Тёмный

4K ✅ Engine Rebuild JD PowerTECH 4.5L 🔥John Deere Engine Overhaul 🔥NEW: Cylinders, Pistons, Gasket 🔥 

BGFarmerJD
Подписаться 3,9 тыс.
Просмотров 115 тыс.
50% 1

🛠️ Engine Repair Fixit John Deere Telescopic Loader Engine 100HP ‪@BGFarmerJD‬
🔥 Do not forget to 🔥 SUBSCRIBE 🔥 to the channel !!!
Coming Soon Full video
4K ✅Engine Rebuild JD PowerTECH 4.5L 🔥John Deere 3420 Engine Overhaul 🔥NEW: Cylinders, Pistons, Gasket 🔥Bulgaria, Kubrat
We repaired the engine of the Telescopic Fadroma alone.
Problem: It raised the antifreeze to a very high temperature above 120 degrees Celsius. And it was putting pressure in the Antifreeze Expansion Vessel. There was no problem with starting the engine or running it. After we removed the head and found that the head gasket was burned. It was putting pressure from the Cylinders in the Cooling System. The head didn't need grinding. Only the valves and the valve beds were fitted with a special fitting device. Then we took it out to check the cylinders and found that they were worn out, so we replaced a whole set. Pistons, Shirts, Gaskets and Gaskets. We have bought English brand Analog in high quality as the original parts of the brand ANGLO Agriparts ENGLAND. It cost us about BGN 1,500 ~ EURO 750
I hope you enjoyed the video, if you subscribe to the channel I will be happy. If you have questions about the repair of the engine Write in the Comments or if something is not clear in the video. I hope I was helpful with this short video. Expect more similar repairs in the Channel.
Devices used to capture video are:
1 - Apple iPhone 11 Pro 256GB
2 - DJI Phantom 3
3 - GoPro Hero 4
4 - Apple iMac 27" 5K
Video Editing: Final Cut Pro X
Music: No Cpyright Music
|--------------------------------------------------------------------------------------------------------------|
►Like,
► Comment,
► Share,
🔥 SUBSCRIBE 🔥 for Channel: BGFarmerJD
/ @bgfarmerjd
Social Media:
►I N S T A G R A M - / bgfarmerjd
►F A C E B O O K - / bgfarmerjd
►T W I T T E R - / bgfarmerjd
|--------------------------------------------------------------------------------------------------------------|

Авто/Мото

Опубликовано:

 

4 фев 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@KETO_DIET
@KETO_DIET Год назад
I might be buying one of these engines to put in a Skid Steer. Nice to see it all apart. Looks like it's easy to work on. Supposed to be a very good engine according to what I've read about it.
@KS-cu1zc
@KS-cu1zc 2 месяца назад
very nice but would be even better if you showed more of technical detail on install rings & piston facing. & torque. thx
@oscareduardo3050
@oscareduardo3050 Год назад
Explained at a technical level 🤙👊 a question friend, I did the reconstruction to one of the same with its complete packing liner kit and work on the cylinder head (replacement of guide valves and rubbers) plus a new turbo compressor, but the engine was leaking oil from the exhaust manifold more smoke what could it be??
@maxpuppy96
@maxpuppy96 2 года назад
10:41 Good way to break a ring.
@lotharthalmeier9626
@lotharthalmeier9626 2 года назад
unbedingt den zylinderkopf planen da immer am feuerring der kopfdichtung eingearbeitet! sonst hält die kopfdichtung keine 1000 stunden!auf den videos sieht man sehr schön dass die planfläche schlecht ist.
@SantoshPal
@SantoshPal 2 года назад
Nice video #santoshpal
@thetzawoo2181
@thetzawoo2181 5 месяцев назад
👍
@user-fd1cj7ko3u
@user-fd1cj7ko3u Год назад
May the peace, mercy, and blessings of God be upon you. Is it possible to tighten the engine head bolts, the crankshaft bolts, and the arm bolts? How much is the tensioning force of the John Deere 405L engine? Thank you
@rogeriozaduski8932
@rogeriozaduski8932 Год назад
O meu amigo se tu puder nos mostrar a camisa com os aneis de borracha pous tem varias cores qual a sequencia de colocaçao 👍se puder agradeço pois tenho um 5700 pra montar.
@aisyahsyahsamsul533
@aisyahsyahsamsul533 2 года назад
Cara pasang piston gimana posisi nya gimana mau tau terbalik atau tidak
@jesusmariaflorez7327
@jesusmariaflorez7327 Год назад
Necesito saber sobre el cindrode la tapa hidraulica
@arnulforuizramirez7268
@arnulforuizramirez7268 Год назад
Quiero saber la altura del block y la camisa de un motor powertec de 6 cilindros
@marinobates7694
@marinobates7694 3 года назад
What kind of Coolant are they using in the engine
@arnulforuizramirez7268
@arnulforuizramirez7268 Год назад
La altura de la camiza y blok
@arnulforuizramirez7268
@arnulforuizramirez7268 Год назад
Muy buen
@jorgeluismunozcervera1370
@jorgeluismunozcervera1370 2 года назад
Quién me podrá dar el torque de vielas de un 4430
@arnulforuizramirez7268
@arnulforuizramirez7268 Год назад
Quero ber cono se colocan las camizas
@arnulforuizramirez7268
@arnulforuizramirez7268 Год назад
Como
@alexkayidri7411
@alexkayidri7411 Год назад
Assembling karaoke generator
@johnboyington3456
@johnboyington3456 3 года назад
Wow, to go through all that time and expense and then lap the valves? Lapping valves is never a good idea- valves and seats need to be refaced properly with the proper angles which are usually 1 degree different from each other.
@Levi-vf1fh
@Levi-vf1fh 2 года назад
I don't see what's wrong with valve lapping
@jarepair7429
@jarepair7429 Год назад
Never trust anyone wearing sandals to rebuild an engine. This is wrong in so many ways.
@ivanvillamilrey
@ivanvillamilrey 11 месяцев назад
🤣🤣
@marcosortiz9912
@marcosortiz9912 2 года назад
sinmiedo
@pbmanf1
@pbmanf1 9 месяцев назад
Hillbilly rebuilder
Далее
JD 6420 Head Gasket Job
15:02
Просмотров 16 тыс.
Ютуб был хороший...
00:52
Просмотров 344 тыс.
I Build REAL V8 Engine | Assembly and RUN
14:56
Просмотров 1,4 млн
john deere montando camisas y pistones
13:32
Просмотров 24 тыс.
John Deere 4010 Engine Rebuild
23:54
Просмотров 390 тыс.
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 3,9 млн