4x4 PTO Driven Timber Trailer BUILD Ep.3 - Chain Tensioner etc.

Подписаться 932 тыс.

Просмотров 3,7 млн

50% 1

4x4 PTO driven timber trailer tandem axle build continues. Welding on the bearing block bolts on the S355 chain housing sidewalls and bearing block flanges. Cutting out chain tensioner parts on the homemade CNC plasma table. Using 6mm S355 steel for the tensioner box parts. Sprockets and bearings are off-the-shelf parts I ordered from a farmer store. This 100mm chain tensioner sprocket with the chain tensioner box mount will be located inside the main chain housing and it'll move up-down and tension the chain via bolt attached to the lid I'm yet to make. To be continued. Stay tuned!
Trailer specs:
28x11-14" tires & 14" rims
1450mm/57" wide; length and height - unknown
tandem axles with homemade chain housings
BMW E39 530D differential with 2.81 gearing (identical to the UTV diffs)
hydraulic crane with a boom & grapple for easier log loading & handling
independent hydraulic power pack
radio controlled hydraulic winch on the boom
load capacity - 1-1,5 metric tonne
Stay tuned for the next episode & thanks for watching!
My other videos: www.youtube.co...
Support me on: / donndiy
Follow me on: / donndiy
4x4 PTO Driven Timber Trailer BUILD series: • 4x4 PTO Driven Timber ...
Homemade 4x4 UTV build: • 4x4 Off-Road UTV Build
#donndiy #homemade #timbertrailer
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 355

@DonnDIY 2 года назад

More fabrication videos on ru-vid.comvideos

@Hellsong89 2 года назад

You might want to look into grease nipple extensions. That way it wont become one of those,"i'l do it next time i use it.. forgets whole thing exists and replaces bearing for it" things. Also you really want to design ways to have "emergency" access to those axle locking nuts for the future. Trying to drill them out so you can get bearing and axle out will be "interesting" experience for the poor bastard who has to do it.. Ether make it last so its only your children who has to do it when you are dead(and prepare some yellow rain on top of your grave), or always think ease of maintenance and if all possible, "what if this thing jams/rusts shut" moments.

@cowdogg3085 2 года назад

Maybe your next project should be a bandsaw!!

@ВладЩёгалев 2 года назад

@pkamazingskills1867 2 года назад

Can you help me plzz

@h.hasansonmez8289 2 года назад

@@Hellsong89 nnnñ

@tugkan_mertt_caliskan 2 года назад

This man is a real engineer Makes me happy to watch you ⚙️🏭

@jack002tuber 2 года назад

Same here. I don't even know what he's making and I still have to watch

@tugkan_mertt_caliskan 2 года назад

@@jack002tuber very nice my friend we are here for the same purpose :)

@ΝάσοςΓαρμπής Год назад

Μεγας Ηφαιστος και Αρχιμηδης ,χρυσα χερια αξεπεραστη αγαπη στην μηχανουργεια επιμονη και υπομονη αξιοθαυμαστα δημηουργηματα ,σας υποκλεινομαι να ειστε παντα με υγεια παιρνουμε γνωση και δυναμη απο εσας σας ευχαριστω!

@hstechnicalsolution8102 2 года назад

Helping Others In Their Tough Of Need Is The Best Gift Of Humanity So Your One Click Can Change Whole Life ♥️ ♥️ ♥️

@eqlibrium854 2 года назад

Quick Tip: put a towel or rag inside of your spare nuts and bolt bucket/box. Then put all the miscellanious nuts and bots in. When when you need to search for something, lift the towel/rag out of the bucket/box with everything inside it and lay it out on the floor. Then you can spread all nuts and bolts out on the towel/rag to search for what you need. The awesome part, after your done sifting through all the nuts and bolts, simply fold the corners of the toewl/rag together and you can lift everything up and put it all back into the bucket/box in one easy motion. 👍😁

@harryballzack 2 года назад

An addition to this tip… use multiple towels. Stack in layers. Easier to sort through.

