5 Jigs You've NEVER Seen Using the WORLD's BEST Featherboard | Table Saw Jigs

Подписаться 625 тыс.

Просмотров 137 тыс.

50% 1

I'll show you how to make 5 awesome jigs that will help you make safer, more accurate cuts on the table saw. I'll also share some woodworking tips and tricks to help you work safer while making these jigs. Amazon and other affiliate links are used in this description and they help support this channel.
Videos To Watch Next
Jessem Stock Guides for the Table Saw - • My Favorite Table Saw ...
Safer Table Saw Sled - • How to Make a Table Sa...
Jig PLANS: www.731woodworks.com/store/ta...
Greatest Free Gift: story4.us/731Woodworks
Blog Post with pictures and info - www.731woodworks.com/731-blog...
Products In Video
Use code 731BOW10 731MAGSWITCH10 and 731MICROJIG10 to save 10% on Bow, MicroJig and MagSwitch products at TayTools.
Large Bow Featherboard - lddy.no/1cpvz
Small Bow Featherboard Single Pack - lddy.no/1cpw0
Small Bow Featherboard Double Pack - lddy.no/1cpw3
5/16" Jig Hardware Kits (knobs, etc.) lddy.no/1cpw4
1/4" Jig Hardware Kit - lddy.no/1cpxz
MagSwitch 2-Pack - lddy.no/1cpw5
MagSwitch 2-Pack with Forstner Bit - lddy.no/1cpw6
MatchFit Dovetail Clamps - lddy.no/1cpw9
MatchFit Dovetail Bit - lddy.no/1cpw8
MatchFit Hardware Kit - lddy.no/1cpw7
CA Glue I Use - amzn.to/3QojN9m
T-Track - lddy.no/1cpwj
Double Stick Tape - lddy.no/1cpwl
1 5/8" Forstner Bit (for MagSwitch Holes) amzn.to/3RvZTL2
Other Tools Used in this Video
Combination Square - amzn.to/3D4EjsJ
Small Tri-Square - amzn.to/3CZ4Zv4
My Favorite Tape Measure EVER - lddy.no/1cpwh
Tri-Pod for my iPhone - amzn.to/3TN5zC7
Shirt I Was Wearing - www.shieldsofstrength.com/1-c...
Follow me on Amazon for more tool reviews: www.amazon.com/shop/influencer-4e5e1fdd
Join our Patreon supporters to get access to exclusive member-only livestreams, behind the scenes videos, store discounts, and other awesome perks: / 731woodworks
I get my stickers from Sticker Mule: www.stickermule.com/unlock?re...
#731woodworks #woodworkingtips #woodworkingtools
0:00 Table Saw Tips and Tricks
0:20 Bow Featherboad
1:59 Woodworking Tip on Drilling Holes
3:06 Dovetail Routing Tips and Tricks
4:06 1st Table Saw Jig
5:36 2nd Table Saw Jig
6:50 Routing Slotted Holes Power Tip
9:16 Assembly and Use of Table Saw Jig 2
10:30 3rd Table Saw Jig
11:42 4th Table Saw Jig
13:48 5th Table Saw Jig
14:00 Routing Slots in Thin Boards
16:00 Coolest Table Saw Jig I've Ever Made
17:05 Assembly and Use of 5th Jig
17:50 Preventing Kickback on a Table Saw
18:09 Discounts on Products Used

Хобби

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 204

@731Woodworks Год назад

▼EXPAND FOR LINKS TO THE TOOLS▼ A Safer Table Saw Sled► ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YbMUc4wVjpE.html Tools In This Video: 5 Jig Plan Bundle - www.731woodworks.com/store/tablesawjigs Large Bow Featherboard - lddy.no/1cpvz Small Bow Featherboard Single Pack - lddy.no/1cpw0 Small Bow Featherboard Double Pack - lddy.no/1cpw3 5/16" Jig Hardware Kits (knobs, etc.) lddy.no/1cpw4 1/4" Jig Hardware Kit - lddy.no/1cpxz MagSwitch 2-Pack - lddy.no/1cpw5 MagSwitch 2-Pack with Forstner Bit - lddy.no/1cpw6 MatchFit Dovetail Clamps - lddy.no/1cpw9 MatchFit Dovetail Bit - lddy.no/1cpw8 MatchFit Hardware Kit - lddy.no/1cpw7 CA Glue I Use - amzn.to/3QojN9m T-Track - lddy.no/1cpwj Double Stick Tape - lddy.no/1cpwl Other Tools Used in this Video Combination Square - amzn.to/3D4EjsJ Small Tri-Square - amzn.to/3CZ4Zv4 My Favorite Tape Measure EVER - lddy.no/1cpwh Tri-Pod for my iPhone - amzn.to/3TN5zC7 (If you use one of these Amazon and other affiliate links, we may receive a small commission) Some other useful links: -Daily Tool Deals on my website: www.731woodworks.com/tool-deals -Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter -Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter: www.731woodworks.com/store/boardbutter

