The other thing I would consider is NOT to buy an integrated unit but one that offers a replaceable lamp (bulb). LEDs don't last as long as advertised and in three years you won't be able to find a matching integrated unit. Dimmability is also important. How well will the LED's dim? I've seen one too many multi million dollar homes here in Las Vegas with HORRID stick-on recessed fixtures.
I could go on and on about doing recessed light troughs in the ceiling that gets the fixture and light source out of the line of sight and to illuminate what needs to be illuminated. I've got six recessed track systems in my house and when needed can get a ladder out and replace the lamp (bulb) or aim the light in another direction should that be necessary. We need to start a petition to inform the public on the excess use of surface mount "recessed" lights and outlaw boob lights. Hire a lighting designer at the outset of a project rather than an after thought. @@lizbiancoismydesignsherpa
Great video. Lighting was the most exasperating part of my new construction. High sloped ceiling and artist studio. Couldn’t find anyone to help. Went with 6” recessed with 75 lights dimmable.
Our spec sheets with dimmer recommendations are available on our website... our Koto Architectural line will have the dimmer lists with the housings instead of the light modules, since the driver for the Architectural line is on the housing. Otherwise, check the "standard" Koto light module pages. The Dimmer Lists will be under the "Resources and Downloads" part of the product page. There are LOTS of compatible dimmers for Koto!
Ugh. I have a 2100SF 1971 ranch in SW Florida. I had drop ceilings in the bathrooms and kitchen. I removed the grids and panels. Just wired up a few of those wafer LEDs from Home Depot. No lie, the old fluorescent bulbs (one is 8’ long) put out better light. It’s easier to see and doesn’t create the weird glare that the LEDs put out. Now, I’m thinking about the fact that they’ll probably only last a year or two...like everything else nowadays. Tempted to DIY light covers or go with an industrial look. Lol.
Hi Liz, you've got great info and great presentation. I have a basement bedroom. It's 17.5' x 13.5'. One wall is about 20" longer than its opposite wall. Should I plan my lights with the longer or shorter dimension? Thanks a bunch, and I'll see if I can find an answer in your other videos as well.
Absolutely could be. I’ve specified $600 a piece for high hats 💰 for clients in the past. And that doesn’t include installation! But, there are many good alternatives under $100
Luckily they sell these "canless" LED recessed downlights that seem to eliminate the extra cost for the can itself, but my question is.... Is it okay to go from "warm" to "cool" Kelvins room by room or in areas that are "open" but separate? Let's say like having the kitchen be a little cooler and the adjoining living room a little warmer, or does this just make the place look like a tacky circus??🤔
🎪You can get away with about a 500 kelvin difference, depending on floor, wall cabinet color etc. But any more than that, and it becomes mismatched🤡 Change/lower the lumens output, so a 9 watt vs 13 will feel cozier. And always dimmers! As far as the canless, beware of the wafers!
@@Smellslikegelfling I wish that was true. I've had 15 LED can light replacements last between 9-15 months. I've gone back to incandescents that typically last 15-24 months.