5 WAYS TO TRANSFER IMAGES TO WOOD / WHAT WORKS BEST??

Подписаться 339 тыс.

Просмотров 36 тыс.

50% 1

Do you want to learn 5 ways to transfer images graphics or photos to wood?
▶️ Visit my store: www.etsy.com/ca/shop/OurUpcyc...
▶️ Shop my Amazon store for all my favourite craft supplies: www.amazon.com/shop/upcycledt...
Hello everyone!
Welcome and in this video I will show you 5 different ways to transfer images graphics or photos to wood. This will work with graphics or photos with a laser jet printer and some will work with a ink jet printer. . I will do a comparison at the end of the video so you can compare and see the difference between each image transfer method.
Chalk paint recipe: • Easy DIY Chalk Paint i...
If you love my videos please SUBSCRIBE and don't forget to press the bell, 🔔 like, comment and share. Stay safe and Love all. 😍😘 Deidre
▶️ Please Subscribe: / ourupcycledlife
------------------
▶️ Visit my store: www.etsy.com/ca/shop/OurUpcyc...
▶️ Support my channel: www.buymeacoffee.com/Deidre
▶️ Subscribe to my email list for more crafting and DIY content! eepurl.com/hLQBjf
------------------
▶️ Follow Me on:
• Instagram: / our_upcycled_life
• Facebook: / deidrewoodgourlay
• Pinterest: www.pinterest.ca/deidregourlay/
• TikTok: / our_upcycled_. .
------------------
▶️ My other videos:
: INK JET PHOTO TRANSFER: • 🖨️✨ INKJET PHOTO TRANS...
• INK JET TRANSFER: • How to Photo Transfer ...
• MY FAVOURITE DUMP FINDS: • 7 FAVOURITE UPCYCLED D...
• DIY WOODEN SIGNS: • Easy DIY Farmhouse Woo...
#trashtotreasure #phototransfer #OurUpcycledLife #diycrafts #diy

Хобби

Опубликовано:

12 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@OurUpcycledLife 2 года назад

Subscribe to my email list for more crafting, DIY content and get free graphics! view.flodesk.com/pages/632e2d2fd960dab4eb97c358

@sandmantravel2196 Год назад

Do you have any techniques to transfer to tiles, like ceramic ones?

@candacejansen247 Год назад

By far. You are my favorite mod podge crafter. Very detailed and descriptive. Extremely helpful! ❤

@OurUpcycledLife Год назад

Glad you are enjoying

@franstoeckel1615 2 года назад

Thank you for the great teaching and tutorial. Always so thorough and great job showing how it is done. ❤💞💕

@OurUpcycledLife 2 года назад

Thanks so much Fran 😊

@patricaorlando7716 2 года назад

First I must compliment you recycling and repurposing. You have given me so many easy idea’s and formats . I just started a new project. My aunt/godmother had kept handkerchiefs,doilies and table runners that were my maternal grandmother’s . I am cutting them up and using my aunt’s picture frames that she insisted that I take when they were selling the family homestead. Using mod podge I am able to gift all 8 of her grandchildren with something that was hers and repurpose the frames. Thank you for the making all your videos so easy to follow 💕

@OurUpcycledLife 2 года назад

Oh what a beautiful thoughtful gift!! I think it is such a fantastic idea! Thanks for following along Patrica

@vickiallred977 2 года назад

Thank you, can't wait to try this!

@OurUpcycledLife 2 года назад

Thanks for watching Vicki

@reneehouse-wyatt3658 Год назад

I'm still working through your older videos. However, I found this one very informative. I even bought an inexpensive laser jet to do transfers and several of your printouts from Etsy. Very pleased with the mod podge paper transfers! 🤗😍😃

@OurUpcycledLife Год назад

Glad it was helpful!

@christinacarver6301 2 года назад

Thank you!!! Great tutorial.

@OurUpcycledLife 2 года назад

Thanks for watching Christina

@SimmonsFam-OR 2 года назад

You always teach us so many extremely useful techniques!

@OurUpcycledLife 2 года назад

Glad you think so! Thanks for watching

@alisoneisinger8607 2 года назад

Thank you for making your videos so easy to follow and well detailed. After watching one of your videos I always feel like I am able to do it too!

@OurUpcycledLife 2 года назад

That's great!! Glad my videos are helpful. Thanks for watching Alison

@kerrygould6676 2 года назад

Thanks for putting all of these methods in one video. Great to see the comparisons I vote Modpodge all the way, seems a lot crisper

@OurUpcycledLife 2 года назад

Glad it was helpful! My favourite also!

@sharonjansky3877 2 года назад

Thanks for the review. I really like this compilation video style.