@dtr2058 Год назад

Just wanted to give you a powertip! When drilling a hole with a forstner bit, start the drill in reverse, then switch to normal. This will give a cleaner hole with less tare out.

@diy-mitri9737 Год назад

You just changed my life

@davidmckie2724 Месяц назад

Thank you for all the tips. I’m new to woodworking, and using table saws, your channel has given me a lot of safety tips Question, the last jig with the two brackets, do you think it would be safe to build that with only one bracket for use to with two of bow contractor saw feather boards?

@codacreator6162 Год назад

Watching 731 Woodworks videos always inspires me to get building. It’s like watching those music videos that make you want to play guitar… awesome!

@chapbix12158 9 дней назад

Very helpful video!

@wittworks Год назад

Brilliant! Great idea Mike. Great execution Matt. M & M! Now I need three of these…

@codacreator6162 Год назад

Solid instruction and great advice, as always. Thanks, Matt!

@WilfredEllerbeck 2 месяца назад

Always informative and straight up. Thank you.

@wittworks Год назад

I like jig #4 best for adjustability and that it doesn't mess up your fence reading

@jimbryant2157 Год назад

Great tip on routing the channels in small parts - definitely a game changer for me. I picked up a set of these featherboards during my last trip to Rockler and was impressed during my first usage. These jigs will make them even more useful - thanks!

@alberttreado3713 Год назад

Still here! Love the video!

@philmininni5981 Год назад

I am running out of room, with all the jigs I have made for my projects. I am real interested in these jigs you have shown. Taylor tools should sponsor you. This showed off their products in a very positive way. Good job!

@themightywarforge7586 Год назад

I have that smaller feather board and I love. It is the only thing that fits properly on my Dewalt jobsite saw.

@LifeAdventurer1 8 месяцев назад

"Worsher" 😆 Love this video...Thanks!

@chuckgrumble5440 4 месяца назад

Neat ideas. I have not seen it before I bought the clear cut jessems, but I would still get the jessem and call it a day.

@tmn67 Год назад

so Awesome, thank you!!

@davidcarvalho9904 4 месяца назад

here.... tyvm for the videos ride safe and have fun

@kevinr1704 Год назад

Here! Thanks for another great video!👍👍

@OCD4COD 5 месяцев назад

Here! Thanks for the content!

@paulellis84 Год назад

Here. Love the info Matt!

@davidcorliss Год назад

here love the jigs

@yellowhammerwoodcrafts Год назад

Here! Pretty cool product!

@88rushrocks Год назад

Cool and love the shirt

@num9899 Год назад

Thanks helps a lot

@dentonjordan6992 Год назад

Nice! 👊🏻👊🏻

@gumbyboy15 Год назад

Good stuff.

@greghowdeshell Год назад

HERE! I like the bow featherboard concept. I was looking for a good way to hold my pieces and help against kickback and these fit the bill. And Taylor tools is not too far from KC for me.

@byfordbarnard2264 Год назад

Yep still here, I’ve got to do some or all of these jigs

@jeffreyfroehle6414 Год назад

Good project

@Gsijin42 Год назад

Here - really great video. Enjoy all of your stuff.

@731Woodworks Год назад

Much appreciated!

@MattsTAW Год назад

Those are pretty awesome, the last one especially. I have been looking at those Bow featherboards and now have an even better reason to get a couple. Thanks for the great content, Matt.

@riversider681 Год назад

Still here at 16:30 stayin' til the end. cool jigs.

@731Woodworks Год назад

Thanks!

