6 Meter Repeater Build - The Journey Continues! 

Good work fellow ham! Glad to see another ham video.... always checking your channel. 73 WD9M

I have setup many VHF/UHF repeaters in the past 25 years and I set the 1KHz via IFR-1200s at 10 uv @ 3KHz at a 150 mv level for all ports and set each ports for a repeater port first then you can set all three ports are the same AF level and with a VOM set the (COR active for given port number) tx af level adjust also at 150 mv. After normally set port 2 and 3 back to simplex mode while leaving port 1 as a repeater depending on your setup. I also set all radios on all port for flat audio input and set the de-emphasis jumper for all ports has they can be slight differences from one type of radio to another. 73, VE1BXK

Nice work. You may have to drop the power down to around 40 watts.

Nice work, but please buy a tripod and stop waving the camera about, it makes this almost unwatchable.

Woodworking and haming! 73 KE0CDU