52. How to Make Pottery Ash Glazes from Pitfire Ashes

Подписаться 19 тыс.

Просмотров 254 тыс.

50% 1

In this video I will show you how to make your own ash glaze. And it's actually a very special ash glaze - because I will be using the left over ashes I get from pitfire.
I will show you everything from cleaning and filtering af ash, how to mix the glaze, adjust it, glazing your pots, fire them and how it all ends up.
The recipe I use in this video is:
1/3 Ash (575g )
1/3 Nepheline Syenite
1/3 Quartz
Visit my webshop at:
www.demib.com
Subscribe to my Facebook Pottery Page here:
/ demibpottery
Please subscribe to this RU-vid channel
/ @demibpottery
Follow me on Instagram to see my newest pottery:
/ mikkeldemib
Visit my Webshop at: www.demib.com
INDEX:
00:00 Welcome
00:33 Making your own pottery glazes - and ash glazes
00:51 Using pitfire ashes for ash glazes
01:58 Cleaning up and filter the ashes
02:20 Recipes for mixing ash glazes
03:20 Safety: Wear mask, protection glases and gloves
04:38 Siev the ashes
10:52 Maxing the ash glase elements
15:23 Adjusting Specific Gravity and filtering the finished glaze
20:10 How to measure the Specific Gravity of your glaze
27:08 Using the new pitfire ash glaze - mixed with other glazes
35:28 Loading and fire the pottery kiln
36:16 Two days later - unloading the kiln
43:46 Comments on the results of the pitfire ash glaze
45:35 Photos and comments to all the glazed bowls

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 227

@merryhunt9153 23 дня назад

Ooh, I love those beautiful turquoise-blue bowls!

@deMibPottery 22 дня назад

Thanks :-)

@andrewroos152 5 месяцев назад

That was fascinating! I will be processing ash from my wood stove as soon as it gets a little warmer. Your tutorial was just what I needed. I love the simplicity of the recipe, and it is great that I can have 1/3 of my glaze from a byproduct I already have. Thanks so much!

@deMibPottery 5 месяцев назад

Thanks :-)

@deanfrost9494 Год назад

This was an interesting and inspiring video. I'm sure it showed up in my feed because I saved some clay from digging post holes. I worked hard to get it out might as well see if I can do anything with it. Found a great ancient pottery channel. The clay is still drip drying or perhaps it's called maturing, I know nothing about this. I'm a bit of a junk artist and the idea of making pottery glaze from waste ashes and maybe using the clay from my post holes. That's almost too good to be true. I'm off to watch more of your content.

@deMibPottery Год назад

Thanks a lot :-)

@fairygodmother68 6 месяцев назад

Thank you for taking the time. I learn so much from your videos 😊🙏✨

@deMibPottery 6 месяцев назад

Thanks. Good to hear 🙏

@gigi3242 2 года назад

It's wonderful to hear the Joy in your voice as you're unloading the kiln. Beautiful pieces. Thank you for the video.

@deMibPottery 2 года назад

Thanks. Glad you enjoyed it :-)

@asnathazan Месяц назад

Beautiful results, very generously shared. Thank you so much.

@deMibPottery Месяц назад

Thanks. Glad you enjoyed it :-)

@JbScot 3 месяца назад

Just found your channel via YT autoplay, Mikkel, and I'm so very pleased about that! What a fantastically detailed view into your world, plus the joy in your voice during the kiln unloading is dangerously infectious! 😂 Subscribed as I've absolutely no doubt I'm about to learn a great deal from you 😊 Best wishes from Caithness, Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

@deMibPottery 3 месяца назад

Thank you so much your kind words. And welcome :-)

@noemisecone1377 Год назад

Thank you Michel. Beautiful pots and glazing. Ester from Australia.

@deMibPottery Год назад

Glad you like them!

