60 Sketchup Tips and Tricks

Подписаться 26 тыс.

Просмотров 259 тыс.

50% 1

Get the Sketchup Style MegaPack here: sketchupstyle.gumroad.com/l/e...
Today I have a really special video for you. I’m going to show you 60 tips and tricks every Sketchup user should know about. As you can imagine, behind this short video there are hours of work and research, so I would really apreciate it, if you could at least click that like button. Keep in mind that all these tips are related to default Sketchup tools and that there are no plugins in this video. That’s because I’m actually working on a top 30 plugins for sketchup video, so be sure to subscribe if you don’t want to miss out on that content in the future.
Toolbar Editor
• Toolbar Editor, Laubwe...
Patreon Page here:
/ sketchupstyle
Thank you for watching and I’ll talk to you in the next one!!

Опубликовано:

23 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 124

@SketchupStyle Год назад

Get the Sketchup Style MegaPack here: sketchupstyle.gumroad.com/l/eanri You'll get every single Sketchup model featured on Sketchup Style RU-vid Channel

@Facadeghimire1302 4 месяца назад

"Your humor never fails to bring a smile to anyone face! Keep spreading joy with your content!"

@bjarnepro8327 Год назад

this was 3 years of my highschool carreer in 16mins... I should send this to my old teacher

@delinquense Год назад

Single best video on Sketchup ... You need to understand all of the 60 Tips and Tricks BEFORE starting any endeavour, like a course or a project. Bravo and so much needed!

@pesohernandez1091 9 месяцев назад

tip 18 has blown my mind, here i was trying to calculate spacing and do a copy and then move it to the correct space for creating slats on a table .. thank you!!!!!!!

@JD-mc3bl 5 месяцев назад

Just realised I had wasted years of my time by not knowing these simple, yet highly effective tips. Top quality video👌

@VibeXplorer 6 месяцев назад

Hands down the most useful Sketchup video I have seen yet. Delivered concisely. Learned a lot. Thanks!

@juergen-schanz Год назад

I have been working with sketchup for a few years now, and I know 50 of the 60 tips. But the remaining 10 tips are true timesavers. Thank you very much.

@eduk347 2 года назад

Keep up with the good work man! I've been using sketchup for 17 years and I just bumped into your channel and already found lots of useful information!

@trishensookraj6193 7 месяцев назад

This is an excellent refresher course

@kimberbearly7909 2 года назад

Knew all except one. Setting radius on a corner, Nice one.

@PaulineFerguson Год назад

Absolutely awesome! Thank you. I definitely learned some I hadn't seen before. Saving this video so I can watch again later!

@diegobenito1877 10 месяцев назад

I've been working with sketchup for a while and i found your video very useful! Thanks

@mpa-digitalarchitecture3210 2 года назад

Always something to learn: rounding corners has always been tricky for me, also two sidebars... gonna give that a shot ;)

@benwalters3825 Год назад

wow i never knew about new tray option, I would really like it if entity info was a tool bar that expands rather than tray item though....

@ahmadwael7612 2 года назад

amazing tips and a very useful video , your work is much appreciated !

@florinm9825 10 месяцев назад

I literally need two thumbs up to click for this video. It took me many many years to learn half of the tricks you list here. And - guess what - now I'm having two vertical trays on the edge of the screen. Bless you! :D

@SJLV123 Год назад

Great tips, learned a few. By accident I found also something useful. Suppose you have a number of identical components but then while working you realize that a bunch of them need to have the same changes . You can then select all the ones which have to be altered and right click Make Unique. All these selected objects will now be the same new component. Changes can now be applied to one of them.

@mipe7755 2 года назад

55. I didn't know, despite almost a decade spent with SketchUp! Finally, someone who knows SketchUp like his own house!

@oralevas59 Год назад

¡Guau! es impresionante la cantidad de información que nos has dado. Horas y horas de trabajo ahorrado aplicando tus enseñanzas. Gracias siempre.

@peterharms17 2 месяца назад

Incredible youtube vid!! When's your book coming out?

@Shimmernut Год назад

Fantastic :) Thank you so much! There was plenty to learn

@user-lb1yg9el2q 2 месяца назад

Thanks man! Wish you all the best

@juniperclary9233 10 месяцев назад

Wow, this was very helpful! Thank you!

