'58 Gibson GA-20 Amp Repair 

You don't have to wait for a special amp to document. I'd watch you work on just about anything. You're an amazing tech. I love how all your leads go through and get wrapped around before soldering, your attention to detail is fantastic!

I'm a moron when it comes to electronics; but I LOVE watching these videos! What separates you from others is your very down-to-earth and humble approach without all the "engineery" talk. Go you! :)

Hey sister! Just wanted you to know you gave me the confidence to fix my Blues Jr! And I did! You’re a superhero and we all know it

It is nice to see someone using wire cutters to strip wire the correct way.

The “Just Got Paid” bit at the end was the best part. Amazing work, and I subbed instantly.

For me As an old solder soldier , that video was a pure pleasure to watch, not to mention the awesome sound.👍👍👍👏👏👏🇨🇭

Just an FYI, your ground wire on the power cord should be the longest of all 3 so if the power cord ever gets pulled out for some reason, the ground is the last wire attached. Love the videos!

This amp is so clean it looks like a reissue

Good to see you back! That amp is off the charts beautiful.

This was another fine video. Once again, your calm voice and thorough explanations were not only informative but relaxing. For an old electronics test engineer like, me, it's a treat.

That is a clean amp for sure !!! Thanks for the video ❤

That amp is a beaut and it sounds awesome!!! Nice troubleshooting to get it going, thanks for sharing your processes with us. Look forward to the next vid.

So nice to see you ina new video and yet another amp project.🥰

Awesome! Thank you for passing on this incredible knowledge and passion.

The amp matches your decor! Thank you so much for this video. I learned a lot!

Man that top panel was super clean! Great video and always a pleasure watching you walk us through your thought process as you sort it out!

You make it look so easy. A true professional 🎉

Totally awesome that an amp of that age is up and rocking. Fantastic video.

So good to see you back!

Really do love watching and listening to you work your way through these wonderful old amps. Thanks for sharing your talent and knowledge with us. Also love to see the smile at the end, tells us you know the job was well done and you are happy with the result.

As always, it's a pleasure to watch you work, Colleen. Stripping wires with your cutters???? You are totally aware that is a very tricky, acquired skill that most cannot master. No matter how many times I tried, the failure rate was so astronomical, I've been related to using strippers. Only a true master as you, can achieve the results you do using your cutters. Be proud and do not let those that may not have acquired the skill you have mastered bother you. (I'm not trying to p*$$ anyone off, but maybe they are more in my category than your master craftsman category, so be proud and keep on keepin' on!!) That amp looks like my amps do now that I'm in retirement...Very pampered and well taken care of. While I was playing in 1962, I was gigging then (back then we called it playing because a gig was not a term we used in my rural locale, but I digress, and totally age myself) and my amps...well...were far from pampered (Today's term "road worn" is more applicable, but, back then it was a detriment, not something desired in the least). This gem is priceless. The Logo and face plate still being basically perfect is totally amazing. Fantastic job of a perfect restoration to better than original sound while keeping everything as close to original as possible. Please keep the great videos coming!!!

Nice work as usual Colleen! Keep these classic amp videos coming. Always enjoy watching the revival of gear from yesteryear.

Love these vids, seeing and learning about these old amps

Glad to see you back!

Wow you’re back! Great vid and incredibly luscious couch!

Hi Colleen, it's a pleasure to watch you work. So confident, thorough, and calm. Thanks for the video.

Great to see you back. I love that you always explain what you're doing and why. What a beautiful amp. I very briefly had a 1960 version, but I was stupid enough to do a video on it, and my friend offered me too much money for it to turn down.

Good choice on the F&Ts and that SG was a perfect pairing for this amp! Nice work!

The camera work was top notch. Loved the explanation of each step in the thought process.

This was a pleasure to watch. I'm so glad I found this channel. I have tried so hard to get younger people in my life interested in old school electronics but no luck. this makes me happy

It’s just great to see that you utilize the old while installing the new … just fantastic!

Very nice little amp , great condition, I like that you show everything you do most videos that people make just snap their fingers and it’s all done you show us the procedure, very well done

Holy crap!!!! That thing is in amazing shape!!! Thanks for sharing this

thanks for making videos, its very helpful for someone new to this like myself, keep doing what you do

Your soldering game is elite, kudos.

Beaut of an amp, great service and your dog is adorable

Thx for actually showing your soldering and wire stripping technique's ... That's what makes your vids so interesting to see you do the repairs in real time ... And I wore my Fazio Electric cap in your Honor

Beautiful old amp from my birth year. Great video, as always!!

Fantastic amp!! Colleen Fazio is a super star

Never saw an amp with so few components, love that point-to-point wiring. Simple, elegant. What a treat!

Nice work troubleshooting that hiss and crackling. It can be hard sometimes to figure that out (for me anyway!) The amp sounds great too! Thanks for the video!

This Chanel is my favourite ❤️ as a musician and amp enthusiast I can’t thankyou enough for your videos and wealth of knowledge not to mention your soothing voice and electronic skills 😊

What a gorgeous, clean amp. Even a layperson like myself can appreciate the beauty in its circuitry and the skill and knowledge of a pro like you. This amp looks and sounds amazing! Cheers Colleen

Great bare bones maintenance…just what it needed. I have a 55’ GA45 Maestro that’s needing this same tlc!

Great job ! Very good video.

Wow! Looks mint...unbelievable!

It has been many decades since I saw Astron caps in equipment. The old tubular ceramics of that style I have not seen except in post WW2 TV sets or military equip. Nice job on the repair.

Watching your videos makes me want to sharpen up on my electronics knowledge and relearn the things I used to know.

It sounds so good!