@jamesyoungquist6923 7 месяцев назад

My favorite combo is ash and temmoku gold, and floating blue over white. Bravo

@deMibPottery 7 месяцев назад

:-)

@321ReadysSetG0 2 года назад

Very interesting - I've often wondered how to process ash glaze -thank you

@deMibPottery 2 года назад

Thanks :-)

@rickstrodder129 2 года назад

That gold and blue are killer! Thankyou for ANOTHER fabulously entertaining and informative film. Loving your channel

@deMibPottery 2 года назад

Thank you so much :-)

@Traveler1226 Год назад

Outstanding information in this video! I thoroughly enjoyed this. And the results at the end were wonderful! Thank you very much for all this detailed information. Very generous of you. I look forward to trying this for myself. That floating blue with the Temmeku gold is a real winner. Thank you!

@deMibPottery Год назад

Thank you so much for the kind eord ❤️🤪

@krissader4855 3 месяца назад

I am behind using ash from the barrel firerings. I loved some of the results on the rims with the other glazes. Can't wait to see it with the ability to melt at a lower temp. Yeah!

@deMibPottery 3 месяца назад

Good to hear :-)

@julianvandercook Год назад

This is exactly what I was looking for. Thanks for sharing the info.

@deMibPottery Год назад

Thanks. Glad you like it 🙏❤️

@zaliecranwell432 8 месяцев назад

Oh, just found my way to your RU-vid channel and found your ash glaze recipe, thx 😊

@deMibPottery 8 месяцев назад

My pleasure 😊

@panzertolik 9 месяцев назад

Thanks for the video! Here's a tip for adding limited water - use a sponge. Put it in the water first. Then you squeeze it slightly above your tube and add a drop or two to get the desired weight. I use a sponge for painters, it's on a wooden stick and has round shape.

@deMibPottery 9 месяцев назад

Thanks :-)

@1970NoName Год назад

I love the ash glaze. It looks like wood fire from a cone 6 electric kiln. Brilliant!

@deMibPottery Год назад

Thanks. Yes, it does gove it sort of a wood fired feel ❤️

@sajidahussain7276 Год назад

This is exactly for what I was searching

@deMibPottery Год назад

Good to hear :-)

@poulinolivier3677 3 месяца назад

ur so cool! Im starting my journey with glazes and this will be one of my first experiment! thank you for your passion

@deMibPottery 3 месяца назад

Thanks and good luck on your journey

@gojec29 2 года назад

This VDO is absolutely wonderfull and very well explained Thank for 😍

@deMibPottery 2 года назад

Most welcome 😊

@kseniafurmanova391 Год назад

Thank you so much for such magnificent video!!

@deMibPottery Год назад

Thanks 🙏

@Jazzgin Год назад

Amazing work Mikkel! Was such fun watching your work. Lots of love from Istanbul ❤

@deMibPottery Год назад

Thank you so much! :-)

@mosseyw 2 года назад

Thanks for the very informative video, I have just got a big bucket of ash from pit fire 🔥 I’m looking forward to testing it 👍

@deMibPottery 2 года назад

Thanks 🙏

@DunoonVanRijn-dx1hr 3 месяца назад

Thank you I have enjoyed your Journey and that is because you are so enthusiastic. Excellent entertainment 😀

@deMibPottery 3 месяца назад

Thanks :-)

@HandyPaladin Месяц назад

I'm about to see the pots and I'm excited. And I'm not even there. 😂

@deMibPottery Месяц назад

Good :-)

@credenza1 Год назад

Fascinating. The temmoku seems to glow.

@deMibPottery Год назад

Thanks - yes, it does :-)

@mohammedegyptian2527 7 месяцев назад

very informative tutorial , good work

@deMibPottery 7 месяцев назад

Than you 🙏

@Cate7451 Год назад

Excellent how to video well done.

@deMibPottery Год назад

Thank you 🙏

@DunoonVanRijn-dx1hr 4 месяца назад

Very nice ❤

@deMibPottery 4 месяца назад

Many many thanks

@tlc1718 Год назад

Do luv the music ,and strangely I can still hear you (: Still here cant wait see this (: thanks learned so much

@deMibPottery Год назад

Thanks :-)

@tlc1718 Год назад

I luv the them all ,will enjoy doing ash (: Thanks for sharing

@haladudatti8906 10 месяцев назад

fantastic

@deMibPottery 10 месяцев назад

Thank you so much 😀

@stickyfox Год назад

I love being surprised by the scraps of metal that end up in the ashes in my kiln.

