5/8" Titanium vs 50 Cal's Best Rounds AP, Raufoss, SLAP & SLAP-T 

Hats off to Justin for taking those no break SLAP rounds like a champ.

The SLAP rounds are meant for use only in the M2 Browning Machine Gun. You need the 4ft barrel for proper acceleration, and 120lbs of mass to absorb the recoil.

Dirty guitars sound good, but let us hear the rounds slap that metal.

1) No music 2) let's see the the rifle " kick like a mule" 3) NO music

Lesson learned. Muzzle brake on a .50cal rifle chambered in .50bmg is the most critical component of the gun. At least if you don't want your shoulder bruised or dislocated.

Please, no music, just pure sounds

New drinking game every time he says titanium take a drink

Hello from Russia 🇷🇺 Привет с Зёбры!!! 🤘🏻😉👍🏻 🔥🔥🔥

Who else saw kentucky ballistics get messed up because of the slap round.

Your channel is fantastic! Doing a lot of very interesting (and expensive!) things. I really hope this channel can get huge because you really deserve it. I think it's great what you are doing.

Show the recoil man!

"Go to Edward srkissians channel" demolition ranch: am I a joke to you?

I’d like to see the recoil of those slap rounds.

Парни молодцы! Годный контент делаете! Ждем пластину 25 мм. Успехов Вам!

the thing i don't really like is music when he shooting. I want to hear blast sound from the gun and impact sound between bullet and plate. beside that, it's a cool video.

I'm really liking the direction of this channel. Decent editing, good camera shots. The music doesn't make or break the video for me. Cool new shooting ideas so far. Good stuff, guys 👍

My God I've been dying for a gun tuber to do this kind of test with these kinds of ammunition thanks for doing it😊

The round is actually not named after the town it was made in. It’s actually nomenclature given to it by the United States military, and stands for red waterfall in Norwegian! You’re welcome.

The sound is amazing. Let's hear it!!

5/8" thick... To convert just divide 5 by 8 then multiply to 25.4, you got an mm unit of 15.875 or approximately 16mm thick.

Would have been better if you had a control shot, by shooting a standard FMJ 50BMG for comparison

I am delighted, thanks for being translated on the channel Zёбра , like and comment!

Cool video! Any thoughts about putting ballistics gel behind the next plate to observe further penetration? Might help make looking for the rounds easier, too. Great work!

The fact that you didn't knock over all your spare ammo when you pulled the trigger shows how light the recoil is.

This is how you make man cave art. If you had holes cut in the corners you could hang it on the wall. Also how about engraving the type of round beneath each target, that way it becomes a record for any future owner who has not seen the video.

Great show! Привет из России!)

For everyone complaining about the music, watch the Smarter Every Day video about making sound for slow motion videos. These cameras don't record audio. It's completely made up after the fact. I would like to hear the sound of the rifle firing, though. Great video regardless! Keep it up, good!

You prob won’t see this but this vid was awesome and well done. Everyone is talking about the music, I didn’t care, all these guys have probably never heard or fired .50 cals and that’s why they don’t want the music.

You guys are absolute gentlemen. Even though we are talking about something as dangerous as firearms here, your videos are still quite soothing. Kudos.

Going Ballistic, thanks for the answer. Good to know. So far I’ve only fired ball ammo through it as its expensive enough. Thanks again.

That was AWESOME, love watching 50 cal punching holes. Subscribed 👍

Love the detailed description of the rounds👌👍

Just crazy how effective this monster brake is. Without it the rifle kicked like a mule😂😮

Where can one get a muzzle brake that allows the fire of Sabot rounds? Great video!

Look at the steel shaking like someone who is having high fever in his knees!

You need to do a slo mo on the muzzle end of that rifle with a slap round. Interesting to see when the Sabo starts to peel away from the projectile.

Why did you have to take the brake off for the SLAP around? Thinking about buying one but I don’t want to pull my brake off to use it

7:12 LMFAO 😆 Those brakes make a huge difference!

now lets see what angle is needed on that titanium plate to stop those rounds from going through.

Great content, love the channel and keep it up. Take the criticism lightly but they are right about the music. Pure sounds would be better if possible. What gun is that?

Excellent video. Great job!

Good to see y'all removed the brake for those slap rounds👍. I know it sux shooting like that but the alternative is much worse if things go catastrophic failure route. Your rode her like a champ when she bucked, nice work!

Dear Sir, I am watching your videos for long time; your all videos are informative and interesting thanks for making such videos. There is a request to you please make video in detail on all kind of 50 Cal rifles and tell that 50 BMG and 50 Cal is same rifle or there is difference between them? And also tell that which one is world best 50 Cal rifle or 50 BMG Rifle please. Thanks much Best Regards Dr, Abrar Swati

Another killer video dude. Very interested in seeing the results when you get the 1" plate.

Why no muzzle brake with the slap rounds? I’ve got a Barrett 99 and the owners manual has all kinds of warnings about not shooting it without the muzzle brake. Says it absorbs 70% of the recoil. Lot of fun to shoot though.

Cool I can t wait for the 1" titainum

all of his previous shots? dead on. shooting the slaps? “well, at least he hit it.” but serious question: why does the muzzle brake need to be taken off for that round to be shot? is it just putting out too much muzzle velocity that it’d destroy the brake.... or am I completely off?

If you still have that plate, it would be interesting to see if Ball ammo makes it through.

