3M Full Face Reusable Respirator 6800 

Does this in any way effect the good filter? I wouldn't think so.. but just curious if it reduces it's ability in some manner. That's a brilliant idea.. I imagine you're able to keep on using the expensive filters for a lot longer.

Working, trying to save lives!!!

right here

Ayeee we don't wear masks, we've stepped the fuck up and bought full face respirators.

This is the feeling I bought on lazada in China is very good to share with you: www.lazada.com.ph/3m-6800-reusable-full-facepiece-respirator-medium-size-7-pieces-set- including-3m-6001-organic-vapor-cartridge-3m-5n11-filter-3m-501-filter-retainer-1-respirator-2-cartridges-2-filters-2-retainers-i1190520912-s4201010937.html?spm= a1zawe.14297203.productReviewTable.2.61f04edfPt5Cnc

@@user-rw5be3um5e fake

Same here.

This is the feeling I bought on lazada in China is very good to share with you: www.lazada.com.ph/3m-6800-reusable-full-facepiece-respirator-medium-size-7-pieces-set- including-3m-6001-organic-vapor-cartridge-3m-5n11-filter-3m-501-filter-retainer-1-respirator-2-cartridges-2-filters-2-retainers-i1190520912-s4201010937.html?spm= a1zawe.14297203.productReviewTable.2.61f04edfPt5Cnc

Same. If there's a quarantine, or even a recommendation to wear masks, I'm not going outside with a surgical mouth and nose mask.

P3 is what it’s called in UK

Hi there, apologies for the very very late reply. There are no advantages with only using one side of the filters. The filtered side would be doing twice the amount of work to compensate and the user would find it harder to breath through. Recommended for dual filtered use only.

@@atadistributors1106 I bought this mask (new) but the plastic inside smells bad...i can not wear it....i washed it very good ..the box has a seal ?....because my box did not have...maybe it was used before....

Andy Dawe First off, let me say that I have a made in the USA, 3M mask. Not a Chinese knock-off. The 3M mask is high quality and designed well. If you get the right size mask and do a fit check to insure it is air tight to your face, you can work in high dust environments without trouble. The valves don’t let particles into your mouth. If someone told you that, they were probably using a damaged mask. The air enter through the filters and passes through the first set of intake valves that allow the clean air inside the window lens to prevent fogging. Then the filtered air passes through a second set of valves into the respirating cup over your mouth and nose. The exhaust you exhale goes out the bottom of the respirating space into the outside and and never into the window lens. Because if this design, all air in the mask is filtered and it mask never fogs. Hope this helps.

I bought mine for using while heavy duty sanding with an angle grinder on cedar, and that fine dust does not get past the filters. You have to have the filters on for any sort of grinding. The flap for the exhaust from your mouth is only one way, out. So how could particles get in?

Chris Donaldson when you are close up working in confined spaces that’s when, also some are wondering it could be the seal isn’t designed good enough when moving about and when you’re face fitted by health and safety representatives you are sat down in a chair wired up to a computer, to many people at our work complaining about them and that’s with the best filters you can get for these 3M full face masks

Perform a fit test that will answer your q

Should be p100 filters

N95, P95, P100, etc.

P3 filter or better

how long are the p100 magenta filters "good" for?

totallyfrozen I think the idea is that it filters out the droplets in the air and the spittle (not the actual virus itself, as you say)

Hey, Just wondering if you found filters, I am in the same situation.

ebay.

This is the feeling I bought on lazada in China is very good to share with you: www.lazada.com.ph/3m-6800-reusable-full-facepiece-respirator-medium-size-7-pieces-set- including-3m-6001-organic-vapor-cartridge-3m-5n11-filter-3m-501-filter-retainer-1-respirator-2-cartridges-2-filters-2-retainers-i1190520912-s4201010937.html?spm= a1zawe.14297203.productReviewTable.2.61f04edfPt5Cnc

Of course ff-403 series. But it's really specialized. If you are not working in toxic environment, 6800 should be fine.

Its considered bayonet, not 40mm

Yes, but be sure you are buying compatible, so - it means developed by 3m.

selling mask for 1000 + 2 sets of filters, hit me up

@@aap2827 i dont think youre trustworthy lol

Yeah, even if I'm not in Wuhan, I bought one.

I don't want to die

I bought two half mask type. Now the full mask and the half mask are all sold out!

This is very much overkill for the Wuhan Chinese coronavirus. These masks are between $100 to $140 without any filters. Now the filters are all but impossible to get. I wouldn’t waste the money on this for coronavirus.

@Predator I bought it from my local 3M reseller, so there's no link.

no, wearing glasses would create a void in the seal via the glasses arms going to your ears.

ofc

If you use right filters.

You need to buy 5N11 Filter with retainer or 3M™ Particulate Filter 2091/07000(AAD), P100

If you use it for COVID-19, then you have to disinfect the entire mask after each use. If you use filters with a plastic cover, then you can wipe the plastic off with disinfectant. Replace the filters when it becomes hard to breath through.

@@DonnieBarkie Had not thought about that...So if I use series 2000 filters (p100) do I need to throw them away when I get home? I assume there's no way to disinfect those.

Is possible to do sterilization? Please suggest which methods Gas or Plasma sterilization?

hm. Replace them / get a new one? Idk the price tag :/

It depends on the filter/cartridge. You wanna use at least a N95 filter, a P100 is the best one you can get.

AliExpress

Hi Orlando, due to the 6800 being a full face mask, users are unable to wear a hard hat with this system. Hope this helps!

No, unless is a cowboy hat.

Yes, they are.

MSA is crap