6 Drawer Dresser/Changing Table Build | How-to

Подписаться 195 тыс.

Просмотров 120 тыс.

50% 1

How to build a dresser/changing table! Step by step how I built this 6 drawer dresser/chest of drawers.
Full Build Plans - www.johnbuilds...
All my other plans! - www.johnbuilds...
Check out the new Laguna Planers! - bit.ly/3ESrcJv
All tools/products Used:
Freud Router Bit Set - amzn.to/3rAQQfH
Laguna Planer - bit.ly/3eVxkWa
4’x8’ Bora Centipede Work Table - amzn.to/3uN1h11
Router Coping Sled - amzn.to/3742G8E
Bosch Router Table - amzn.to/2UOMAxj
Bosch 2.25hp Router - amzn.to/2VbCyX1
Table top Z clips - amzn.to/3iIyci4
Porter Cable Biscuit Joiner - amzn.to/3zxDIuw
Milescraft Center Finder - amzn.to/3iTEhs7
Milescraft Dowel Jig - amzn.to/3i2qAIa
18” Soft Close Drawer Slides - amzn.to/3zAhjNm
Iron-on Edge Banding - amzn.to/3x1Aw8R
Edge Banding Trimmer - amzn.to/372pcz2
Rubio Monocoat Natural - amzn.to/3iTCfIv
White 3M buffing pads - amzn.to/3BCBITT
Johnson Paste Wax - amzn.to/3BGnYHz
True Position Tools Hardware Jig - amzn.to/3dQXU1w
Bar Drawer Pulls - amzn.to/2L7Cpf7
Mirka Sandpaper sample - amzn.to/3cJkBEd
Makita Cordless Plunge Track Saw -amzn.to/3mpcsdF
Kreg K5 Pocket Hole Jig - amzn.to/33AHD9E
Kreg MultiMark Measuring Tool - amzn.to/33yioF0
Kreg Face Clamp -homedepot.sjv.... or amzn.to/2OVEY5g
Kreg Right Angle Clamp - amzn.to/3t8rINf
Dewalt 20V Max XR Brushless Drill & Impact Kit - amzn.to/3elOMRA
Dustopper Dust Separator - homedepot.sjv.io/0J2zVO
Milwaukee 18g Brad Nailer - amzn.to/3mDFvJe or homedepot.sjv....
Milwaukee M12 23g Pinner - homedepot.sjv....
Bessey Trigger Clamps - homedepot.sjv....
Milwaukee M12 Fuel Hammer Drill & Impact gun - homedepot.sjv.... or amzn.to/2OWb4h9
Delta Dust Collector -amzn.to/3e2ZYF6 or homedepot.sjv....
Delta Cruzer 12" Miter Saw - amzn.to/3sCK88c
Dewalt Sander - amzn.to/2HuKJXX or homedepot.sjv....
Glue Brush - amzn.to/3jgZBHE
Bessey 50” Parallel Clamp - homedepot.sjv....
Bessey 24” Parallel Clamp - homedepot.sjv....
Bessey 1/2” Pipe Clamp - amzn.to/2sn5soq or homedepot.sjv....
Ridgid Table Saw (New Model) -homedepot.sjv....
Rubber Mallet - amzn.to/3eDmv8O
Titebond Wood Glue - homedepot.sjv.... or amzn.to/2TnYIke
Playing Cards - amzn.to/3uChghB
Ridgid Jointer - homedepot.sjv....
1/2" White Oak Plywood - homedepot.sjv....
*As a Home Depot and Amazon affiliate I earn from qualifying purchases made through links on this post.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 326

@TuanBui-yp7oz 6 месяцев назад

Nicely done sir! I’ll be using this video as my guide to build my dresser….. well my grand daughters!

@Jamisonrand86 3 года назад

Man, John, what a beautiful build man! Maybe you could do some night stands next?! I told my fiancé when we bought our house that we weren't going to buy any and I was gonna build them! Still haven't built them a year later! 😂 Great work!

@JohnBuildsIt 3 года назад

I do have a night stand video and plans! Quite a bit different style though haha

@danielrybin2006 3 года назад

This is the most gorgeous dresser ever imagined.

@JohnBuildsIt 3 года назад

Haha I appreciate that!

@rolandrivard2667 3 года назад

Agreed! Nice work.

@Monuments_to_Good_Intentions 9 месяцев назад

why is it so hard to find a crib build and plans? I hope I can find one on your channel as well

@humbertocorona2008 2 года назад

how much would you sell one of this?