@kerapp Год назад

Love the shirt! Not ashamed Bro!

@Yosser70 Год назад

That last one should be a product! Looks like it’d improve cuts but safety too.

@CarmoniusFinsnickeri Год назад

It already is, Magswitch have an almost identical one.

@mwpalabama4974 Год назад

Here. Good ideas.

@mishellekochel4510 Год назад

Helpful vid PLUS POWER TIP, does it get any better??!!

@johnshirley6988 Год назад

I watched the whole video, and really liked how the jigs came together and how adjustable they were. Thanks Again for a Fine demo of how to make these, and for all you and mrs 731 do on this channel.

@731Woodworks Год назад

Thank you John

@kenerickson4923 Год назад

Love Taylor Tools

@robohippy 8 дней назад

Well, the miter slot type jigs do work, but I never liked them. I am sure they have been new and improved since I tried them years ago. I found the mag switches to be far simpler to set up and use.

@patrickbink4617 Год назад

Really liked that last jig, but all of them looked useful and easy to make. Thanks!

@markpuente5569 Год назад

Hi Matt, Great “How To” instruction video! Tay Tools is such a great value for Woodworkers. The quality of the T.T. green feather board is heads and tails above other brands. I’m a fan of Tay Tools products. Looks like I am going shopping. Thanks!

@731Woodworks Год назад

Totally agree!

@MCarberry89 Год назад

HERE! I enjoyed the video

@Shamustodd1 Год назад

I love my Bow feather board and while I have an ancient Rockwell Delta 9" table saw with the original fence there are still a lot of usable ideas here especially that last jig. Thanks for the video!

@LYTOMIZE_Woodshop Год назад

HERE A long video! Love it! It'll be interesting to see this video ranks as the subject material should play well, but from what you've said in the past how many will watch? I hope this is a home run - I'll be looking to get tbe plans in a month or two!

@rockspringswoodturner4502 Год назад

Great information and love the tee shirt and hunting sign in the background. Blessings

@sinsofvorador Год назад

This is why I love my jessem clear cut set up. Adds a lot of safety to you cutting

@jimacker9074 7 месяцев назад

As for your last jig. I was fortunate to find that at our woodworking store before it went out of business. 😢

@jamesraymer2356 Год назад

Present & Accounted For! haha

@michiganracer1181 Год назад

Love the bow feather boards, thanks for sharing a couple new ideas on how to use them.

@donwilliams3626 Год назад

This video has some of the best table saw jigs. They are simple and address many different everyday examples of how to make repeatable cuts even safer. This last one is the premier of all for me. It will be the next jig for my shop. Thanks for sharing.

@Damon_Barber Год назад

Let’s get JIGgy with it!!

@pirakoXX Год назад

5:00 If you screw in the knobs from the backside, they are not interfering with the push stick. (Evt. place a counter sink carriage bolt head on the front side, if you make a fence jig and don't have the "slide in" clamp)

@hansangb Год назад

Still HERE. And @18:15 I always wanted to test human vs tablesaw strength. The force of the spinning blade is substantial and I've often wondered how a jig like this would stand up to it. I know the primary purpose is to get accurate cuts and slow down kick backs. But I've wondered how much it would slow down or prevent kickback on an actual saw.

@davidcrocombe1322 7 месяцев назад

I don’t recall seeing / hearing what the 2 holes in the square router push block are for. Please enlighten me.

@ogsan1296 Год назад

Awesome video Matt as always. I love your channel. Always on time, thank you Sir.

@darthspiderman1 Год назад

HERE Great set of Jigs to use on the tablesaw.

@tonytully4943 Год назад

Totally worth watching the whole video

@andersonolive4553 Год назад

This feather boards been on my radar for a while, definitely need one now! Great vid Matt! You’re killing it dude, so happy for you seeing your channels growth! You deserve it.

@731Woodworks Год назад

Thank you

@michaelc.fischer2439 Год назад

Watched the whole thing! You know how to keep my interest. Good job!

@lauramarshall6376 Год назад

Once again ... a fabulous video with SOOOOOOO many new ideas for me. Thank you.

@raymondhall7606 Год назад

Here, and Love that you're sharing this info to us. Thanks

@13daniel1974 Год назад

Love the review. Love the sign in the back, too. Thanks for your channel.