@OurUpcycledLife 2 года назад

Glad you liked it! Thanks for watching Sharon

@nancysnell7428 2 года назад

Great tutorial. Thank you

@OurUpcycledLife 2 года назад

thanks for watching Nancy

@hansdegroot8549 2 года назад

Very interesting comparison of techniques. Thanks for sharing. When I bought some of your labels in autumn last year, I tried out some techniques, but only on sanded wood and on wood painted with some undefined paint (meant to be a toning paint for in latex or acrylic wall paint) I wasn't satisfied with the results. Rubbing of the paper needs a lot of practice it seems at the mod podge or acrylic method. That time I didn't have the right ingredients to make my own chalk paint. Now I have. So I should give it another try. I don't have much free time these days. I noticed that you already have more than 50K subscribers. My congratulations. 100K till the end of summer? You deserve them for sure.

@OurUpcycledLife 2 года назад

Yes that technique works the best on chalk paint I find and lots of practise. I am so excited 50,000!! Its incredible

@yvencia1150 2 года назад

Great video and thank you for sharing 😀

@OurUpcycledLife 2 года назад

You are so welcome! Thanks for watching

@zummatwo 2 года назад

Great techniques. Thanks for the lessons,

@OurUpcycledLife 2 года назад

My pleasure! Thanks for watching Paula

@ginamoody5105 8 месяцев назад

Great information thank you for sharing!

@OurUpcycledLife 8 месяцев назад

Glad it was helpful!

@linbron2018 2 года назад

Reverse test got it, thanks for sharing . I’ll have to try the poly

@OurUpcycledLife 2 года назад

Thanks for watching!

@pam2245 Год назад

Thank you, most helpful 🇦🇺

@OurUpcycledLife Год назад

Glad it was helpful!

@trinascaman2315 2 года назад

I agree the first one plus its nice and easy.

@OurUpcycledLife 2 года назад

So easy! Thanks for watching Trina

@brendaholmes72 2 года назад

thanks for info...

@OurUpcycledLife 2 года назад

Thanks for watching Brenda

@MustangSally7259 2 года назад

❤❤👍 I like the mod podge on paper the best. I have a laser jet.

@OurUpcycledLife 2 года назад

Me too!! Thanks for watching

@ZombieQueen819 2 года назад

Thank you thank you

@OurUpcycledLife 2 года назад

Thanks for watching

@markburke6365 Год назад

I use Mod Podge ink jet image transfer to wood, it's great.

@nanettehuse8213 2 года назад

Awesome 😊

@OurUpcycledLife 2 года назад

thanks for watching Nanette!

@maryiles6836 2 года назад

Do you have to reverse image! Thank you for all the inspiration!

@OurUpcycledLife 2 года назад

You do if doing a transfer of the words if not it will be backwards ❤️

@conniepoe1793 2 года назад

Thank you for all the information! I have been trying to find a printer so, I can create some signs. I didn't know if you could tell me what printer you have. 🤔 I always enjoy your flips!

@OurUpcycledLife 2 года назад

I have a Brother laser printer. All will work great :)

@conniepoe1793 2 года назад

@@OurUpcycledLife Thank you, for the printer info.!

@treasureslayer3049 2 года назад

Do you seal your signs when you finish? Great video

@OurUpcycledLife 2 года назад

Yes I do! I use poly acrylic sealer water based. Thanks for watching

@CoffeeTeaAndPotpourri 2 года назад

Thanks. I greatly appreciate your videos. Quick question. Have you tried printing directly on parchment paper? And using an old iron with no holes? The holes in the iron very the heat distribution a little bit.

@OurUpcycledLife 2 года назад

I have not had good success with parchment paper. The only iron I have has holes and I don't use this technique enough to warrant buying a better iron. Thanks for watching :)

@theysayvideos5844 9 месяцев назад

I spent several years as a Laser printer repair person and would advise not using label or wax paper in your printer. Note that a Laser printer reaches temps well above that of the melting point of the wax or label paper coating. Sure you may get away with it as it does not spend too much time under the heat element. However, you could end up with accumulation issues and/or if a jam occurs the paper will sit under the hot element long enough to become an issue. Not worth it if you value your printer. There is a laser printer transfer paper out there on YT.

@abjealva 11 месяцев назад

You are very creative!!!!! Are you using regular print paper or special paper?

@OurUpcycledLife 11 месяцев назад

Regular paper

@abjealva 11 месяцев назад

@@OurUpcycledLife Thank you

@sharonfox9670 2 года назад

Hello. I love your videos, you do such a great job. I have a question. I tried the reverse transfer method on an old stool that I chalk painted teal. I left the transfer overnight and removed it the next morning. The paper cam.off easily however the glue still shows, mostly and outline of the page. What have I done wrong? Thank you.

@OurUpcycledLife 2 года назад

It can be tricky doing it on colored paint as Mod Podge doesn't completely dry transparent. If you are seeing lots you probably put on too much mod podge. You just need a very light coat. You can also go back over the outline with the blue color to blend more. Hope that helps

@sharonfox9670 2 года назад

@@OurUpcycledLife Thank you. I will try that.

@vanessafarias3244 Год назад

You can put mod podge on wood let dry put paper copy quote down and iron

@OurUpcycledLife Год назад

Sure can

@cm9yso 10 месяцев назад

I have an idea for making a 4 inch wood disc for an event I'm hosting and I was thinking this is a great why to print on the wood. Question - Do you have to paint the wood first? Can you use the Mod Podge on the finished project to seal the wood?