@deMibPottery Год назад

All sorts of things can end up there :-)

@TheSunnyTrails 2 месяца назад

I’d love number 13 as a bonsai pot 😱😱😱

@deMibPottery 2 месяца назад

Thanks. Could work :-)

@s.missizhippiew.1117 2 месяца назад

Very nice… did you dip the pieces or sponge them on? I would love to see a video of how you apply the glazes… thanks so much 🌸

@deMibPottery 2 месяца назад

Thanks. I think I dipped these ones.

@oncearosestudios Год назад

Suggestion: Get a litter scoop to work out some of the biggest chunks might shave off some time?

@deMibPottery Год назад

Good idea! :-)

@kwazhims3lf Год назад

43:51 "i just want to add a few comments, to my *_ass_* glaze" im dyin

@deMibPottery Год назад

Transskriptions are not always perfect :-)

@kwazhims3lf Год назад

4:57 "theres always lots of shit left in there" im dyin

@deMibPottery Год назад

But there is :-)

@egor_fruit Год назад

Bless 🙏🕉 Thanks for so good structured and clear information. Have been looking for ash glazing for a while and here it is 🎉 What is the lowest temperature of firing for this glaze recipe?

@deMibPottery Год назад

Thanks. I fire it to cone 6. Not sure it would melt out right much lower but could probably go up a couple of cones

@brendaross84 9 месяцев назад

Hi. Thanks for your reply to my question about the word”zenite “ . In the video, at approximately 10:47 you mention that you are going to use the same ingredients in the recipe that you “used before”. I just need clarification on what the ingredients are as I was unable to understand a few words. Thanks for your patience in this matter. I am really enjoying your videos. Very informative and entertaining as well .

@deMibPottery 9 месяцев назад

Th recepie I use is in the description :-)

@cogjellying Год назад

Mikkel, my question to you is about your choice of the number in your specific gravity calculation. When should that number change and when or why would other ratios and or other ingredients or additives affect your desire for greater or lesser weight/ density? beautiful work ❤

@deMibPottery Год назад

It depends on the kind of glaze and application. If sprayed in have to be a bit thinner. Some glazes need a thick layer - and a thicker glaze, som a thin layer. It all depends on the glaze. A SG around 1.40 to 1.45 is often a good starting point

@ludouglas1 8 месяцев назад

Loved this as I do have a lot of ash from pit firing. the only thing is that I have an electric so it is very important to not put salt into your pit fire as that salt will be in your ashes and do damage to your kiln. ( can you please make the music a bit softer as it was quite loud in this video. thank you, Mikkel) You had a lot of ash. I find it's very light and it would take a lot so I wish I had been keeping the ash from past firings, I'll keep it in a bucket from now on thanks to your great tutorial. (love your purple shirt, Mikkel!!! :-) I dip my glazes so could I dip in the glaze if I mix it to pouring cream? Looking in the kiln before it's ready to fire is exciting and amazing. I can't wait to see how it turns out. OH MY GOD, I have been writing parts of this comment as the video has been going and the results are gorgeous. Absolutely loved this video so thanks heaps.

@deMibPottery 8 месяцев назад

All I can say it the glaze works well for me :-)

@kotichos 2 года назад

Thank you for demonstration wonderful experiment with ash glazing! How do you think if it will go well if colorize ready ash glaze within different pigments or commercial glazes? Will it change its grey color? And other question on what temperature you fire your pieces? I mean max t? Thank you a lot, you are cool potter master!

@deMibPottery 2 года назад

Thanks a lot :-) I never did, but I assume you can mix in stains or oxides in the glaze to change the color. Just be aware, that some colorants also change how the glaze reacts. For example Cobalt makes it more runny. This glaze actually gives a very nice green color when applied on top of some of my other glazes. I used it (although not quite enough) on my recent Fermenting Crocks. There is a video about it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IvSBMO1B0Jo.html

@juliejames-eb5vc Год назад

Thanks for this great video.. How much ferro frit do you suggest adding?