@jlucasound 2 года назад

That's Genius! Thank You.

@connerlabs 2 года назад

Brilliant idea 😃

@Martink9191 2 года назад

When I where a kid I made same with lego. I had like 100L box, and lego brix where in full size blanket. I laied them down like in 10 second, and I i need, I get them into box in 10 seconds. Last time, it was 15 yeaars ago :D

@austinconklin08 2 года назад

Am I the only one ultra satisfied with how precise his plasma table cuts? How thin the runs between pieces are is 👌🏽👌🏽and how clean the cuts are. Almost no slag to clean up

@rypkepaulusma 2 года назад

Who doesn't have such a box or bottle (or multiple) with nuts and bolds 🙂Love your channel, your skills, and your workshop with old and new stuff all put together. And the film quality is really superb, and the fireplace topps if off!

@bl00dh4nd4 2 года назад

Donn you are my favorite heavy metal artist 😂

@DonnDIY 2 года назад

It is heavy metal indeed.👍

@paulmartin3340 2 года назад

Another excellent example of your unlimited talents on display! I hope all is well in your part of the world. Peace to all mankind. Cheers from Sydney Australia 🇭🇲👍🐨🦘👍🇭🇲🇪🇪

@thomasohanlon1060 2 года назад

Impressive work sir. Can't wait to see the working model.

@dozer1642 2 года назад

27:40 There’s something about admiring an amazing creation with the Woodstove popping in the background that is just really comforting. Nice work my friend ✌️👍🇺🇸

@johnvro967 2 года назад

Hi Donn, Having been involved in custom fabricating and design myself for almost 50 years, I can honestly say you are on another level. Take care my friend.

@danf4616 2 года назад

One word for the things you build - Sturdy! Thanks for the vids! 😎

@randytravis3998 2 года назад

it's great to have a new video too watch thankyou for taking the time to make videos for us to watch ..

@DonnDIY 2 года назад

Thanks for taking the time to watch.

@42Goopy42 2 года назад

I really like seeing your projects unfold because you plan ahead on how to maintain the project. Its an easy way to tell if the project is just for show or if it will be utilized. Can't wait to see this trailer do some work!

@ミミやん-b3r 2 года назад

この作業音で寝れるな。無駄なBGMもないし無機質な音聞けて心地よい。

@lloydprunier4415 2 года назад

Sure glad to see that someone else knows the value of saving good used fasteners!

@ncktbs 2 года назад

that little move with the socket is a move from a man who has had one too many hard to reach fittings, or knowledge from a man who built something himself and is upset he forgot that on a previous project

@hollandduck79 2 года назад

from the Netherlands thanks for the video

@DonnDIY 2 года назад

Thank you for watching!

@hollandduck79 2 года назад

@@DonnDIY you're welcome Donn

@peterp.1311 2 года назад

Danke für diesen Wertfollen Tip. Ich hatte Ihn schon ausgebaut, weil der Propeller dahinter nicht mehr lief und weil ich die Kochplatte mit Piezozündern ausrüsten will. Wollte Ihn schon neu kaufen, aber das erwies sich als Schwierig, weil der Kühlschrank einen Ausschnitt fürs Radhaus. Mit deinem Tip geht er wieder😁

@johnnyholland8765 2 года назад

And I thought I was the only person who kept a container of old bolts nuts and washers when working on projects... Waste not want not I think was the old adage. You are one heck of an engineer and fabricator. I saw this and subscribed.

@jondavidmcnabb 2 года назад

From the moment you built that awesome welding table, I have wondered when you would use those holes!!!! BRAVO!!!!!

@mlsargent51 2 года назад

Now you really have me hooked on your channel. "spare" nuts and bolt box!!! (Mine are in multiple old coffee cans) A must have!