Colleen i loved seeing an antique come back to life under the skilled hands of a pro like yourself. It has been a passion of mine that only stayed at a "hobby" level. But i will dive into it more at another time. Love your shop "mascot". ❤❤

Fantastic video, excellent work on one of the best amps. The 20T is also an awesome amp.

Excellent video. Hank is just adorable, by the way. He deserves much more screen time in future vids, too.

Clean work as usual!

It's always satisfying to watch a dedicated professional like you. I do wonder if that IEC cord has sufficiently fine stranding to stand up to flexing for a long time though. Most gear I use those on is not portable.

the bloody knuckle is so relatable! Thanks for a great video!

Great job and a very well produced video. Kudos..!

Love to see someone with knowledge and skill ... . THAT is a sweet amp...

Fitting song to a great repair!

Thats such a killer looking amp! Sounds great too. Nice work!

It was nice to see an amp that was kept with it's cover on, and looked well designed on the inside. You made light work of the old power cord and dried up caps.

You playing at the end was a real treat!

A thing of beauty, a joy for ever! Lovely work on that amp. Your videos may be few and far in between but I always love watching them. I always use heatshrink tubing for mains connections not just for splices, but also for soldered connections on switches and fuse holders. The rule is to insulate as much on the mains side as practically possible. For the sake of original look, I'd consider gutting the old electrolytics and restuffing them with new ones, and leaving a service note, Uncle Doug style.

Great work and great amp!

So cool! Love the guitar and dog love at the end.

Love watching your videos!

I have an old (1954 Gibson GA5 Les Paul) amp that I've had fixed 3 different times. It sounds great, but if I ever have problems, I plan to repair it myself. Your videos are absolutely a great help. Thanks!

I’ve got an early 50’s GA-20. Absolutely love it. Currently my favorite tube amp. Thanks for showing the process of changing the caps.

Beautiful amp!

I love your videos. I just found you. Love your work. I hope you keep putting out videos.

Youre not lying! Amazing amp.

Excellent work very professional

Wow literal time machine. So rad

She’s back!

Wow, it's so peaceful and quiet there. All I can hear are the birds!

Colleen great job always enjoy your videos would love to see more‼️

Cool video as always. It takes skill to use side cutters to strip wire.

I’ve always used (30yrs) wire cutters to strip wire. You develop a feel for what your doing. Keep up the great work. Luv your channel.

You just brought me a major nerd moment. Your mention of the 6L6 and 6V6 tubes caught my attention, because those were two of the tube types that were used on the ENIAC. :) Although I don't play much guitar, I do love watching you refresh these classic amps. It's wonderful to see their lives continue.

This was a beautiful amp. Thank you for posting. I am 65 years old and have several real 'wire strippers' in my tool box. Out of all of them I find using the clippers much more comfortable for me. I can feel when I cut through the insulation and get to the wire.

Beautiful clean old amp and well done documenting. I noticed the dust on the speaker, I swear there is a well known singer songwriter Guitar nut in Liverpool that used to collect that dust cos he honestly believed that there is magic in the dust. He used to sprinkle it on his amp and Guitar before recording. Gather the dust and put in a little glass bottle labelled (1958, magic fairy dust)?. True story I swear. I won't ask for a discount if I get my amps serviced because the dog will bite me and then "old faithful" would weld my shoes to a lamp post...happy to pay full price..always! Still can't believe how clean that Gibson amp is, looks like it was built last year..and sounds like a new amp too! Brava.

Very clean work nicely done

that is so clean!! holy cow

Very instructive video! Nice shop dog too.

Your videos are awesome!

Hello! I enjoy your talent. It's very refreshing to see someone who is actually doing something besides making ducklips for likes. I have always loved electronics. My parents bought me a Radio Shack 150-in-One electronics project lab one Christmas. I ended up becoming a Xerox copier repairman. Watching you repair vintage amplifiers is the coolest thing I've seen a lady do on RU-vid. Thank you for making these videos! You Rock!

Now that Gibson owns Mesa I keep looking for a reissue of some of these old Gibson-branded amps. Oops, I forgot something. Hello, Hank! Who's a good boy, you're a good boy!

Good to see another one of your excellent videos..Thanks for sharing..Cool amp..Ed..uk..😀

I admire your skill and work you do. I only know about amps from this.

Nice & neat job 👍

I love these amps! I had one but was told it needed parts that couldn't be found and I needed two hips replaced so I sold it: but mine was older than this one. And Girl. You are a cutie!! Lucky shop dog!

To clean the input jacks, fold a thin strip of fine wet/dry sandpaper over on itself, insert a plug to separate the contacts, insert the sandpaper, remove the plug and move the sandpaper back and forth a few times. As a Texan, it was nice to hear some ZZ Top for your playing test! 😃

Cool to watch that Amp being repaired.

I got a GA-20T, been using it cranked for years as my main amp, love the trem. Haven't had to do any repairs in the 13 years I've had it. caps were replaced probably 15 yrs ago, and new speaker installed. Was nice to get a bit of a run down on the insides. Probably should replace the filter caps one day soon.

Aww what a supportive dog ❤

I have a ‘54 GA5 and LOVE it. It sound as good or better than a Champ from the same era at a fraction of the cost.

Nice video. These little old amps are so simple to fix and sound great. I’m sure that they would sell like hot cakes if somebody could manufacture them today and sell them for a reasonable price.

Love the old Gibson Amps. I just built a GA-18T from scratch as I can't afford to buy a real one.

Doing a major rebuild on a '65 Vibrolux Reverb on my channel right now! Love watching this kind of stuff, been about a 2 week project on the Vibrolux so far, lots of care going into it. I was even rocking my Fazio shirt in one of them 😆

A very nice repair, that's an interesting guitar amplifier.

A fantastic amp and service.