@deMibPottery Год назад

Thanks :-) I have not made it with frits

@tarajjohnson4715 2 года назад

Hi Mikkel, I was wondering are you able to make an ash glaze with just silica and ashes? I've heard of using clay into the glaze, but when I tried the 50/50 ash and clay, the glaze did not come out the way I liked, so I saw this video, but I'm not sure where I can get the third component mentioned in the video.

@deMibPottery 2 года назад

I am not 100% sure :-) Pottery supply store should have all you need. I use BSZ in Germany and Scarva in Irland.

@Ghost_Os 6 месяцев назад

Did you ever find a way of doing it without the need to purchase exotic additives? I want to make a glaze using only what I can source locally, directly from nature. I don't even care about how it looks in the end; just wanting a way to make the pottery waterproof (I'm making vessels to store water in, so want to avoid even a slow leech).

@EcuriesDesservettaz 5 месяцев назад

Thanks for this video. Is it possible to know which floating Blue recipe you use? Do you think it could be possible to add oxyde directly in the hash glaze?

@deMibPottery 5 месяцев назад

The one I use is close to the one OldForge have a recipe for, with Manganese instead of RIO. Adding pur oxide - not in a wash may be too much. But try :-)

@saidsahra15 Год назад

Beautiful work. I have question did the ash glaze make pottery waterproof (I have 0 experience in ash glaze)

@deMibPottery Год назад

Yes, if your ash glaze is applied thick enough and fully melt it will be as water proof as any other glaze. But I mostly use it on top of other glazes to add some variations to colors.

@saidsahra15 Год назад

Beautiful work want i can use alternative to feldspar plz

@deMibPottery Год назад

Thanks :-) You probably need a completely different recipe. You can find many on Glazy.org or in books dedicated to ash glazes. I just use this because it works well for me

@ludouglas1 8 месяцев назад

I wondered if the pots at the bottom so I'm not sure it got to temperature down there and it might be good to have some cones in to see what work was done by the kiln before you changed the formula for the ash glaze

@deMibPottery 8 месяцев назад

This is a very new quality kiln. It fires very even

@jonashornung2896 Год назад

Great video! What was the temperature in the electric kiln for the glaze? Perhaps it is in the video. But I didn't see it 😅

@deMibPottery Год назад

Thanks - I glaze fire to sort of a cone 6. So it's set to 1220 C with a very short hold. So it may actually be a little bit above cone 6 in the end :-)

@ingridtingelingiaa4052 Год назад

Hello, which cone is this fired in? And what's the recipe for your other favorite glazes that you talk about in the video?

@deMibPottery Год назад

Cone 6 You can find variations of most of the glazes I use at Glazy.org

@monkeyeye9862 11 месяцев назад

Hello nice video i just wanted to ask are those bowl bisque fired already and are they burnish? Or Is this a raw glazing process?

@deMibPottery 11 месяцев назад

Thanks :-) Yes, they have been bisque fired first. No burnishing. Just thrown and trimmed.

@davidbean5807 Год назад

Have you ever used crushed and powdered eggshell in any of your slip mixtures? Just curious how it would react during firing.

@deMibPottery Год назад

No, but I used it in pitfire. Not much reaction though

@Sjahsam Год назад

Hi , can I make any glaze on clay or it should be stoneware ?

@deMibPottery Год назад

A glaze have to fit the clay you are using. This one is made for stoneware. It may, or may not, work on some porcelain. You will either have to calculate or test that

@YotamGuttman 4 месяца назад

24:00 a trick that I've seen before, might ve a little less of a hassle for you, people use those big plastic syringes with a ml count on the side. they tare the scale for the weight of the syringe and then fill it to the 100ml mark then measure the SG. its just much easier to handle a syringe rather than that tube of yours because it already has the measurements off the bat and it's easier to add/remove substance

@YotamGuttman 4 месяца назад

something like this: images.app.goo.gl/vMNbn6rtyfK1U3Fe9

@deMibPottery 4 месяца назад

I know but I far prefer the tube :-)

@JoesphBarron 10 месяцев назад

What cone are you firing at or is this for just for wood firing

@deMibPottery 10 месяцев назад

I fire this at cone 6, electric oxidation

@thecluelessbushcrafter Год назад

is the second ingredient "Nepheline syenite"? i couldn't hear it very well. thank you for the great video ;)

@deMibPottery Год назад

Yes, correct

@Mbb2220 8 месяцев назад

thanks a lot! I had a question though, i dont have access to feldspar or nepheline, nor do i have quartz. I do have some sand and my stoneware which are both high in silica, what if i mixed some calcium carbonate, the sand and ash and some clay for binding, made it a slurry, and used that? Would it be a viable low fire glaze?

