4'' Table Saw - Byrnes Model Machines - overview 

Отличный станок, как раз для шикарной мастерской. С огромным удовольствием смотрю ваши ролики. 👍

Good review! The micrometer impressed me, which I find really useful. Thanks for sharing!

Настолько подробного и всестороннего обзора я давно не видел , спасибо и конечно подписка !

Got my table saw yesterday. Looks great and everythning feels precise. Have to test it this weekend :-)

Дякую за детальний огляд, щей рідню. В планах на майбутнє є зробити щось подібне. Дуже сподобався ліфт підйому пилки. Вам творчих успіхів і всього найкращого.

Thank you. I own one and many accessories and love it! I just need a net for catching the flying cuts!

I have owned this saw for over 10 years for making dollhouse furniture and I love it. As a machinist I have gone over it checking alignment, squareness etc. And I am impressed with its accuracy. I couldn't find anything wrong. The eraser on a pencil makes an excellent push stick. I also use a strip of 1/8 inch Baltic birch with silicon on one edge. For blades some are screw slotting blades, the thinnest is .008 inches. (From Thurston). This saw will cut down the centerline of a sharpened pencil without breaking the lead. I have made a lot of jigs for this from plexigass since I have a lot of access to scrap. For glue I use glacial acetic acid. Finally I'll tell you something nobody else knows. Cut a strip of 1/8 inch thick wood to snugly fit in the right side miter slide and let it stick out the back a bit. Slide the fence over untill it touches the strip then lock it in place. Cut a strip of wood and measure it. It should measure 0.500 inches. If its off change the blade thickness. Lift the strip and move the fence over untill it stops again. It should be 1.000 inches or close to it. That's the fastest way I know to get a 1/2 inch wide strip.

雙手千萬別離開圓鋸片太近唷！！ 😊

Good review. The micrometer helps a lot I have the circular saw from Proxxon and it is not always easy to adjust the cut measurement.

I was impressed by the capabilities this table-saw. There is also micrometer, if you want you can cut the strips of the thickness you want. I don’t think there are such particular companies in Europe. In Italy there is Cremona Tools that build professional tunnel. Congratulations again for your table-saw. Escuse me for bad english. 😀👍👍👍👍

That's really a great piece of engineering, I have a basic Proxxon, no blade height nor tilt adjustment, but this seems much superior in quality and flexibility! All of your kit for the price of...? Indeed, thank you for the review

Você é uma excelente profissional e professora, parabéns!!!!!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻😍😍😍😍😍😘😘😘😘😘😘🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

Great review - just what I was looking for.

Merci pour la démonstration. Je viens de recevoir la mienne et j'adore!

Great commentary Olha.

Belle présentation pour cette scie circulaire qui ma l'air d'être super et simple d'utilisation !

Thank you for this review!

Благодарю за обзор! Буду заказывать!

Очень смачный видеообзор.Снято красиво и очень профессионально.

Спасибо за обзор!!

Byrnes makes a great saw. At this point, I must ask two questions: 1) how did you become involved with ship models? 2) your work suggests a professional effort over a hobby. Do you build on commission? Sell your work? Thank you!

Вы умница!!!

Thank you for the video.

'Excellent review.

Ольга,-станочек шикарный !!! А в таком не стандартном положении удобно резать под углом? С приветом HDIV.

Good review. Have you compared this one to Proxxon table saw FET. It looks more silde than Proxxon, but s does the price.

Отличная вещь! Только нужно доп.кожух на движок приделать. Чтобы древесная пыль и стружка на него по минимуму попадали.

Good effort no doubt about it. In regard to the sliding table I assume that the height / thickness of the wood that can be cut is reduced by the thickness of the sliding table which is ???????? It states on the Byrnes Website that this machine can cut up to 15/16ths of an inch (23mm) thick material. I am guessing that the sliding table base is about 1/8 th of an inch but it would be nice to know for sure. Thank you once again for a comprehensive review.

Magnífico equipamento!!! Onde se compra?

Very nice!

Thank you for such a thorough review. I bought my Byrnes table saw in 2016 and it is still working flawlessly even on hardwoods. A couple of points… 1) Mr. Byrnes also sells a version with an extended 18” table. I have that version and find the additional 6 inches to be very valuable. 2) There is no riving knife and so the wood, on thin cuts, tends to fly back towards you. For that reason, I ONLY use the saw with a foot-switch so I can turn off the saw as it cuts through the final fraction of an inch. This will prevent/minimize any fly-back of the wood. 3) In one of your cuts, you use the miter gauge with the wood pressed against the fence. That is very dangerous since the wood can get trapped and break apart. You should only use the miter gauge or the fence, but NEVER both.

even tho i don't understand what you said nice work . i would like to buy one can you tell me where i can find it .

Hi, could you please tell me which accessories are included in the standard equipment of the saw and which accessories have you purchased additionally?

