4Runner With KDSS Gets A Leveling Kit Installed | Customer Installs EP1 

Nice I have a rig with KDSS good to see the content

Thank you for this video, good job guys 👍👍👍

Thanks for your quick response. Unfortunately it doesn't. I have the Bilstein adjustable front shocks. I cut the sides off, got longer bolts, added spacers over the bolts so the TRD skid plate would sit lower and the KDSS knuckle would still hit the plate, even when I would go over a speed bump. I actually had a friend fabricate a box ,on the plate, under the knuckle to give it room so it wouldn't hit. That, so far, seems to have helped. Am I correct in saying that there is NO aftermarket skid plate that will work?

kick ass channel

I did the exact same thing to my TRD skid plate and the rear bolt on the KDSS knuckle still hit the plate

Do you guys sell the KDSS spacer and 3,2 ready lift for 5th gen 4Runner ORP? It is impressive how meticulous, careful and clean you guys are. I so wish you were here in Cali.

I like the running boards what are those?

I didn’t loosen my alignment cams.

Does the 2" level make the front a little higher than the rear? I've seen leveled 4Runners that the front looks a little too high .Thx

What kdss spacer are you using?

Why wouldn’t a spacer be installed on both sides?

Do the kdss spacer and diff drop kit come separate? On your online store its says that leveling kit is meant for without kdss. Is it still ok to use as long as you have the other kit?

Went to Cali raised to get adjustable 5100 on my kdss 4Runner I don’t think they needed spacer.

A little late on watching this video, but how do you guys personally think the level looks with those 265/70/17's? My biggest drawback with doing a front end level is that I'm running brand new 265/70/17 AT tires and don't want to invest in 285's at this point. Will my 265's look overly bad with this level (of course, in your opinion)? Thanks!

I just grabbed a 2023 Limited with 6 miles on it 2 weeks ago. I don’t want to do a bunch of hacking on it. But I’m curious about what size wheels and tires I can run with just a leveling kit. I want to fill out those wheel wells a little more. Diameter, width and offset limits. I’m willing to go with a smaller sidewall.

Hey this is somewhat related to this video. I have the OME BP51 kit. I have not installed it. But I didn’t get one of those spacers that you highlighted at 3:20. Is that something I should look into before installing it? Did anyone else with this lift get one those spacers in their kit? Sorry for the potentially noob question but this is ALL new to me.

is the rear lifted or leveled to fit the 275/70 or is it stock hieght? thank you.

spacers? why?

Hello Works for Toyota 4Runner 2016 SR5

Is this a 2inch leveling kit?

can yall update the website for the kdss spacer?

Hello. Do you have interest in testing our Toyota 4 Runner product? If so, please reply to me.

I have KDSS and installed a Eibach Stage 2 Pro truck lift with SPC UCA's. I was told that I wouldn't have issues but I am getting lots of binding noises when turning on angles mostly. Do I need KDSS Spacers in front and rear or just the front?

Where is the best place to get a kdss spacer also what about the bushings?

What kdss spacer did you use in the video? Also, is seams like you only install a spacer on the passager side, is that correct?

Link to the kdss spacer?

Why did u guys do a similar video installing a leveling kit and you used swaybar brackets to adjust mounting but no spacer. Then this video u used the spacer but no brackets? Which is it? Do I need both? 1 over the other?

I have yet to find a skid plate that works with the front KDS System. Do you know if there is one?

Perfect...thx guys

Awesome job

how tall is the lift and is it affecting the sensore in the front? I just won a 2023 SR5 from an auction and it`ll arrive in aprile to me. I want to do a lift but I read everywhere that even a 1 inch lift ruins the sensor readings and it has to be reprogrammed or something???

So i just bought this leveling kit from you guys and installed it the other day. However i didn’t mess with any of those bolts for the alignment, should i have? I’ll be getting larger tires and an alignment within the next few weeks

I’m not finding the spacer for the KDSS on the site. Is that needed for a 2023 4runner TRS Off-Road Premium? I just bought it like two days ago and I’m learning about all the systems.

Sooooo many better options than a spacer. Spacers are crap.