I thought I had those turned off. I AM SORRY. I just made sure they were disabled, try again.

@DaHaiZhu 8 лет назад

Joel, right, when reassembly you tighten the nozzle against the throat and not the throat against the heater block.

@RVJimD 8 лет назад

Nice thumbnail photo, couldn't watch the video because it had a mandatory 1:31sec Donal Trump video which I was NOT about to watch. I bet it was a great video!

@3DPrintingNerd 8 лет назад

+RVJimD IT DID? UGH!!! I am SO sorry. I don't get to pick the ads that are shown in front of the video. Those are suppose to rotate, maybe try again tomorrow?

@lunatec9550 6 лет назад

5:25 Ohhhhh I know your feeeeling. This happened to me too. ARRR

@z10productions12 7 лет назад

On my first 3D printer I was tighting the heat block down and broke the heatbreak before I even got to use my 3D printer just cause I was way to tiered to be working on my printer

@vandermore 8 лет назад

It's nice to see that I'm not the only one who has spectacularly failed prints. This comes at a perfect time since I'm attempting to print a model but the initial layer just didn't want to stick to the bed.

@Salrous 8 лет назад

I deleted my previous comment about R3DN2+ I will wait for more reviews and videos from you before I say anything.

@ethanlove9872 7 лет назад

this guy could be Markiplier's brother.

@3DPrintingNerd 7 лет назад

+Ethan Love right?

@vega1287 6 лет назад

i actually managed to fix my 3d printer at about 5 am and it turned out i was an idiot and didn't fully insert the ptfe tube and now i fixed it altough now the clamps holding the tube are now broken and wont let go of the tube

@StuffWithKirby 8 лет назад

You need to make a belt buckle with the big one!

@skirmisherssouthport5056 7 лет назад

The moral of the story is check your printer at least every 15 minutes. Do not leave the house whilst it is running or go to sleep as all FF printers have the potential to catch on fire.

@kalebwhittingstall2367 7 лет назад

oh, my god. this exact thing happened the second day I had my new anet a8 the troat nozel clogged and I took it apart and when putting it back together the throat nozzel clogged and it took me two months to get a new one

@TotoGuy-Original 7 лет назад

had a good laugh at the epic fail lol. look on the bright side atleast it made you a video!

@haydenc2742 8 лет назад

Yup, I get the "I can't brain today, I haz the dumb too" speaking of which, PLA, or ABS which plastic do you prefer? Just got my Anet A8 (acrylic prusa i3 clone) put together, my first roll was orb polymer PLA, ran great, so great, ate up a kg in a week, have 2 rolls of ABS inbound...recommendations?

@3DPrintingNerd 8 лет назад

I prefer PLA, but I've printed a ton with ABS. Check out Chuck Hellebuyck - he prints with a lot of ABS and can give you some tips!

@eekeek433 7 лет назад

There should be a stop mech sensor to tell the printer to stop if it has a issue anywhere within the printer as a fail safe. Don't know if 3D printers come with it now.

@Jaykav99 7 лет назад

This basically happened to me last night but I was only doing the benchy boat...Still took me two hrs to fix it lol

@rodline9027 8 лет назад

Sometimes an epic fail is enjoyable and educational. Sorry about the troubles. Thanks for sharing. #highfive

@mrcookiemonster4051 8 лет назад

Can both extruders reach the whole buildplate or is it like mine where the left extruder doesn't reach all the way to the right and vice versa.

@schwarzerritter5724 3 года назад

The robot apocalypse won't be caused by machines rebelling but by machines doing exactly what they are told to.

@PurpleHaze2k9 7 лет назад

It went "snap" because you heated it up like you did, it hardened the steel likely. Hard steel is generally more brittle.

@NveSmyrna 8 лет назад

That was so bad it could be considered modern art! Sign that puppy and sell it for charity! 😜👍

@Skammy5 5 лет назад

I did the exact same thing with my first hotend surgery. That was before I found 3DPN....

@sublimationman 8 лет назад

Joel, you should come to the San Diego Maker Faire Oct 1-2 at Balboa Park In San Diego CA

@3DPrintingNerd 8 лет назад

But, the New York Maker Faire is the same dates, and in New York!

@bruhmomentum5064 7 лет назад

The ad before this video was Joel endorsing Matterhackers. RU-vid did something right for once.

@Kl0rd 7 лет назад

Look into easy n network cameras. Extreamly easy to set up, and would let you keep an eye on your prints from your phone.

@Kl0rd 7 лет назад

Look into easy n network cameras. Extreamly easy to set up, and would let you keep an eye on your prints from your phone.

@APRigs 4 года назад

hahaha, i just did this exact same thing yesterday hahahahahahaha, im new to printing and this happend to me late at night as well 3am in the morning

@jeZZa7810 8 лет назад

i love your videos. iv got a i3 printer that i love to bits and you where a big help in helping me learn how to set up and use my printer

@sarahrenz8943 7 лет назад

Me: how do I brain properly? Brain: blo bla ble *BLAHHH* Me: well that's close enough.... try again next time. Brain: (sad bla) Me: sorry you're doing great Brain:( happy bla)

@3DPrintingNerd 7 лет назад

+Critter Jones hahahaha

@mcmccoy28412 8 лет назад

As I am new to 3d printing at home, with only a single delta printer, i am curious to know.... How did the clogged hot end result in the breaking of the support structures? Maybe I missed it in the video. It also appears that your print bed came loose from the printer and was dragged around with the nozzle? How was this addressed?

@3DPrintingNerd 8 лет назад

Support structure piece got knocked loose, THEN the nozzle dragged it around the build plate. The build plate is BuildTak on glass, and that's clipped into place. So, when the nozzle was moving with that one piece attached to it, the rest of the pieces were stuck down good, so the clips gave out.

@Moby41 8 лет назад

I still can't believe your wife lets you hang out with all these girl friends! All the married guys I know would have their head on a chopping block if they even spoke to another woman :/ Your wife is awesome :D

@3DPrintingNerd 8 лет назад

She IS awesome, and she is also friends with Jen!