Ольга, доброго Вам дня 🤗. Дякуємо за те, що Ви ділитеся своїми знаннями 👍. Підкажіть, будь-ласка, чи можливо використовувати цей станок в квартирі на балконі ? Який в нього рівень шуму ? Чи ним необхідно користуватися лише в нежитлових приміщеннях ? Та ще, підкажіть, будь-ласка, де його можна придбати ? Буду дуже вдячний за Вашу відповідь 🤗

Very good review of this saw! I have a question though. On a full size tablesaw, the operation you are doing @ 5:17 is considered super dangerous! The thicker piece always being placed between the blade and fence so the thinner piece can fall away from the blade, and a push stick is used to push the bigger piece clear of the blade. If the thinner piece is between the blade and fence, there is a huge chance of kickback when the cut is completed because there’s no room for a push stick, and the thinner slice, being pinched between the fence and rotating blade gets shot out of the saw toward the operator at warp speed! My question being can the micrometer be moved to a location that would the thin piece to be on the far side of the blade from the fence? I really like this saw, but I don’t like what I see from the micrometer part as far as operator or bystander safety! Thanks!

А какая толщина дюралевой пластины в основании торцевальной каретки? Попробую себе сделать такую.

Hi again, I am already in the Byrnes club. Could you please explain or possibly make a short video on how to change the blades on this saw? Should I first unscrew the table or should I get there from the bottom? Do you use the regular blade that comes with the saw in this video?

You really do get what you pay for. The only thing I would different if I was to be the designer is to use two miter gears to drive the elevating screw. That way the elevating handle could be graduated in set amounts. Maybe two other things. A tilting blade instead of a table. Also a riving knife. A handy feature to have on the longer table version might be a way to mount a 3mm/1/8th" rotary tool for routing. But extra features cost extra ¥£€$. Not in materials. The cost is in the labor.

Great saw...great demo....I'm a scratch builder my present saw is a problem...thx

Ольга, приветствую. Практический вопрос: на сайте есть 2 варианта столов 12 и 18”. Вы похоже, используете 12 дюймов. Из вашего опыта этого достаточно или лучше заказать 18?

Hello, This Serra seems to be pretty accurate. Is it sold on Chinese websites? Thanks

Как вы делаете конусные мачты? Есть какой-то станок или по старинки ручками?

I own one of these and have lost it! I moved house and packed it in a box and put it in a safe place but cannot find it after two years. I’m so distraught because it cost me $1000 in New Zealand. It had all the accessories as well. I’m still looking🙈

Buonasera, e fantastica, dove si può acquistare? Grazie Danilo

I was wondering if anyone is aware of a comparable micro saw available today since there has no indication that anyone is taking over production of the Brynes saw...😣

اريد ان اشتري هذا المنشار اين يباع وكم هو ثمنه وشكرا I want to buy this saw Where is it sold and how much does it cost?

З святом, Незламна!

Where could I buy the blades? Thank you

Onde posso comprar e preço

Where can I buy this saw in Australia

На Бернсе нет расклинивающего ножа. Случаются ли обратные удары?

boa noite, me interessei na maquina, como faço para comprar ?

Where is it possible to buy?

Use a push stick for ripping and save your beautiful hands!

Добрый день. Подскажите где можно купить станок?

Hola donde comprar

cual es el precio de esta mini sierra de mesa

Did you ever consider the 18" table version?

bom dia, onde comprar essa maquina?

Приветик,как называется эта модель,марка призводитель?Хочу такой же

Onde comprar a serra, qual o fabricante e o país de origem, moro no Brasil, obrigado?????😘😘😘😘😘🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

i want buy in india delhi

Can you pls tell me the weight

Cuanto cuesta?

사고싶다..

А, где купить в Украине?

I can't find any mini saw table that provides a 1/8 Kerf blade. Wasted my money on two products so far. and it appears this, proxxon and microlux don't offer 1/8 kerf blades either. Not useful if I can't match the kerf on my standard table saw for cutting kumiko strips

Я так же держал рейки, когда распускал на мелкие и в конце среза палец соскочил и я остался без кончика пальца. Лучше коретку сделайте.

Ольга а вы не пытались самому делать парусники а не из наборов с вашими инструментами можна начинать делать

Кстати, китайцы передрали эту циркулярку со снижением качества и цены, опасайтесь подделок! By the way, the Chinese plagiarized this circular with a decrease in quality and price, beware of fakes!

too bad these were great but you can not get now hes passed away

This saw is frighteningly expensive and out of reach for young modellers. It is only accessible to well-off people (or singles) or retirees with time and money on their hands. I am puzzled tho': it's not for kit builders, but for scratchbuilders.

Zdravstvuyte Olha! Gde mne kupit takuyu mashinku? V internete ne nashel. V Ameriku kak mne zakazat? Spasibo zaranee. Farhod. hamraevharhod@gmail.com

die Maschine ist ja toll, aber die Benutzerin hat wenig Ahnung vom Sägen

DONT EVER PUT YOUR FINGERS SO CLOSE! use spare wood or something, that was very stupid

Looks like a toy to me

İm used dewalt dwe7492 😅

I'm unlucky . I live in Belgium and not possible to get it.🥲👋