@gretahancock4725 2 года назад

Love this channel! I am also using this plan to build a freestanding kitchen design similar to an innovative new Kitchen Cabinet company out of South Africa- Milestone Kitchens! Thank you so much for giving us such a great tutorial. These are skills we all need to know and I am teaching this to my children as well in our homeschooling.

@JohnBuildsIt 2 года назад

Thank you I appreciate it!!

@alimirazimzadeh544 Год назад

Is the space in your shop larger than that of a standard two-car parking area?

@dirtychevyful Год назад

Do you know roughly how many board feet of white oak you used?

@TuanNguyen-iw7yg 3 года назад

Beautiful work! I'm going to have dreams about running dirty boards thru your planer :) .

@JohnBuildsIt 3 года назад

😂😂

@Tiger2000Lion2005 Год назад

I have that Px16 its great...just beware of laguna's customer service. I like the machine but b/c of the customer service with a previous PX16 I would not purchase again..great video though

@JohnBuildsIt Год назад

Bummer to hear! Unfortunately someone will have those experiences with every brand. Jets service is what pushed me to try Laguna haha

@thedr4gon 3 месяца назад

Got the plans and am mostly finished with the build. The instructions were easy to follow. Finishing up drawer face frames now. Question- Do you apply Rubio to all of the hardwood surfaces including the interior of the dresser and the rear hardwood stretchers? Thanks John! Can't wait for this to go in the baby's room. 😊

@JohnBuildsIt 3 месяца назад

Id just do the bottom of the top panel, since that’s such a large panel you want both sides to be finished equally for expansion and contraction. The rest of the interior will be fine without though 👍🏽

@tookie-doohomestead3996 2 года назад

Thanks John, awesome build, buying the plans for sure.👍

@JohnBuildsIt 2 года назад

Awesome!!

@mindyburns7536 Год назад

I really like this. I want to try and make my daughter a dresser for her spare room. The drawer fronts and sides will match the design of her kitchen and bathroom cabinets. I've used dowels and biscuits before, but not on anything this big. Are using dowels and glue more durable to attach the sides to the base than using pocket screws? Thanks.

@JohnBuildsIt Год назад

Yea they are. Pocket screws are just fine though if that’s what you want to do 👍🏽 along with glue of course

@jeromestsauver Год назад

I'm curious about a ballpark material cost...would you be willing to share? It's a beautiful piece by the way!

@JohnBuildsIt Год назад

I don’t remember, sorry! Tax man has my receipts now so it’d just be a complete guess

@AndreNon Год назад

Great build. Do you pre-finish the drawer interiors with a coat of poly (or similar)? Or apply it after, since clothing will be in drawers?

@JohnBuildsIt Год назад

Usually after

@mindyburns7536 Год назад

I finally purchased the plans for this today. I plan on painting it almost a whitewash to match the bed head/foot board she already has. I was thinking of using all poplar wood, or do you suggest another wood for the frame since I plan on painting it. Thanks.

@JohnBuildsIt Год назад

Poplar is great for painted projects 👍🏽

@lashellbrown8502 2 месяца назад

Do you happen to have a video on dialing your blade in? I often find that my ryobi miter saw is 2 hairs off. I’ve searched high and low on how to correct.

@JohnBuildsIt 2 месяца назад

No I don’t sorry. Good idea though!

@reng2762 Год назад

Love this design, just bought the plans! Your videos are so easy to follow. I appreciate how you keep it simple in your descriptions and edits to each shot. Can you design a King size bed to go with this dresser style?

@JohnBuildsIt Год назад

Thank you!! I do have a bed video and plans that I think could very easily be modified to match this if you want to check it out. It’ll actually make the build way easier. Probably just leave the legs square, not add the moldings, and then just personal preference if you want to add the grooves in the panels or just leave them square to match this better. You’ll see what I mean if you check it out 👍🏽

@reng2762 Год назад

@@JohnBuildsIt Thank you! I'll go check it out! And, these dresser plans are great. Easy to follow. I added a 3rd column of drawers since we needed it a bit longer. I'll tag you on Instagram when I'm done!

@gregpotts3535 3 года назад

Really enjoy your videos and love your clean looks. This is my goal to make this type of furniture for my grandkids when I have the time. You make it look easy and since I know it’s not easy, that means you are a talented woodworker. Thanks for sharing your talent.

@JohnBuildsIt 3 года назад

I appreciate that man, thanks for watching!