@eidmarcodesign7853 Год назад

thank you and love all the tips

@benwalters3825 Год назад

off topic-2 mins in , do you model in perspective/ camera ? i cant deal with it !!! now ill watch rest of video ! cheers

@TheOriginalJake Год назад

v helpful time savers. thanks a bunch!!

@jennyhuang587 2 года назад

Thank you its really helpful

@indie3d 2 года назад

Very good tips thanks for sharing!

@dpv_2401 2 месяца назад

i feel like this was exactly what i needed, ty so much 😤

@thegamer9383 Год назад

Great work

@francoisbooyse8331 11 месяцев назад

Brilliant video. Thanks

@sahashik7452 Год назад

Great!! I didn't know many tips. Adding unit after number in Scale tool!!

@samuelkumbur2524 11 месяцев назад

Great

@nissebjorn9916 9 месяцев назад

Thanks for this video! Great job. Its helpful :)

@pedrorivera1892 2 года назад

Thank you for the video!

@paulazahan8550 3 месяца назад

Very useful! Thank you!

@user-jk9ug9wj4c Год назад

THANK U FOR THIS A BIG HELP❤❤❤

@ahmadnaufal9033 2 года назад

thanks sir, this video is enlightened me

@delrodesigns6735 2 года назад

wow this is so good! thumbs up for this

@masterrolly6278 10 месяцев назад

You are just the best. Thanks a lot sir

@evanqader1058 Год назад

Thank you so much it was very useful

@rocky8004 7 месяцев назад

Awesome teaching Sir

@vivekbhalala2506 9 месяцев назад

Great job 👍

@armandokeever9087 11 часов назад

Thank you very much friend, these tips are very useful, although I knew many of them, there are others that I didn't. I have a question, I hope you answer me: How do you zoom in and out so easily? I noticed that you can take a close-up of a specific area, for example a single section of the outliner or the preferences box. I know that using Windows Magnifier you can zoom in on the area where the pointer is, but that makes the entire screen larger, not just a singular area like you did. Thanks in advance Greetings.

@plasticonion 7 месяцев назад

A little fast but I probably only knew half of what you showed. So thanks a million

@shahara551 2 года назад

Tks for making video.

@raajvinay9751 Год назад

Keep working nice tricks have you teaching

@makhan1961 2 месяца назад

Excellent

@johanflodkvist80 7 месяцев назад

Amazing!

@yassineohd9096 10 месяцев назад

that s a really helpful video thanks a lot

@ana-marijamustac9930 Год назад

Odličan video :D

@madjedachour8097 2 месяца назад

thanks to you, please more lessons

@zansad878 Год назад

Super tips...awesome..

@benwalters3825 Год назад

great video well done !,,,, some comments 1) tip 42 -45 should be top 10 tips , 2) re tip 31 and 47 , i don't like the changes SketchUp has made with hidden edges and calling layers tabs . 3) re tip 16 - I use copy paste in place when moving item into different group or component - (perhaps i should use outliner,?) i would prefer if copy paste in place were accessed my context menu. 4) i did not know you could have 2 trays ! 5) i did not know at least these 9,33, 23,24,37,40, thanks !!!!!!!

@085_abhishekraut8 2 года назад

Very Informative

@Psycho_synthesis2 5 месяцев назад

You are amazing.

@jskup Год назад

thanks, great and fast!

@ireneuszkuropatwa8356 2 года назад

it is the fastest sketchup course ever. You can literally learn sketchup from this video and start to model :D

@DF-te2vm 2 года назад

Super cool

@ogalabenjaminarome5714 2 года назад

Good tips. Next I want to know is the hidden default tray that pops out whenever you move your cursor on it

@artirana2751 Год назад

GOOD ONE MAN

@AhmedSElShorbagy Год назад

amazing thank u so much

@ganubuilders 7 месяцев назад

Perfect 👌

@ricardoposada211 Год назад

Que buenos trucos ... mil gracias

@antonblam2 2 года назад

I consider myself a pro SketchUp user and 23 and 32 blew my mind 🤯

@jaimecolodro1588 Год назад

good work

@elnisdjcheco Год назад

Thank you

@binabbas2000 10 месяцев назад

Great! .. Thanks a lot.