This channel needs sooo many more subs! But also yes, please show the recoil. Keep the music tho

how about ya bolt the plate to the stand. i like seeing the wiggle too, but i wonder if the plate flex has any affect any anything .

Well excellent work on the set up and explanation of each rounds. Can you just help me understand the difference between the Raufoss and Slap round. Does slap round also use a tungsten carbide core?

Bummer you did not back the plate with the sand bags for the Raufuss round. Would have been cool to see it spray sand everywhere!

Это очень круто и познавательно! Спасибо!

I was hoping to hear the difference between each shot. I could imagine each have drastically different chamber pressures

How have I missed this channel?🤷🏻‍♂️ Subscribed

Need more videos of shooting without muzzle brake, it's fun! And you were catching a tungsten bullet in the sand. Where is the result?

Very nice and informative, please turn up your volume

Like that you show entry and exit thats sick keep up the great videos!

Сколько Русских вам нужно в комментариях ? Going Ballistic: ДА

JEEZ,,,the vibrations and dancing that metal does!!

ummm you do know through 4 means having all 4 standing up not laying down where it would go through one or just between the bags?

Thank you buddy. Can you try 11/2 -2 " to see how it could stop the titanium or not? We really like to see which plates can stop the 50 cal.

2:45shows the round by holding it by the tip..🤨 Music was annoying too. Apart from that, I liked the host and enjoyed his personality. (Graphics were 👌 okay too) 😎 Good work!

Just curious..why the music instead of the bang of the weapon. I personally prefer to hear the BANG, but 👍👍👍

Уважение вашему Стрелку! Он Человек Железное плечо!

Hecate II is insane. Truly strong sniper. One thing i like most about it is the penetration power.

It’s a shame you didn’t show the footage of the gun going of each time. It was cut of just as he pulled the trigger. To much slow mo reminds me of the early days of Larry Vickers videos. Cool concept just need to calm down on the affects and get rid of all the terrible music.

Было мощно. Вот только звук попадания в пластину лучше бы оставили, вместо наложенной музыки.

I like that music, author, do what you want, dont listen to public who afraid of that kickass metal!

Nice channel, was just wondering how much does that plate weigh...subbed from Australia 🇦🇺

Hey bro-just here to watch commercials and support you. I hope you’re feeling better and thank you for all you do for us and others

1 inch won't be enough. Also note that your target was angled, so effective thickness was more than expected.

If you are worried about ricochet slant the plate forward at a decent angle and it will ground the rounds after they bounce back. Just use a stronger material to hold the plate in place so it doesn’t slam back far enough to project the rounds out at a bad angle.

What would be the result of a human torso being shot right in the middle with one of those 4000fps rounds? Would hydrostatic shock turn the body into pieces?

Gave ya a shout out on demolition ranch, u deserve more subscribers in my humble opinion

This is a cool channel. Glad I found it.

You should put some targets behind the plate, like balistics gel or even just watermelon or jugs.

Can you shoot it with the break? Maybe it will help, use a cheap break!

I like the music and another great video thank you

Thank you for taking the brake off and not becoming Scott from Kentucky ballistics…Scott if your here, much love bro

Приветы от Zёбры! Годный контент!

Just for info...MK = Mark. MK 2 = Mark 2. Mark generally means version.

Hey whats the point of slow-mo...if the shot just has after effect..I would say you guys should add how that hits the plate.... that's more cooler

Great video. I want to see this gun how far can shoot

Do only i think that taking muzzle off would not affect first shoot accuaricity? As the gun kicks AFTER the bullet leaves the barrel. Bullet isn't attached to the gun so tahat recoil kocks it off target ;_;. Wind and air temp does tho. I'm not taking his good aim off him...i did not hear the distance, but still solid, small target hits. Muzzle breake gekps with continues fire if you send of a follow up shoots, so that you can re-track target faster. As u fight less kick back thus less time wasted (as well as less pain). I just want to know if i'm wrong, pls correct if thats the case.

Awesome video boys! Can't wait to see the 1" plate get cratered!

Think its possible to recreate the twang of the plate from seeing it vibrate mid air. Shame you nv included that

Let us hear the gunshots sound..

Did the penetrators go through the sandbags?

RIFLE QUESTION: When people say "BMG", do all of them know what they are talking about, or do they just add that on every time it's a 50 cal rifle, no matter what kind it is? Secondly, what does BMG even mean? Is it standard for All 50's, or just certain ones?

What range were you shooting from

Very cool, but it would be awsome with some long range shots on this plate, will it go through on 500m?

For the love of God please move the target further back so it stops falling in the snow thank you I also said this on another video before I just can’t believe you guys keep doing that. But I love you guys please keep up the great videos!

It would be really cool to see a side by side comparison with steel and titanium to see how they compare in ballistic protection in regards to both thickness and weight. One would think AR500 is a little stronger when compared in thickness, but weaker when comparing weight.

Exellent Work Guys!!!, Be cool if you could catch all the cores to see how they reacted to the Titanium :-)))

Dude nice Video... but the most exciting thing in such an experiment is to hear the original sound and to see the whole footage of the shooting. This video feels like a cliffhanger

If you set the playback speed to x.25 and watch when he fires the SLAP rounds you can see the moment the scope attempts to give him a black eye.... looks like a hell of a lot of fun, great video

this channel needs more views and subs!!!!

Slap rounds look fun. And hey, if it goes wrong, you can always put a thumb in it.

You should try and get a higher quality titanium alloy this one seems kinda weak