@deMibPottery 8 месяцев назад

Thanks. I have no idea if that would work :-)

@dingodog5677 8 месяцев назад

I think ur Calcium carbonate would to lime when reduced and that could be an issue. It’d react with water, potentially explode the pot. Idk, try a sample.

@Mbb2220 8 месяцев назад

@@dingodog5677 ah, I see, ill try a small piece of cracked bisque, if it works, great. Otherwise I'll use some Terra sig- instead

@0lire0 5 месяцев назад

Thank you for this great video. Could you please let mit know the recepy of the ashglaze, I could not understand it becaus of the music or mask. Thank‘s a lot.

@deMibPottery 5 месяцев назад

Thank you :-) It is in the description below the video The recipe I use in this video is: 1/3 Ash (575g ) 1/3 Nepheline Syenite 1/3 Quartz

@DunoonVanRijn-dx1hr 3 месяца назад

You can spray the Ash Glaze on pots, it gives them a toasty look. See Simon Leach, however he didn't know how to mix the Temouka Glaze which is my favourite. Absolutely beautiful. I like Gas Firing. I don't really enjoy this method of pitfire., I feel sorry for the pots, they look like they have been murdered.😮❤

@deMibPottery 3 месяца назад

There are many ways to do pottery.

@davemartin1534 Год назад

Definitely some beautiful potery. But it seems to me as you open up the kiel to your surprise of color mix of what was fired was GOK (God Only Knows) the outcome.

@deMibPottery Год назад

I was indeed happily surprised :-)

@user-xj9dv6js4h 7 месяцев назад

Hi, what is the third material yiu used? Ash, quartz and....?

@deMibPottery 7 месяцев назад

It's in the description :-) The recipe I use in this video is: 1/3 Ash (575g ) 1/3 Nepheline Syenite 1/3 Quartz

@buckbeaksgarden761 Год назад

Hi there new sub here! I'm also new to pottery. Where can I get that floating blue glaze and the temmoku gold? I'm in Canada 🇨🇦

@deMibPottery Год назад

I do not think you can buy them. You will have to mix them yourself. Recipies can be found at glazy.org

@oranje2974 Год назад

I was told there is allot of salt in ash, and if you wash it a few times it helps

@deMibPottery Год назад

Some wash it, some dont. I dont :-)

@xm3364 Год назад

Oh no Mikkel! Where is the big bowl with ash glaze on the wavy rim? :-( I am as excited and happy as you were when the pots and bowls came awesomely well! Just a couple of questions, was the white at the bottom of the bowls came from the floating blue or Heath A2 white? Also did you make the Tenmoku Gold with John Britt's recipe and perhaps will you demonstrate this recipe, pls? Many thanks!

@deMibPottery Год назад

Thanks :-) The white is the Heath A2. Yes, its John Britts version - the one with lots of RIO

@xm3364 Год назад

@@deMibPottery The one with 11.24 RIO?

@deMibPottery Год назад

Yes

@xm3364 Год назад

@@deMibPottery Thank you a for your tutorial and Happy Teacher's Day!!

@Manda11.11 Год назад

Hello l have a old backyard furnace l am thinking to make it into a wood fired pottery kiln.. l am guessing the highest temperature would be glowing Orange? Would these glazes work? Or ls the temperature too low ? Thankyou for your time ❤

@deMibPottery Год назад

Thanks. This ash glaze needs at least 1200 c to melt. Not sure you would reach that

@Manda11.11 Год назад

@@deMibPottery thankyou for your reply.

@wayman29 Год назад

What cone did the firing go to?

