Тёмный

4WD DIY Smart Car Chassis Kit || Assembling & Installation 

JR-ECT
Подписаться 1,5 тыс.
Просмотров 4,5 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 17   
@youthefunggoal7681
@youthefunggoal7681 4 года назад
wow cool naman nyan..
@JRECT
@JRECT 4 года назад
Salamat po
@ramanateja2193
@ramanateja2193 3 года назад
At 2:53 you said to solder the wires with the motor right. Can't we just connect them without soldering ??
@JRECT
@JRECT 3 года назад
If you connect the wires without soldering it can loose for some time, that can cause the motor not to properly work, that's why it is advisable to solder it.
@ramanateja2193
@ramanateja2193 3 года назад
@@JRECT Thank You Very Much For your reply
@The_vigilant.
@The_vigilant. 3 года назад
Bro does the gear motor have a plus or minus please tell me so I don't make mistake
@JRECT
@JRECT 3 года назад
hi, for the motor there's no indicator for the polarity, based on my experience in terms of soldering the wires to the motors, if you solder red wire in the right side and black wire in the left you must do the same thing for the other motors, so it will be the same rotation when you placed the motors and test it. kindly check my other video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-L1Yvs3njrAc.html how to connect with L298n motor driver
@The_vigilant.
@The_vigilant. 3 года назад
@@JRECT thanks bro
@The_vigilant.
@The_vigilant. 3 года назад
@@JRECT thanks for the motors and bro I have made a radar project it consists of The servo,Arduino Uno, breadboard,some jumper wires MM and MF jumper wires and sonar sensor so I did all of it and the servo was spinning with the sonar sensor but it wasn't detecting the object Which came Infront of it I also installed the Processing 3 software but the readings were stuck on 1 place please help me
@joseantoniomartindelarosa2279
@joseantoniomartindelarosa2279 3 года назад
Hola como puedo obtener el proyecto para yo montarlo gracias
@ramanateja2193
@ramanateja2193 3 года назад
Bro, can we use an Arduino & a 9V Battery connected through an adapter directly, to run this car ??
@JRECT
@JRECT 3 года назад
Yes you can connect 9v, but just make sure that the 9v battery you will use is good and take note of the capacity, it can drain the battery quickly.
@ramanateja2193
@ramanateja2193 3 года назад
@@JRECT Thank You Very Much !!!
@ramanateja2193
@ramanateja2193 3 года назад
Could you also please put the link for this kit along with its price ??
@JRECT
@JRECT 3 года назад
hi, if you are located in UAE, check out store.techmaze.ae
@joseantoniomartindelarosa2279
@joseantoniomartindelarosa2279 3 года назад
Como puedo obtener el proyecto para yo montarlo gracias
@JRECT
@JRECT 3 года назад
Hi, check this link for the project that you can mount on it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-L1Yvs3njrAc.html
Далее
Arduino 4WD Obstacle Avoidance Car
54:33
Просмотров 95 тыс.
Random Emoji Beatbox Challenge #beatbox #tiktok
00:47
Assemble a 4WD Robot Smart Car Chassis Kit
7:22
Просмотров 63 тыс.
Building a Tiny Office Pod Under My Stairs
51:47
Просмотров 7 млн
TESTING INSANELY STRANGE FIREWORKS…
54:31
Просмотров 7 млн
3 Hours vs. 3 Years of Blender
17:44
Просмотров 5 млн
Tutorial for 4WD Car Kit FNK0041
6:19
Просмотров 19 тыс.
I Made A Rotary Vane Engine Prototype
31:27
Просмотров 245 тыс.
ROCKET that LITERALLY BURNS WATER as FUEL
19:00
Просмотров 3,1 млн