@kenwickbutterfield5666 Год назад

Great work, did the grain rise after applying the first coat of rubio natural Finish?

@JohnBuildsIt Год назад

No it doesn’t

@donaldhokanson3321 Год назад

That is absolutely beautiful, nice work

@JohnBuildsIt Год назад

Thank you!!

@soulsurfer079 Год назад

Looking to build a dresser for me and my sons, and great tutorial if I had 100k worth of tools

@JohnBuildsIt Год назад

If that’s the excuse you wanna make..

@bunnylou4993 Год назад

Welp, can’t build it onacount I don’t have a $20k planer.

@JohnBuildsIt Год назад

Always an excuse 👍🏽

@jasonramsbottom2185 Год назад

First of all, I love your work! I have downloaded the plans and will "attempt" to build this. Question: The Kreg jig listed is unavailable. Would you recommend the Pocket-Hole Jig 720 as a replacement?

@JohnBuildsIt Год назад

Yea that’s the newest model, so hypothetically should be better haha

@dianes2300 Год назад

Love my 720!!

@Gregoman89 Год назад

Sir you are quite skilled. I need some training from you.

@JohnBuildsIt Год назад

Thank you!!

@susanharrell2629 3 года назад

What a stunning dresser. Fantastic job!

@JohnBuildsIt 3 года назад

Thank you!!

@shagmesilly78 Год назад

Agreed. Looks fantastic

@razorbackstacker60 Год назад

Love the design and the video! In fact I like it so much I will be building one just like it. Can you tell me how much lumbar did you need for the build? Thanks.

@razorbackstacker60 Год назад

I bought the plans and its laid out perfectly.

@JohnBuildsIt Год назад

Thanks man! Enjoy the build!!

@frankcherry3810 2 года назад

Got the plans… now to watch video… again. Using RUBBER TREE wood. I have uncured 1x8. Got a new Dewalt dwe7492 table saw. Hello from North Thailand

@JohnBuildsIt 2 года назад

Awesome! Enjoy the build!

@timrr2010 2 года назад

I purchased your build plans but I still have a couple of questions? Any suggestion on where I can source some of the lumber from? I can not find square 1"X8" in hardwood from the box stores. Also, what material did you use to glue together to make your 2 1/4" pieces? Any help is appreciated!

@JohnBuildsIt 2 года назад

Everything I used is white oak, you can use any species you’d like though! Do a google search for “hardwood dealer near me” will be much, much cheaper than the big box stores

@jonvanschoick2673 2 года назад

Regarding your changing table, did you undersize box at all for snug fit?, also how wide are your sides. I have a pad coming, they say size is 32 x 3.5 x 16, I should probably wait until I receive and get actual dimensions, but thought I'd see what you did,

@JohnBuildsIt 2 года назад

My inside dimension is 32x15.75. 3.25 tall. Nice, snug fit!

@TeamProsperity 2 года назад

Great job, looks awesome and I like the addition on the top, well done. I’m getting ready to build an entire bedroom suite consisting of a dresser, two night stands, two chests of drawers and split king bed frame 😮😱 we have a soldia oak set that’s like over 30 years old and grown to hate it lol so we want something different and simple so I doing the build from Spruce Pine for rustic country look and I’ll be using Rubio, love the product. I used Cotton White on my daughters extendable dining table and coffee table I built her outta Ash, anyway many happy builds 👍

@markgarrett2971 2 года назад

Hey John, great build. My wife just sent back the particleboard baby furniture she ordered because it was all crap and reeked of formaldehyde once we opened the box. As such, I now have the go-ahead to build the crib, change table, and dresser. She loved your design. How many board feet approximately went into this build? Want to price out lumber and then buy the plans. Keep up the great content.

@JohnBuildsIt 2 года назад

Hey Mark, my receipt is for 55 board feet. But I can’t remember how much waste/extra I had left. All the dimensions are laid out in the plans though!

@wvquarterback775 8 месяцев назад

Best dresser I’ve ever seen, and the playing cards trick was a brilliant idea that I will be using

@omarflores323 2 года назад

Can you share the link to that dowel jig?

@JohnBuildsIt 2 года назад

It’s linked in the video description 👍🏽

@dansarfert3585 2 года назад

The project turned out great and you included some excellent tips. After a year, how has the Rubio held up? Does it need touched up yet?