@deMibPottery Год назад

Cone 6

@hanavesela5884 Год назад

Hi what was the white stuff mixed with the ashes please?

@deMibPottery Год назад

The recipe is in the description :-) The recipe I use in this video is: 1/3 Ash (575g ) 1/3 Nepheline Syenite 1/3 Quartz

@annefagrew5807 2 года назад

Hi Mikkel, another great video.... but please don't play the music so loud on the soundtrack... it's very distracting.. thank you

@deMibPottery 2 года назад

Which part do you mean?

@hannibalannie 2 года назад

@@deMibPottery the beginning few minutes..., it got better further into the video,, . Thanks again

@deMibPottery 2 года назад

It's my daughter playing music in the garden. Not possible to change :-)

@rosalindgerber Год назад

i liked the music

@sandracartica4932 Год назад

In my opinion, the music is not necessary when you are speaking. I only want to concentrate on your voice and what you are saying. The music at the end when you are showing the pictures of your pots is nice. I especially liked the bowl with the floating blue and the ash glaze on the rim. Really, I loved the way all of the pots turned out! Very good work!!!

@barropretosr Год назад

Great video! Can you tell me the recipe for the floating blue. Thank you

@deMibPottery Год назад

Thanks :-) I use a variation of this: glazy.org/recipes/77013

@barropretosr Год назад

@@deMibPottery thank you so much

@karlthepotter4228 5 месяцев назад

To measure specific gravity I have a 50mL syringe which I tare on the scales. Then I draw up 50mL of glaze and weigh it. Say this glaze weighs 70g then 100mL would be 140g and so SG=1.4

@deMibPottery 5 месяцев назад

I know some use that method. I like the one I use and find it more precise. But both can be used :-)

@doveseye.4666 Год назад

The chemical of ash is salt, clean the fire ash and filter you will have crystals you can put in glaze, what do you think of spagyeric ash for medicine, i use it to make tinctures?

@deMibPottery Год назад

Some wash the ash - some don't. You can do it both ways. I don't :-) I do not know spagyeric ash for medicine

@doveseye.4666 Год назад

@@deMibPottery I guess the difference is washed for the salt for medicine, tinctures, I never heard of not washing, I make medicine but love the vessel so why I’m here.

@sandrapalomaaldunatepage3467 21 час назад

🙏🏼💫

@deMibPottery 16 часов назад

:-)

@gtmorgan6864 Год назад

I thought of the 3134 before you said it to lower the melting temp. LOL

@deMibPottery Год назад

There are lots of options to adjust this base glaze but it works well for me as is :-)

@joachimschreiber7835 Год назад

i get the steel out with the magnet of an old stereo speaker. the charcoal pieces remaining in the sieve are good as coal.

@deMibPottery Год назад

Great ideas. Thanks :-)

@roxysue8784 8 месяцев назад

Can you use ash from a Raku fire can?

@deMibPottery 8 месяцев назад

Probably yes. Try :-)

@joyceradesca408 7 месяцев назад

Hi Mikkel, you used 1/3 ash, 1/3 quartz and 1/3 what else ? I must use the translatier, sometimes it said wrong words Thank for your fantastics videos

@deMibPottery 7 месяцев назад

You can see it in the description :-)

@joyceradesca408 7 месяцев назад

@@deMibPottery thanks I think it could be feldespato, bye

@saidsahra15 Год назад

Can i glaze earthware clay with ash glaze

@deMibPottery Год назад

I think so. I never work in earthenware. But you will have to adjust your recipe to the lower fire temperature

@RiccardoCavallari1 4 месяца назад

🙏🙏🙏🙏

@deMibPottery 4 месяца назад

:-)

@lidiaorecchio1021 Год назад

I'll like to know the temperature of the klin for this ash glace

@deMibPottery Год назад

I fire all my glazes to cone 6 (so approx 1220 C top temp with a 15 minute hold)

@lidiaore Год назад

@@deMibPottery grazie mille

@deannak1841 Год назад

It would be great if you’d give the recipe in the description

@deMibPottery Год назад

Good idea. I just added it to the description. It is: 1/3 Ash (575g ) 1/3 Nepheline Syenite 1/3 Quartz

@deannak1841 Год назад

@@deMibPottery wonderful, thank you

@brendaross84 9 месяцев назад

What is the zenith called. Thanks

@deMibPottery 9 месяцев назад

Not sure what you mean?