@TheByard 2 года назад

I live in Vietnam and PTO trailers are a common site towed behind small farm tractors. For the most part the trailers are the rear ends of trucks and of course tipper trucks have the advantage of the tipping body. The trailers come with the trucks gearbox and the PTO is connected to this. Steep banks up the Highlands are no bother for these set up's and they carry huge loads of produce. All that needs to be done is weld an frame towing bracket where the engine used to be, make up the PTO shaft and braking system. I did see one double axle but not sure if it was 4x4 drive. Lots of WWII Willies jeeps towed powered trailers. Thanks for posting I love engineering videos.

@artist-161 2 года назад

Лайкос👍 Ждём продолжения 💪🤝

@markoxt6003 2 года назад

Great job Donn. 👍👍 I hope all is well in your place. Peace to all mankind. Greatings from Germany

@jordis9446 2 года назад

Some do what they can..Others do what they want .. Looks great ...

@eyefixityouification 2 года назад

Very nice work. My dad took a dishwasher rack and put all his miscellaneous nuts and bolts on the many plate and bowl dividers but still had boxes of the same tucked away. Can't wait to see it function.

@davidspilman531 2 года назад

Your a very good welder nice bead haven’t seen you for awhile so now I Subscribed so I don’t miss you great machines u build thank u for letting me sit in your garage and watch you

@kestlovs 2 года назад

Thank you, Don. It was nice to watch something else then war, for a change.

@jakobv8 2 года назад

I had to pause and leave a comment when I saw the labelling of the box. Congratulations on finally getting a sand blaster! Your arsenal of tools is getting quite impressive. Love your work, as always.

@pierremarcoux886 2 года назад

WOW!!!! built like a tank !!! Nice job, keep going i'm watching you ... Peter

@PopaAlexandru. 2 года назад

Probably comes from the former USSR ... that's how they build there.

@Ants_Pants 2 года назад

Super töö DONN! Keep up the good work. treila tuleb äge. Eesti parim youtuuber

@DonnDIY 2 года назад

Tänud, Ants. Loodame, et tuleb vähemalt praktiline. 😄

@smaggies 2 года назад

Hello Donn, great to see you again :) Nice fire I could hear in the room, set down and enjoy a drink with us, next to the Fire Pit...... take care

@williamnorth3419 2 года назад

Your work is amazing great job excited it in action

@yodasbff3395 2 года назад

Your skills are impressive, and your videos are my favorites, keep them coming 👍.

@joeapache342 2 года назад

You are genius.... thanks for sharing your knowledge and skills.

@yeagerxp 2 года назад

Excellent work 👍👍👍 . Thanks for sharing. We have something in common @ 5:45 the BOX!!!!! where everything winds up. LOL

@homemadevehicles. 2 года назад

Nice Build!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@BellozeCountry 2 года назад

I have been researching about a pto driven trailer to haul stuff up my hill and am so happy to find your channel. Excellent fabrication bro.!

@shephardscrook 2 года назад

Yes, he's back!

@DonnDIY 2 года назад

Back again

@DonnDIY 2 года назад

Donn is back

@DonnDIY 2 года назад

Tell a friend

@shephardscrook 2 года назад

Yes he's back, yes he's back, yes he's back!🤣🤣🤣

@edvardluht3422 2 года назад

Vägev ! Need taustal koldes praksuvad puud , soe vaadata . Edu !

@YamahaYZFR6RJ05 2 года назад

Coming from East Germany I have a shockingly similar box of miscellaneous screws and bolts in a marinade of dust and rust. I got it from my father and he got it from his

@ericball6894 2 года назад

Coming from Pennsylvania, USA we have a box of miscellaneous metric, and a box of sae. Lol

@YamahaYZFR6RJ05 2 года назад

@@ericball6894 it's crazy that these two systems co-exist. I'm in my 40s, started fiddling around with bicycles younger than 10, then tiny two wheeled two stroke gas to noise converters and now carpentry and my RV and I never touched an imperial wrench.