@JohnBuildsIt 2 года назад

Not at all, still looks brand new! And it definitely gets tons of use as the changing table haha. I really like it

@sanramondublin Год назад

I appreciate your detailed explanation and preventing possible errors. I assume this is quarter sawn white Oak. This is the first oak furniture I liked. Thanks for fine work and making plans available. That is one of reasons I am a fan. Greetings from California.

@JohnBuildsIt Год назад

Thanks for watching!!

@joer5627 2 года назад

And I thought I was hot stuff with a wahuda 8”. Oh well! We have what we have and wish for what we don’t have. That is normal.

@JohnBuildsIt 2 года назад

I just think of it as goals to get to if I want. Thanks for watching man!

@DaileyWoodworks 2 года назад

Beautiful piece. I love white oak One tip to speeding up the edge banding is to apply it before cutting all the drawer parts. Yes you’ll waste a little bit of edge banding but you’ll save a ton time setting up 1/4 the amount of parts. You can also do this with the dado for the bottoms to speed things up a bit

@Franco4590 2 года назад

Excellent tutorial. I'll be referencing this video for my project for sure. Keep it going.

@JohnBuildsIt 2 года назад

Thank you!

@ernestoescobar9056 2 года назад

Hey sir, Awesome build! How long did it take you roughly to complete this project?

@JohnBuildsIt 2 года назад

I don’t remember at this point, sorry!

@derrickharris2702 2 года назад

My questions is did you use fine thread screws or coarse screws on the face frame? Love the build.

@JohnBuildsIt 2 года назад

Fine for hardwoods

@kyleropcean8968 3 года назад

Apply the edge banding before you cut the drawer parts to size on the miter saw. Basically, you edge band an 8’ long piece rather than a bunch of shorter ones. Saves tons of time.

@JohnBuildsIt 3 года назад

I have before! Personally feel like the shorter pieces are easier to hold steady, and same amount of time regardless

@Wood_Slice 3 года назад

Superb work m8 now i wanna build one myself. One tip you can use space balls if ur using solid wood panel inside a frame. The balls allow movement while still preventing it from racking side to side.

@JohnBuildsIt 3 года назад

Yea I do on like cabinet doors! These side panels won’t ever move and the drawers are held by the pulls so I saved my space balls haha

@woodshopnerdery 3 года назад

Thanks for the video, one of your best yet. Beautiful wood. Great design choices. Spot on craftsmanship. Very impressive. I'm a fan of dowels as well. I really like the Milescraft JointPro. I have given up on edge banding. I hate applying it and always chips off on me eventually. I have just resorted to 1/8th hardwood strips to cover plywood edges. I find it faster to make and apply, or at least it feels less tedious.

@JohnBuildsIt 3 года назад

Yea I think edge banding is still faster overall but you’re right it feels a lot slower and tedious!

@frankcherry3810 2 года назад

My planer sounds like a 747 plane

@JohnBuildsIt 2 года назад

Haha yep! Some are ridiculously loud

@chrisroyak4479 3 года назад

Another cool build with easy to understand instructions and helpful tips! If you find yourself with a need to build Adirondack chairs and want to make a video of it, I'd appreciate it! 😂

@JohnBuildsIt 3 года назад

Haha I do want to actually, just not real high on the priorities list yet!

@roballen9054 2 года назад

Great video. I bought your plans and modified to be a foot wider. Used red oak from Lowes because I don’t have all the milling tools. Thank you for the inspiration!

@JohnBuildsIt 2 года назад

Awesome man! Have you checked for a hardwood dealer in your area? All that I’ve been to offer dimensioned lumber as well, not just rough. A lot cheaper than lowes too!

@dg9714 3 года назад

Love the build. I’d really like to try building something like that. I know there is a lot more going on behind the scenes but you make it look easy. Nice work 👍🏼

@JohnBuildsIt 3 года назад

I appreciate it thanks for watching!!

@BandasPalette 3 года назад

John does do a great job. It is very simple when you break down each step. Little by little you can do it. How do you eat an elephant? One bite at a time. Good luck my friend!

@dg9714 3 года назад

@@BandasPalette thank you!

@nataschas.6560 3 года назад

Hi John. That Cabinet look very nice. Look good. Lovly Regards Natascha

@JohnBuildsIt 3 года назад

Thank you!!

@joer5627 2 года назад

Did you glue up the side panels since you used solid wood? If so, how did you find pieces wide enough?

@JohnBuildsIt 2 года назад

No they’re one piece. My local supplier had some wide boards

@etech1to1 3 года назад

Great build, great work. Can you please do a video on your drying rack and the clamp wall in your videos?