@brendaross84 9 месяцев назад

@@deMibPottery sorry but I couldn’t understand what was said. I thought you called it more than zenith? Not even sure if zenith is the right word. I think it was an ingredient in the ash glaze or was it something you put in or on the pot before you put on the foil. Thanks.

@poptartmcjelly7054 Год назад

45:55 i think if you only applied the blue glaze to one side on top of the ash glaze you could make it look like water on a beach.

@deMibPottery Год назад

Thanks. Maybe :-)

@raselmridha903 10 месяцев назад

How name ceramics ceameculs

@deMibPottery 10 месяцев назад

Not sure what you mean?

@luismanueltrompiz1884 Год назад

no le entendi el tercer ingrediente . ceniza, nepheline syenite y el otro no lo entendi

@deMibPottery Год назад

The recipe is in the description :-) The recipe I use in this video is: 1/3 Ash (575g ) 1/3 Nepheline Syenite 1/3 Quartz

@asnathazan Месяц назад

What is A2 white , Heath A2 white?

@deMibPottery Месяц назад

Yes

@ginafeddersen8200 2 года назад

A good video Mikkel but the Music is not neccessary in the background especially with singing as it interferes with trying to hear you😊

@deMibPottery 2 года назад

Thanks. My daughter was in the garden that day enjoying herself - and yes, she played music. Thats just how it is :-)

@DunoonVanRijn-dx1hr 3 месяца назад

Your throwing is good, so stop murdering the pots. Choose natural colours and your floating blue is beautiful 😻

@deMibPottery 3 месяца назад

I do my best but taste is subjective :-)

@atiqchaudhary2529 10 месяцев назад

Please add ingredients quantity ?

@deMibPottery 10 месяцев назад

I did. Read the description :-)

@sandgrains3418 Год назад

Hola, soy un abismo en la cerámica primitiva, y por favor ayúdame, lo que quiero preparar un revestimiento de metal para cerámica, tengo el dinero para comprar tintes de esmalte,

@deMibPottery Год назад

I am sorry, I do not understand your language :-)

@sandgrains3418 Год назад

@@deMibPottery You,,, yes, language,,,, speak,,,

@jasonpatterson8091 Год назад

I'm not sure if the music is just playing at your home or if you added it later as a background soundtrack. No objections to the song, but using it while you are talking makes it difficult to hear what you are saying for people with hearing issues. I just wanted to share that point of view, in case you hadn't considered it. I really enjoyed the video and appreciate you sharing your knowledge and experience. :-) Have a great day!

@deMibPottery Год назад

I know. My daugter was in the garden that day playing music. Only noticed after I did the video but decided to share anyway :-)

@martinsycholt 2 года назад

there is no sound

@internet-1856 2 года назад

I have sound.

@deMibPottery 2 года назад

I have sound too

@bobhoye1462 2 года назад

on mine there’s a speaker icon with a line through it you have to click on to turn the sound on.

@sabina7422 Год назад

Love the musik but not when you speak..

@deMibPottery Год назад

My daughter was in the garden that day playing around. We all have to be here :-)

@beverlytoves9630 28 дней назад

The music in the back ground is very distracting

@deMibPottery 27 дней назад

My daughter was enjoying the day in the garden too. Not much I can do about that :-)

@Outlaw--JesseB 22 дня назад

Well can BARELY hear you between the music and the birds so I have no clue what else you put in the bucket besides ashes 🤷🏻‍♂️

@deMibPottery 22 дня назад

But those details are in the description below :-)

@Elin.Noller Год назад

Due to your lack of enunciation I had some real problems understanding you. Common word where not much of a problem, but other things were impossible. Like I could figure out that "ass" was ash, and "quats" was quarts. But the other white stuff you put in I have no idea what you said since it not something I'm familiar with. Subtitles did not help at all, it just made it worse.

@deMibPottery Год назад

The recipe is in the description :-)