@ericball6894 2 года назад

@@YamahaYZFR6RJ05 sae is being weeded out. I don't mind metric taking over. But I'm not ready to measure with the metric system.

@ShainAndrews 2 года назад

So you are saying you come from a long linage of loose screws...

@YamahaYZFR6RJ05 2 года назад

@@ShainAndrews ba dum tsssss

@BigBlueMotors 2 года назад

My box of hardware includes bent nails that my grandfather saved for retirement when he was going to straighten them out. Unfortunately, he never got around to it and I don't have the inclination to straighten bent nails. Keep up the good work my man. 👍

@aserta 2 года назад

That's gonna be one heck of a heavy duty trailer.

@АлексД555 2 года назад

Привет,очень интересный обзор,спец👍👍

@poprawa 2 года назад

I love this kind of gloves, not too thin so protection level is fine and not too thick so precise grabbing and manipulation are possible. Also, grabbing something light weight is fine when it is boiling hot and when something is too hot they won't melt and stick to skin :>

@timbray1814 2 года назад

Isn’t this exactly what we’d all rather be doing ?

@samnitewarrior 2 года назад

I sure love that someone else has a disgusting box of random nuts and bolts that they have to sort through to find something. I have several I inherited from my grandpa.

@markkennedy4055 2 года назад

You are #1, a real Genius in my mind!

@MedidaCertaUsinagemOficial 2 года назад

Saudações Brasileira. 😊👊🏻🇧🇷

@DiHandley 2 года назад

I’m pretty sure that everyone watching this has a box of nuts, bolts and washers like that!

@PopaAlexandru. 2 года назад

Oh, no!

@connerlabs 2 года назад

Several!

@jason86768 2 года назад

Drawers full of them...

@Realtime1501 2 года назад

You have no idea, last time I weighed the bin it was 700kgs

@connerlabs 2 года назад

@@Realtime1501 The part you need is at the bottom? :)

@robertmanley7556 2 года назад

Your on your way and its looking good you are doing a fantastic job !! 👍👍

@Rottinrock 2 года назад

I have one of those bolt boxes full of good stuff

@Ryan-bo2wf 2 года назад

Those are some badass welds

@JB-ol4vz 2 года назад

Fantastic job man, you're something else. Miss you talking though, I think it was more personal wen you did so, just my taught man. Cheers from Sweden

@XEGTDodgeMagnum 2 года назад

Doing a really good job. The only thing I'm concerned with and have had cases of the bolts snapping off, is the welding of the grade bolt heads. It makes them brittle. I've had them break off once before and learned never to fully weld the heads. Grade 5 can handle welding the heads better. I would highly recommend making a retain to fit over the bolt heads to hold them from turning and falling out then weld the retainer to the plate. I know it's a lot of work to do over, but worth the time.

@nzsaltflatsracer8054 2 года назад

Yep! Welding grade 8 is asking for cracks.

@jlucasound 2 года назад

I have heard of this. Good advice. Thanks for sharing this Dodge Magnum.

@siggyincr7447 2 года назад

If I remember correctly those were grade 8.8 which is metric and similar to SAE grade 5.

@connerlabs 2 года назад

@@siggyincr7447 Indeed 8.8 is just an ordinary bolt in metric land, our high strength ones are 10.9 or 12.9

@pittwerx 2 года назад

Since he has a plasma, he could really easily cut out some bolt/nut head keepers. Weld those on then tack the bolt head in place so i doesn't come out of the keeper.

@Daxis834 2 года назад

I have a similar cold saw, but an earlier model. It forever blows fuses. Thanks for the awesome vid mate.

@lpservice2269 2 года назад

Super töö! Silm lausa puhkab sinu töid vaadates!

@aa220071 2 года назад

GREAT WORK, LOOKING FORWARD TO SEEING THE CRANE BEING MADE THANKS

@EngineeredToDesign 2 года назад

Starting to take shape Donn, the sound of your wood fire in the background is relaxing! Haha

@markguido6882 2 года назад

Love what you doing.

