5 Amazing Woodworking Tools Hacks | Tips & Tricks 

Very good stuff and great video. Can't wait for you to come out with more stuff I think you're my new favorite hack artist. Take care..

This is Technical Art! Creation! Very inspiring!

I like number 2. That was a good idea. Only thing I would do different, add sand paper to the bottom of the arm. That way you have extra grip instead of only force. Depending what you do with that setup, you can still have radial force overcome the downward pressure. Sand paper will give enough to hold it for sure. great videos, like always.

ingenious ideas especially the Drill stand 'Gripper arm'. The times I've had my knuckles rapped because the drill snagged in the wood. But I subscribed because you took the time to answer people's comments, a rare thing these days. Look forward to more Vids. Thanks a lot.

waw, very interesting and innovetive

Great job done! I have ever seen such great videos like this one for last two years. Now you have become the most favorite one amongst other carpenters for me. I really appreciate your job. Thanks a lot. Sharif from Pakistan.

All the five are great, simple and useful ideas . No junk ideas. Thank you so much.

I have been looking for the quick, inexpensive, and useful way to make a router table lol this is awesome. Thank you

Love these posts. The carving is so clever 👍🏻

That's some great content and production value. That kit looks great.

i love how the volume blasts when there is number of video, that dark red blood as my ears are exploding, gotta love it

this was great thank you! love those circular saw rails at 1:20. subscribed

Very cool drill press jig! Good work....thanks!

These are pure gold and I can't afford to do woodworking and it sucks. But I still love watching these.

I've seen a lot of these videos, but for me, this one is the best... Congratulations!!!

Wow! Absolutely beautiful! 💡

Finally one of these channels that aren't click bait and have interesting and functional ideas

#2 hack is so simple why I never thought of that? great!

Good job... Thanks for information...

excelente muy buenas ideas no las había visto antes . Muy buenas !!!

Muy Buen Video. *¡¡¡ BUEN TRABAJO !!!*

Many very good ideas i believe I will use at least three of them. Thank you very much 😊

Ótima dica amigo valeu obrigado por compartilhar 👏👏👏

Number 2 it’s sheet!

Muito show parabéns 👏👏👏

Wow that is very amazing thanks for sharing

Good job, great edeas Professional workshop channel Good luck

Todos os projetos ficaram muito bons, e práticos para fazer. Show

WOW WOW geniales todos!

This is brilliant stuff 👍😁

Great ideas.. Congrats!!!

That was good ...thanks!

Love your work! Nice video with some great ideas! 👏🌹🇦🇺✌️

Sir, you are fountain of great ideas!

very practical and useful.

Think this has become my favourite channel :) thanks matey

Very good job man! Thank you!

Muy buenos consejos, Felicitaciones,🇺🇾🇦🇷

Brillante. Gracias

Muy buenas ideas le felicito con que facilidad hace estos proyectos me gustan mucho

Junkyard bom dia, parabéns, belo trabalho! 👍👍👍 Eu sou do Brazil.

Amazing ideas, nice work mate 🙂

Really great ideas. keep it up.

4 super. Thank you :)

really good. some laser pointers mounted as accuracy guides would improve too

Sehr kreativ-Top ⭐⭐⭐⭐⭐👍

Happy coming New Year! I wish you happiness and all the best.

Wow. Some great ideas. Thanks!

Clever on a budget doesn't get better than that. Take no notice of the no it alls. This is perfect for the guys in there sheds

Amazing art

انت مذهل جدا وعبقري ورائع في كل فكرة من هذه الافكار اتمنى لك الصحة والتوفيق ومزيد من النجاح تحياتي لك

Good job 👍🏻

Amazing idea very good thanks you my friends

Excellent ideas. I am definitely going to do a couple of these. 🇬🇧👍

You just gained a new subscriber!

Excelente proiect! Genial! Un ano buenas! Ave!

4 I think it would be better for a wood joiner, to join wood in long sections.

Incredible. You invented a router table.

Some nice tricks there mate! Looking at your drill press it seems to suffer from runout perhaps a hack for you :) remove the chuck and clean the taper(both male and female tapers)then reseat the chuck, if its still wobbling make a witness mark with a sharpie and remove chuck again and reseat it clockwise 90° and see if it increases or decreases the wobble... if it decreases reseat it another few degree clockwise(or keep going until the wobble stops), if it increases the wobble reseating at 90° you reseat the chuck anticlockwise 90° plus a few extra degrees(or keep going until the wobble stops). A dial indicator would come in handy if you wish measure and get it absolutely spot on... but by eye you should be able get it pretty close

Excelente todo muy buena la fabricación gracias por todo

Very Good

Buena (suscrito). Saludos desde chile

Great ideas well done. I like your jig saw set up, I have something similar

Красавчик!

Oh very nice 👍🏼 look like easy make wood look good 👍🏼

super!!

useful tutorial 👍👍 my professional friend is here.

Wooou...this nice , I like this....

Браво повелителю фанеры !

saved!!! wow, I have to make these!

Outra grande idéia que esses inventores criam.

very good work bro

Bonjour, (mon anglais est défectueux) :-( Bravo pour cette vidéo, et merci! je voulais connaître la dimension (diamètre) des vis pour fixer le routeur sur la planche, merci beaucoup à l'avance et j'ai bien hâte de regarder les prochaines vidéos! Merci!

Karya yang original.. Sesuai dengan nama channelnya.. 👍

Maharashtra, India 👍 informative video 🙏

👍 всё гениальное просто! 👏

These are great dude. 11:00 you should make that jig so it can adjust up and down too so you don't have to move the workpiece 👍

This is one of these videos that shows how to make great and useful things for the home woodworkers. Very good, and of the use of material you in most cases have at home, ore not expensive if you have to buy some of the materiel.

Good ... Keep it Up..👍

Nice job

I love how hacks help create more hacks.

Awesome woodworking tools

Mind blowing

Well done, thank you.

The grinder jig is very nice, I think I might build one at work..

Thanks , your hakes is Awesome.

It's just brilliant 👍

Excellent creativity Yes, I also learnt much carpentry and woodworking from amusingwoodworking com

Not as useless as many of the "Hacks" on RU-vid and quite do-able for the home workshop!

Increíble!!! Tienes una imaginación espectacular para sacar y crear herramientas simplemente maravillosa.👍👍

Молодец!

А третий супер!Просто дёшево и сердито! Мне понравилось!

First time viewer but I will definitely be back in the future, nicely done.

Nice bhai

Top d+.

Very good idear ! Thank's

The bearing wheels at the front of the grinder sled will get in the way when the disc gets smaller. Flip them to the inside under the ply board. 👍🏻 need to add a height adjuster and it’s a winner

Все что вы показываете нет слов, большое спасибо

W O W!

Drill stand arm thing was good. I just gotta find a quicker way to adjust height.