@OurUpcycledLife 10 месяцев назад

I find it works best with a painted surface and then you can feel it up with a polly sealer

@bonniejones8891 2 года назад

Could you use freezer paper instead of the label paper?

@OurUpcycledLife 2 года назад

It might work but I find it isn't shiny enough and usually doesn't work that well. Thanks for watching Bonnie

@mindyloper4454 2 года назад

So do you think the shiny paper left from like cricut vinyl is same thing??? Bc dollar tree sells permanent vinyl I think what 12inx48in?!? and the paper is so shiny behind the vinyl.

@OurUpcycledLife 2 года назад

I bet it would work!! Give it a try nd let me now how it goes !

@lisak9001 Год назад

Hi, I'm buying some t shirt transfers from Ali express because I don't have access to a computer, can these transfers be ironed on other surfaces.

@kfields4 Год назад

Can you tell me some good laser printers that will work for this. (I’d like a color one, to be able to do color prints too.)

@OurUpcycledLife Год назад

amzn.to/3C80iNU

@jeanastowell4635 Год назад

Question- what program are you using to reverse lettering for you methods of reverse mod jog

@OurUpcycledLife Год назад

How to Mirror / Flip / Rotate Image in Google Docs / Graphic Photo Transfer DIY ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W-8rp2UjwS8.html

@jameskid81 Месяц назад

what settings do you have it on for printing onto the shiny label paper, mine come out all faded, thank you.

@OurUpcycledLife Месяц назад

Every printer will be different. I didn’t have to adjust mine

@ILoveMaltese 2 года назад

What computer program do you use to design your text?

@OurUpcycledLife 2 года назад

Canva has a really great free program to make graphics

@8lifegr892 Год назад

What if we don’t have the satin??

@adelepears899 Год назад

would the iron method work on fabric?

@OurUpcycledLife Год назад

Yes it would but it is not washable thanks for watching

@americanmiss1976 Год назад

Hello tried the transfer method with mod podge. It worked great. Except some of my letters and roses rubbed off. What can I do to prevent this next time?

@OurUpcycledLife Год назад

This technique is never perfect and there’s always going to be a little bit centre going to rub off. It’s also gonna make a difference if you’re using an inkjet printer as it doesn’t work as well.

@pfiltz Год назад

Well, I have yet to get this to work 9:46. I think I may have to let that paper soak a bit more. I'm new to transfers, so we'll see ;) I might be a bit too aggressive in pressure. I'm going to let a wet sponge sit on top of it for 15 minutes to see if I can get that paper to easily come off.

@OurUpcycledLife Год назад

If you wet too much the graphic will lift off only wet till you see graphics and work in small sections

@pfiltz Год назад

@@OurUpcycledLife Thanks... I'll try one more time... :)

@just4craftsngiggles454 2 года назад

I’m curious would wax paper work the same as the CD label technique ?

@OurUpcycledLife 2 года назад

No i find it doesn't! Thanks for watching

@just4craftsngiggles454 2 года назад

@@OurUpcycledLife you’re welcome and thank you so much for answering

@brendacooper7944 Год назад

Maybe the iron on would work better if the parchment paper wasn't doubled.

@staceyfolmar1594 2 года назад

I have watched many of the videos of you decoupaging and I felt like it should be fairly simple, however, I can't master it or even come close. Please help! Lol I'm using a bare piece of wood from the craft store to make a sign. I have lightly sanded, wiped and then painted with chalk paint. I put a light coat of the mod podge on the paper then transferred it to the board. I let it sit over night and then tried to take it off the way I see you do it but the words come with it. Any suggestions? Also the mod podge is probably a few years old. Does that matter? It looks fine so I used it. Thanks for any help 😀

@OurUpcycledLife 2 года назад

Are you using a ink jet or laser jet?

@staceyfolmar1594 2 года назад

@@OurUpcycledLife it's an hp ink jet

@OurUpcycledLife 2 года назад

Some ink jets can be very tricky! Do in small sections and don’t soak just dampen the paper .

@staceyfolmar1594 2 года назад

@@OurUpcycledLife I have another one to try today so I'll give it another go. Thank you!

@TheJoogsie 3 месяца назад

Does it have to be on chalk paint?

@OurUpcycledLife 3 месяца назад

I find using chalk paint gives you the best transfer

@pinkimposter4407 Год назад

I have tried a few but it seems like I always have paper left on, you can still see the paper even after I seal it. If I go too hard the graphic comes off.. What am I doing wrong?

@OurUpcycledLife Год назад

Are you using an inkjet or laser jet if you’re using an inkjet it can be a little bit tricky just work in small sections using a little bit of water not very much this video will help you out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bGaioUJg-nc.html

@kidrockn4vr Год назад

I watched a lot of your transfer and reverse graphics. I haven’t seen a video on how you measure the wood and graphics. Do you have one I’m not seeing? If not can you make one. Thank you. Love your videos