5 TIPS To Make Your FPV Drone More DURABLE 

Tip 1 - build and hang on the wall 😎

I uses hockey stick tape to protect my wires on the arms, its really abrasion resistant and light weight, plus comes in bright colors, a roll last me a long time, i use 2 layers and put a drop of super glue at the end to prevent it from unraveling, ive never chopped up my wires since...

Tip nr 4 - just use racewire it also helps if you need to replace a motor

I don't run an action cam, but I do like the idea of a battery protecting TPU skeleton bolted down in the front and extending over the battery... Time to bust out CAD.

Never would have thought of using a go pro mount with no go pro , thanks letsflyrc I always love your content

There's diamond braid rope that i take the core out of and slide over my motor wires then use a zip-tie to secure them to the arm. I've never had one fail me and have been doing it that way for over 2 years. Also, I noticed the capacitor on your drone is hanging out the side by the props just asking to be knocked off. One trick that I've learned to combat that is to use some small wire extensions solder to the leads of your cap so you can place it in a more protected spot and the flexible wire also helps protect the leads from snapping. In frames with enough room for the cap to be placed standing parallel next to a standoff i will use a zip-tie to secure it around the cap and standoff which seems to provide the best results. Last thing, secure the battery lead at least 2 spots on the frame with zip ties, it will save your fc pads from being lifted and your wires from getting chopped.

What is the weight of this build with all that protection?

Props out - single-handedly the best crash-recovery move I’ve made.

Dude you are awesome! Thanks for the tips.

Fire video boys!

do you have a design for a fullsize gopro, like a 9? I like the idea of maximum protection

A Walksnail system in a Rotor Riot video? Nice.

Where can we get some of the 3D files that you use?

if you mute this it looks like youre trying to rap.

wherecan get the 3D products, i have your tanq frame, building it no. Good video, being a newbie, durability i important, thus i got your tanq.

Zip tie the power wires to the frame, so in a crash the wires and their pads are not stripped from the esc

thanks

nice

Get a tripod. 🤙

Front bumper !

That thumbnail, tho. 😂

Спасибо бро 👍👍👍👍❤

1st! Boom.

is it me, or is the audio enhanced with ai?

First

6. 3D print some TPU props :) I did once and I still can't believe they worked first time. See 52:42 mark in "DJI drone gets FCC hack. FrSky promises HD FPV system? (FPV News with JB and @ItsBlunty)"