@JohnBuildsIt 3 года назад

Thanks man! I do have a video on the clamp rack already, check it out!

@tmab4887 3 года назад

You did a great job. I am jealous of your shop and equipment. What type od plywood did u use for the drawes?

@JohnBuildsIt 3 года назад

It’s maple, thanks for watching!

@ericorange441 2 года назад

That is a BEAUTIFUL piece of furniture!!! I enjoy your videos and thanks for being informative.

@JohnBuildsIt 2 года назад

Thank you!!

@taulataula9098 Год назад

This is awesome! I love to see how you built furniture out of solid wood. Now a days people don't make things out of solid wood anymore and we don't get to learn how to built solid wood furniture and control wood movement. Do you have other videos that you build sideboards and tables also made of solid wood? If so, I would love to support by buying your drawings to learn how you build them!

@JohnBuildsIt Год назад

Yep I have more on my channel 👍🏽 Thank you!

@FarrasAnwarZaidan 3 года назад

You are really detailing & neat craftman, love watch your video. Kept up your good work John, thank you for sharing.

@JohnBuildsIt 3 года назад

Thank you!!

@MichaelLangham 3 года назад

That's a nice piece John, thanks for your efforts here. And yes, I have subscribed based on those efforts, and your results.

@JohnBuildsIt 3 года назад

Thanks I appreciate it!

@bluecruiser3790 3 года назад

Awesome build mate! 👍🏻 Super clean design, with some beautiful wood and man that Rubio!!! Chamfered panel frames is a great touch. I gotta try that. I need a router table tho, I think it’d be tough to do using a hand held router.

@JohnBuildsIt 3 года назад

Yea man a router table will open up a ton of possibilities for ya!

@ARMYStrongHOOAH17 2 года назад

I never knew oak could be so beautiful!

@stacytessier7909 3 года назад

Hey great vid where did you get the zero clearance insert for your table saw I cannot find one. Thank you

@JohnBuildsIt 3 года назад

amzn.to/3zOhNjc

@georgevoisin5414 2 года назад

Excellent build. Great choice with the white oak. I'm fixing to start on a king-sized bed build with the same material. Can't wait.

@JohnBuildsIt 2 года назад

Probably my favorite species!

@JARMade 3 года назад

that looks so good!! well done!

@JohnBuildsIt 3 года назад

Thank you!🙌🏼

@snapjamwoodworks710 3 года назад

Can’t say this enough… another great build and presentation. I have the tools. You make it look easy so I know I have the skills to do this. Now I just need the time. Thanks for sharing.

@JohnBuildsIt 3 года назад

Thanks for watching!!

@AW-pz3qc 3 года назад

Just beautiful, the grain and colour of the Oak is so nice.

@JohnBuildsIt 3 года назад

Thank you!!

@jakeelliott6507 2 месяца назад

@@AW-pz3qc agreed. I'm working on a built in for my wife and looking at using this finish. Turned out great

@Lutzboater 3 года назад

Very nice dresser/changing table. Your daughter will sharing this with her children many years from now. The Oak with the finish you used is beautiful.

@JohnBuildsIt 3 года назад

Thank you! One of my favorite builds so far

@donniedavis7926 3 года назад

Great build. John, I have a question for you. I have the same Delta Cruzer miter saw as you. Do you have a problem with the sawdust blowing back onto your face with this saw?

@JohnBuildsIt 3 года назад

Not now with my dust hood and dust collector hooked up. But yea it’s pretty gnarly without anything lol

@ryanalfano5180 3 года назад

Donnie, I have the same saw as well. I noticed even with the vac hooked up, you eat a ton of saw dust, however I removed the gray flap behind the blade and now I barely ever eat saw dust.

@Пользователь-канала-м9м 3 года назад

Super 👍 Благодарю!

@shilohglasgow2343 2 года назад

Your work is really neat…I enjoy watching your videos

@JohnBuildsIt 2 года назад

Thank you!!

@-_-BenPrice 3 года назад

Your videos seem so approachable for a beginner like myself yet the finished product looks amazing

@JohnBuildsIt 3 года назад

Anyone can do it man! Thanks for watching!

@makermark67 3 года назад

Man John, that is a beautiful piece. Great craftsmanship. Thanks for sharing.

@JohnBuildsIt 3 года назад

Thanks Mark I appreciate it!

@cecilferris1163 3 года назад

Awesome build, it came out fantastic. I now have other options to use to start making some for my girls. Keep up the great work.

@JohnBuildsIt 3 года назад

Thanks man!