@rwbuchwald Год назад

Those are some great jigs. I really like those feather boards. Will look into purchasing thanks

@Mortow8 Год назад

Here and thank you for the instructional video.

@ryanhirschey Год назад

Great ideas for featherboard jigs. I use the MatchFit system for lots of clamping and the Gripper for a lot of table saw and router work, and feather boards on the router. I’ll make these jigs for the table saw!

@charleswv Год назад

Here still! Love your videos - wish I could come and learn directly from you. God bless you!

@keving8682 Год назад

I think you are spying on me! I was researching the Bow Products feather boards last night and bought two today and then see this in my feed!

@adamc3474 Год назад

Here Awesome video. A tool review that not only showcases the tool but also several ways to use it and how build it at the same time. I would like to do the same thing for my router table. Stay awesome.

@Cnthib57 Год назад

(here) some good ideas..

@ronswoodshack Год назад

Really cool jigs Mighty Matt!

@goodscustomfurniture Год назад

Awesome Matt! Just Awesome! 😀

@lelandmyers4618 Год назад

Nice video with a lot of info, what do you use for drawing your plans ?

@Ridmanjr Год назад

Here of course

@larrynelson734 Год назад

Great video. Love that jig .

@mishellekochel4510 Год назад

Haha...still here!!! I can see why it is your favorite.

@mikec2810 Год назад

Very cool Matt! The last jig is my favorite also!

@heatseeker420 Год назад

Yup

@onef4c3dgemini91 Год назад

Here!!! Your videos are amazing. Keep doing what you’re doing and motivating me and others.

@Rodbuilder109 Год назад

Here Mr. outlaw

@HonedByJones Год назад

Will be ordering a featherboard soon. Thank you.

@g.efaber482 Год назад

Here! I just spent $300 with Tay Tools. Wish I had know about these beforehand, because I would've ordered them at the same time! Thank you for another great instructional video and thanks to Mike Taylor for being a friend to the WW community.

@donaldmorrison6898 Год назад

Here!! Thank for the info. will come in useful!!

@mishellekochel4510 Год назад

Ran across these at IWF, one of my favorite finds!!

@CyberBobCity Год назад

Here. I’d love to see how these compare to the Jessem stock guides

@731Woodworks Год назад

Really the main difference would be the stock guides "pull" the stock toward the fence while a weatherboard pushes it toward the fence. This is a much less expensive option, especially if you already have some of the hardware like match fit or mag switches.

@CyberBobCity Год назад

@@731Woodworks I don't currently have any match fit or mag switches. Curious which setup would be more useful. Thoughts?

@731Woodworks Год назад

@@CyberBobCity The MagSwitches you can use in several jigs (even with the Jessem). I think the Bow featherboards are better for anti-kickback. I like the Jessem guides for sheet goods to help hold them to the table and pull toward the fence.

@chrisp.76 Год назад

It’s ok to use the magnets on the Sawstop? Does the brake have to be shut off?

@731Woodworks Год назад

Yes magnets on the table doesn't do anything to the brake.

@lincolndickerson1293 Год назад

Here … thanks for showing the slot cuts on the router table

@darodes Год назад

I’m in here!!!!

@baddog4347 Год назад

Thanks for the video, can you tell me where you got the hunting poster on your garage door?

@731Woodworks Год назад

Got it here fewwillhunt.com

@koccocarrasco5696 Год назад

💯👍🏻👍🏻👍🏻

@gregbon1897 Год назад

I find myself learning lots of things from you. One of my favorite is how to speak southern. (Wallgo)

@eddiegiovanniello4346 Год назад

Here Buddy

@BillCoale Год назад

You should add a merch item (T-shirt? Poster?) with a list of Outlaw-approved southern terminology (waller and walago are my favorites, they remind me of home)

@p24t Год назад

CA glue.. liquid clamping! I can use this 'here' first style on my contractor saw, way cheaper than the Jessem rollers. Also.. that router pushblock... so great.

@chrisp.76 Год назад

Here. Helpful jigs!

@steveiv9250 Год назад

AlthoughI don’t have the table saw feather boards made by Bow, I do have their guide for my bandsaw including the extension, and it’s is awesome. ( I use the hedge hogs feather board for my table saw, also awesome )