@YSNDDN Год назад

God bless you !

@anti_gravity8446 Год назад

Subbed!!!

@vishnusamy2338 2 года назад

Hi very useful and timesaving tips. Keep rocking. Hats off to you.

@jayvaddoriya2732 8 месяцев назад

Nice bro...

@AnNguyen-om2ns 11 месяцев назад

cold

@user-se3hs2xt7t 9 месяцев назад

good job

@RoiDiola 8 месяцев назад

14, 15, 16, 17, 18, 21, 22, 23, 31, 32

@mdganiulhakimtanvir3215 Год назад

Thanks

@besogogebashvili8212 2 года назад

@SebyIanasiFoto-Video 10 месяцев назад

thankkkkkk youuuuu god bless youuuuuuu thank u thank u thank u so much

@1440dvsone 2 года назад

My favorite one you didn’t mention is that you don’t have to scroll through your scenes layers components etc. you can have them as tabs if you get rid of the default toolbar and make your own they nest as Tabs which is much easier than scrolling up and down with the menus on the right

@Skans-Gustav 2 года назад

32 and 33 where great:)

@tricky2k 2 года назад

Very good tips. I know them all but because I've been using SU for many years, but this is a goldmine for newbies and not so newbies. I miss a good one, though. Ctrl-Eraser softens the edge. Shift-Eraser hides it. So far so good. Aaaaand, Ctrl-Shift-Eraser "unsoftens" (hardens?) soft/smooth edges

@SketchupStyle 2 года назад

Wow, great one. Thanks. I'll pin your comment

@tricky2k 2 года назад

@@SketchupStyle Thank you. Then you might like also this one. It's easier to do than to explain and maybe (probably) you already know it. You can rotate anything in respect to any edge. Usually you use a face to infer the orientation, but you may not have one matching what you want to do, but instead there's an edge there in the right orientation. Select the rotate tool, click on the edge and, without unclicking, move the cursor along that edge. The protractor will be oriented perpendicular to the edge. Then you can unclick and rotate as desired

@SketchupStyle 2 года назад

No, I can't say I knew about this one. Thank you

@pinkrocksnovi 9 месяцев назад

Thanks for a very good presentation👍 Buy the way, are you from Croatia?

@SketchupStyle 9 месяцев назад

Thanks, and yes, I'm Croatian

@noraelassaad3277 Год назад

genius

@AnNguyen-om2ns 11 месяцев назад

cool

@alexjp4131 2 года назад

👌👍

@studioanakamak446 2 года назад

thank you, the video is very useful, I hope my channel can grow,

@FranCarreira Год назад

Oh, how i wished i knew the 23rd before... Lots of times I used the calculator to get close to the percentage I needed to get the measure i wanted... (but that´s not the only useful tip on this video, althoug I have been using sketchup for 16 years now.)

@forceclosee 4 месяца назад

Are there any tricks to make components have more than 1 tag for example, 1 wants to show a component in Scene 1 and Scene 2 and hide it in Scene 3 or should I manually make 3 duplicate component

@maximumselfish 2 года назад

Not a single trick I don't know) I'm cool. Thank you)

@SketchupStyle 2 года назад

Wow! Respect! ;)

@maximumselfish 2 года назад

@@SketchupStyle THNKS! Let's get 60 or more tips for LayOut!.. That would be a really helpful video.

@SketchupStyle 2 года назад

Sorry friend,I don't use Layout AT ALL. I'm sure you already know more than me on that subject 😉

@kimberbearly7909 2 года назад

Same here

@secession77 Год назад

13:19 - 48 - does it support changes in texturing as well?

@viisteist1363 2 года назад

is there any stress calculation apps for this ketchup?

@hetashvibhagat4865 3 месяца назад

For Trick No 14. I am not able to enter Inches and feet while the default Unit is mm. Will the trick only work for m and cm?

@Thilinaliyanagevraysketchup 2 года назад

good one..you forgot "cloth work" plugin

@kusumaswetha9509 6 месяцев назад

what command is used to get trimble scan essentials toolbar in sketchup pro

@dezairestudio 9 месяцев назад

thanks for making this. The majority of tips is derived from simply reading the command prompt line. 90% is there. So my tip zero is: people read this line!