@Mohamed.Sweedy 2 года назад

Great job, beautiful dresser .. thanks for sharing

@JohnBuildsIt 2 года назад

Thank you!

@jimmyr4448 3 года назад

Man you do great work really in joy I'm making a farm house dresser keep up the great work 👍

@JohnBuildsIt 3 года назад

Thanks man, enjoy your build!

@scottallen606 3 года назад

Dang it! This looks too nice not to copy too. Great job and love the Rubio on white oak.

@JohnBuildsIt 3 года назад

Haha thanks man!

@edwardsimmons3721 2 года назад

Great looking project.

@dirtybaywoodshop-joeporter5650 3 года назад

John, this dresser is beautiful! I love it so much. The white oak and the Rubio look spectacular. I need to build two dressers very soon and I love the your style. That chamfer on the panels really gives it that subtle detail that I love. Awesome build, man! - Joe

@JohnBuildsIt 3 года назад

Thanks for watching joe I appreciate it!

@kmlanham1 3 года назад

Really nice work and finished product.

@JohnBuildsIt 3 года назад

Thanks Mike!

@mattbowers5342 3 года назад

Super good looking project John. I too love the Rubio mono coat finish. If you ever get a chance, to play with samples, check out one of the shades of white on the white oak. It looks awesome!

@JohnBuildsIt 3 года назад

Yea I’ll have to get some more colors!

@jackdahlhauser2194 2 года назад

How do I order plans?

@JohnBuildsIt 2 года назад

Link is in the description 👍🏽 or just johnbuildsit.com

@peckerwood3556 2 года назад

That was amazing dude nice job brother

@JohnBuildsIt 2 года назад

Thank you!!

@richardroy61 3 года назад

Just bought my plans. Off to buy the wood. Thank you.

@JohnBuildsIt 3 года назад

Awesome I appreciate it!!

@johnmurphy3880 3 года назад

Great build. A heirloom piece that will be in your family for generations.

@JohnBuildsIt 3 года назад

Thank you!!

@jakeelliott6507 2 месяца назад

Legit. Nice work

@JohnBuildsIt 2 месяца назад

Thank man!

@joeoliver9043 3 года назад

That is gorgeous! That white oak looks like it needs to be my next project wood!

@JohnBuildsIt 3 года назад

One of my favorite species!

@KnottenWood 3 года назад

Absolutely gorgeous! This is an heirloom piece for sure! Great job! As your baby grows, you can add new pieces. Love the style!

@JohnBuildsIt 3 года назад

Thank you!!

@jessehoffman1044 3 года назад

That's a really sharp looking dresser. Great work man!

@JohnBuildsIt 3 года назад

Thank you! 🙌🏼

@stevensonjuillet6835 2 года назад

How much for it?

@Whois2440 3 года назад

You truly are a craftsman. I hope that I get to your level again one day!

@JohnBuildsIt 3 года назад

I appreciate that man!

@meamscifi 3 года назад

nice! did you add anything under the feet of the legs?

@JohnBuildsIt 3 года назад

No I didn’t, thanks for watching!

@taylorhopson9740 3 года назад

Can't wait to see the crib!

@BandasPalette 3 года назад

Great build John. 👏

@JohnBuildsIt 3 года назад

Thank you!!

@vinceearl4240 3 года назад

Great work, and great video! Keep them coming!

@JohnBuildsIt 3 года назад

Thanks for watching!!

@mattdemorse8236 3 года назад

Where did the black hardware come from?

@JohnBuildsIt 3 года назад

Amazon. Link is in the description 👍🏽

@jjs811 3 года назад

Beautifully done! Thanks for sharing

@JohnBuildsIt 3 года назад

Thank you! 🙌🏼

@creativecomposites6193 3 года назад

Great idea using playing cards as spacers! very nice build.

@JohnBuildsIt 3 года назад

Works like a charm!

@LutherBuilds 3 года назад

Wow! That white oak looks amazing!

@JohnBuildsIt 3 года назад

iPhone video doesn’t even do it justice either! Haha

@markquinlan5992 3 года назад

Fabulous job John. Always look forward to seeing your videos. You are outstanding in your presentation and the content/teaching is one of the very best on YT for sure!

@markquinlan5992 3 года назад

More here John. Thank you so much for your time and effort putting out such great content. Again, you are so good at what you do and your sharing your process is greatly appreciated. Thanks again and God Bless.

@JohnBuildsIt 3 года назад

Thanks Mark I appreciate it!!