⚡️ WATCH NEXT 🛴 Varla Eagle One full review bit.ly/36ReR8Q 🛴 Varla Eagle One rugged clamp upgrade bit.ly/3zXe8PV 🛴 6 Maintenance Tips For Your Varla (Zero10x) bit.ly/3Boeks8
Hi dude loved your gripes about the Varla egal one, I’m trying to by one from Varla but they have said they are not shipping outside the states 😢 I live in Wales, how did you buy yours?? Thanks Adam
there is a problem with my varla where there is a red exclamation point, brake lights flashing without me using the brakes, and throttle not working. I tried pumping the brakes and checking the wiring and nothing works, how can I fix this?
Yeah about that... I have a monorim suspension installed and I accidentally stripped the bolt that makes the fender stable instead of it going up/down ;/... Update I am going to get a monorim back suspension ..
Better with the fenders removed completely. Makes it easier to clean and don't go thru much water and mud anyway. Upgraded post clamp looks better turned 180 degrees as well. Functions fine and I ride full tilt.
I disagree but if you live in a dry country mostly, then no need. But for others, it’s essential. As for performance, a mudguard has nothing to do with it. That comes down to tyre pressure, hills, wind, weight, p-settings, temperature, stance and battery state.
Hi! I don’t get any wobbles myself but I think it’s definitely good to have in general. Check your tyre pressure just in case. I would definitely like the steering stiffer regardless. Stay safe man! 🤛🏻
It depends how stiff is your stearing. My came so hard that I cannot turn it with one hand in the middle. But I got used to it and ofcourse absolutely no wobble.
Got three for Christmas, two of them have a flat front tire after one use! Any recommendations on alternative tires or solutions, seems outrageous? Had checked the tire pressure was between recommended 40-50 psi as well because it was the first ride. Also one other them the brakes just straight up don't work, I'm pretty sure it needs to be bled because I see the hydrolics somewhat close, but not all the way. Some nails and parts came rusted and the screen that displays speed came with a chip in it:(... Very disappointed
Hi! The stock tyres are ok but it’s best to upgrade them. Link below. I have mine at 50psi and no issues. The surface rust you are talking about sounds like the hydraulic fluid, leaked, causing the brakes not to be effective. You should be able to replace the rusted screws easily. Or contact Varla and get them sent out. Best to bleed the brakes obviously. There is a kit you can buy for this on Amazon. Here are those tyres. Street, hybrid or full off-road. I have the street, but have not fitted them yet. Shop around for prices a.aliexpress.com/_mrxq9yU
Hello my friend... I was watching your videos and just wanted to share that the helmet you're wearing is not rated for motorized vehicles. I know this because I bought, and returned, the same helmet. Indeed, it's a great helmet because it's light and has plenty of airflow, but it clearly says it's not rated for motorized vehicles. I just wanted to share that information with you in case you weren't aware. I was able to get a very good full face motorcycle helmet for far cheaper (that helmet you have is pretty expensive!). If you want me to share the link to the helmet I got, I'll be happy to do so.... I just didn't include it now because I didn't want to come across as pushing someone's product on your channel. I hope you don't mind me sharing this with you. As a fellow rider, just wanted to look out for you, and my heart is in the right place 😊
Hi man! The Bell helmet I use has MIPS (of course) plus breakaway screws, X-Static® and XT-2® Padding,. The general use is all-Mountain, downhill, MTB and free riding. It wasn’t expensive at all. These are popular because of the good visibility and they are light. Heavier helmets I don’t like because they can restrict your movements and the visibility ain’t good. Thanks for the comment however. I’m always upgrading my gear so I’m always looking out for new products. You are more than welcome to share your link ⚡️
I have Eagle one pro Can you tell me how to lose break it’s to tight I just purchased recently I tried to follow Manual but I couldn’t figure out how to lose the breaks it’s so hard and stopped bike right away and it’s bit risky this why
Hydraulic brakes on the Pro? You’ll need to bleed them until you are happy. I’ve not made a video on this yet but click here for further help ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-knTVicVjT7k.html
Little piece of Gorilla tape will protect the cable in that spot bro :) Do the regen brakes come on only when you pull the brake or when you release throttle??? i get nothing when I release throttle only???
Hi Jersey! I’ve since used Gorilla Tape and silicone. No issues. But my front controller did blow a while back so the scooter is down at the moment (made a video on that) Either releasing of the brake/throttle activates the regen. I have mine on level 2 p-setting from what I remember.
What pressure you have in them? Make sure that there is no sharp edges on the tyre also. Most people upgrade the tyres because the stock ones ain’t the best. Click here to look at tyre options a.aliexpress.com/_EyErsaP
I just received my new Eagle One and was upset to find there is a detent in the steering that causes the front wheel to pop into a straight ahead attitude. This is very annoying when trying to navigate at slow speeds because it keeps popping into this detent. Is this a standard feature why have I not seen one person mention it in any of the dozens of videos on this scooter? Also, is there anyway to disable it?
Hi Gary. This is perfectly normal. You will not notice it after a while. It's basically to keep the steering straight. It's helpful at driving high speeds
To be honest, best to replace. It would have created a weak point and would be dangerous. You can try Aliexpress for them. Macury store is quite popular ⚡️
@@Movelectrics can you let me know how it go asap because I'm debating on varla eagle one or the new Ariel Rider Kepler I'm real conflicted on which to get I live in Florida living setup is a second floor apartment and it rain 🌧 a lot here. So I need good fenders hopefully if it get caught by rain puddle it won't destroy my unit ?
@@Movelectrics i don't understand when u mean extended with that tape ? Can you show a pic how it looks How did your controller stop working a unit failure or going overboard with the scooter...
Join my FB group and I can show you what I mean with the Gorilla Tape (linked below) Also this video explains what happened with the controller ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pT-QYTorDRM.html FB bit.ly/2NMeXIY
Have to add washers to the fender and brake cables sticking out waiting to be cut by a tree or your own fender? This thing Costs more then $2200 and these issues show me they are way overpriced $$ glad I decided against one.