@olddawgdreaming5715 2 года назад

Great going Donn, looking good. Stay safe and keep up the good work. Fred.

@dobrochaneranonimous2496 2 года назад

I HAD SOME DE JA VUE! MATRIX ARE BROKEN, MY DUDES!

@richardthompson924 2 года назад

You are a true artist my friend

@darthgbc363 2 года назад

Great job actually building stuff. Location tabs are very useful, since you have a CNC Plasma. A rectangular hole in one piece & a tab in the other. The bearing flanges - I use 1/2" bolts to locate & center on 1/2" holes. Then weld 3/8" bolts in the rest of holes. I know you put the bearing blocks for the wheel axles on the inside for less holes in oil bath case. But that makes it really difficult to service those bearings. You can still turn the top drive bearing flange to the outside of case.

@homemadetools 2 года назад

Coming along nicely. We shared this video on our homemade tools forum this week 😎

@KnoX-oUt 2 года назад

Dude been watching for awhile, keep it up. Ur a genius

@pawew.4601 2 года назад

Zawsze jak coś robisz , jest to doskonałe . Pozdrawiam ! 👍😊

@melvinmariott8609 2 года назад

It is looking great buddy. It is definitely gonna be strong enough for sure.

@aaporeijonen 2 года назад

nice video

@DonnDIY 2 года назад

Thanks!

@sddiymakeitworthit7512 2 года назад

Super awesome job 👍

@eggiecortes2732 2 года назад

Excelente como siempre yessss. Mi ingeniero favorito saludos desde Puerto Rico

@robertkeime4907 2 года назад

Great video

@allenzackery1639 2 года назад

Engineering skills are great 👍

@АртемАртемьев-м9л 2 года назад

Beautiful work, very nice to look at👍👍👍

@wrightcabin4132 2 года назад

Nice job Donny👍

@cjwebb454 2 года назад

You are greatly skilled. Nice work man

@Themrjakecollins 2 года назад

Some cracking welding on this channel

@SvendsenWorks 2 года назад

Great build and video work!

@andrewwhitnet3557 2 года назад

Similar setup to scammell pioneer walking beam axle. OK until you reverse,there will be great strain on that idler.Great work .

@garyjohnson4575 2 года назад

Serious welding!

@ВикторВласенко-ь1э 2 года назад

BRAVO👏👏👏

@JulianMakes 2 года назад

Awesome progress

@beozzie690 2 года назад

Great. I like the content, and a nice amount of progress in the project... keep up the great videos

@victorriceroni8455 2 года назад

Excellent as always.

@dannywilliams4778 2 года назад

I already can't wait for the next video great job

@FFlaminscorpion 2 года назад

how does he not have 1 mil subscribers yet

@anderodriozola5710 2 года назад

20:05 the best plasma cut I have ever seen!

@fishingwithfilitsa 2 года назад

Great video, nice job👍👍👍👍

@09FLTRMM77 2 года назад

MM77 Approved 👍🏼👍🏼

@wowthingsworking7084 2 года назад

👍

@rayman954 2 года назад

i enjoy your work my friend, i hope you are far from the fighting.

@Mr.Abdulaziz394 2 года назад

Waaaw that was amazing, keep going man

@DonnDIY 2 года назад

Cheers!

@nicolaquintavalle2476 2 года назад

Great job, thanks for sharing 😁👏👏👏

@matinsakr6548 2 года назад

Super work.formidable

@mooihoor6381 2 года назад

Hi Donn, as a mechanical engineer I love your work and creativity. Maybe it was not clear to me but it looked like the bearing in the chain tensioner sprocket is not mechanical locked. Only a press fitting. In time the sprocket could slide against the bracket. If so, and if there is enough space, you can solve it by adding 3 or 4 threaded holes on the edge of the ball bearing pocket. In such a position that a round headed screw (f.i.) will lock the ball bearing.