7/11 Dropped Silverado 

You can do whatever you want to your stuff

If tires are too big you’ll rub on the inner fender. This truck had the inner fenders cut out and fuse box relocated

@@CGOD Ohh I really appreciate it bro, I might have to get some thinner tires and hopefully be able to run 22s with the 8in drop and relocate the fuse box, if not I might just have to go with 20s

@@chrisluvsu 22’s on 265/35 should still work, it’s just the bigger wheels and tires that’ll be your problem but truck will sit real low to the ground

@@CGOD I have 265/35 rn hopefully it does fit and is the relocation with the fuse box hard to do? and how much did you end up cutting the fender? like a good amount or most of the front fender? also really appreciate you for responding man 🙌🏼

@@chrisluvsu relocating it isn’t too hard, usually the entire inner fender is cut out. You could take it a step further and tub the fenders then it’s possible to just lay the fuse box on top

This truck had the tubs cut out and some stuff relocated under the hood to not rub

Thomas Hoang thanks man! Yeah, it could use a notch cover lol

2wd

05 P71 I’ve always been into cars too, had a family and needed shit moved. Had to get a truck lol

@@CGOD That's my next step lol. We decided to buy a house before another vehicle. Looking to get one by the beginning of next year. I've had my car for 7 years, that hooptie ain't going nowhere.

I had to buy a truck to move all my shit to my house lmao

Coronitas thanks bro! We try

i dont have a link but its the only cowl hood available for 03-04 silverado

Like a walkthrough I guess please ?

It’s my brothers truck but pretty much he drilled holes in the bed floor to be able to extend the wires and fuel lines and hooked the tank up like normal

Jaime Barrera yeah it has shock extenders with small shocks, we wanna do custom shock mounts on it eventually

Sorry for the late reply but this truck had the crossmember notched to clear the driveshaft with no issues

sadam bomb I think he’s running a shim in the back for pinion angle but I’m not for sure

Ku ku bro thanks !

joshua6200 what can I say, he’s a wild boi

I ain't a big fan of the extended cab's, but that mfr looks good sitting like that🤘🏽

Ruben Aguilar they’re 24” Yukon replicas

It’s on 6” flip kit, 2” shackles, and 3” drop blocks

Dpmode TapiaBeltran haha we from Kansas bro!

😂😂😂 definately not Cali😎😎 nice truck tho

Content is a little slow but I plan on making new videos weekly eventually lol need to start working on my truck again

9.1M views is a 5.3 the best motor to get on these trucks?

1slo_ext _ no issues so far, we just used gas line to extend those and the same size wire to extend the wiring

CGOD thanks for replyin bro !

Did you just have to buy more of the same plastic line and what fittings do u buy mines 8 in rear right now but need to move the tank to go another 2

We just extended the original lines so we used the same fittings. Just used fuel hose and hose clamps to extend them

@@CGOD ok cool so just use rubber house and i guess brass barb fittings and clamps

Erick Medina it’s running an SLP loudmouth

@@CGOD stupid af

This truck being a step side the bed has no wheel tubs inside. Your wheels might be the issue though. 10” wide will barely fit and rub sometimes. Narrower wheels will clear easier. But yes if anything is rubbing you can remove it or cut out your wheel tubs inside the bed if you have a fleetside

rmartinezg93 does it really matter? We had to adjust the toe anyways after lowering the truck more. Original tie rod placement would’ve been changed anyways

You’ll have to get relocated sway bar links for it to work properly

Where can i get those at?

@@Joshsotojustss I’m not for sure, my brother said he used stock links and didn’t have any issues

@@CGODthanks bro for replying your gto is sick asf too

Crippin’ 4 LYFE idk man, I’ve heard of people running one drop shackle at 2” and the other at 1” to even it out also. Or a stock shackle and a 1” drop shackle

Just get a leaf spring lift shackle for the low side

I have the djm lift shackle brings it up 1in

My brother ordered it, I’m not for sure from where

random saulo_vlogs it originally came with a 2 piece driveshaft, we did have to notch one of the crossmembers for it to clear.

The bedsides were shaved on this one to clear.

@@CGOD I shaved mine too but they’re still touching

@@zenah7248 I’ve seen some people extended the bedside mounts to kind of “widebody” it and clear. This truck had a plastic bed cause it was stepside

@@CGOD yea mines stepside too, hm i’ll see

@@zenah7248 fack, best option is to narrow the differential

Angel Zavala usually try not to take it over speed bumps

Zavier Cope yeah man it’s just a steel cowl hood for 03-05 Silverado

@@CGOD ok thanks bro

Nathan Ogliastri cowl hood for 03-05 Silverado

They’re Tahoe replicas

Miguel I think they’re installed with screws

Saul Solis it’s an 03

Drizzylsd definitely not OSHA approved!

Pablo Hernandez we in Garden City, KS

CGOD let’s link bro I got a 08 ram

Pablo Hernandez my truck is still a work in progress, my bro would be down to cruise probably. I just got my Lincoln right now

Juan Colunga just a billet antenna off eBay bro www.ebay.com/itm/Chrome-Billet-8-High-Gain-Radio-Antenna-Ford-Chevy-GMC-RAM-Truck-RECON/172281232465?epid=2205191801&hash=item281cc2fc51:g:dzMAAOSwgotcQfuS

MOPAR_LSX _SVT_JDM for this one we just cut out what we could without relocating anything. Clearance is minimal

J owens thanks for the love!

The rear fenders on stepsides are plastic, we used a sanding disk on a grinder to remove the lip so the wheels don’t rub

@@CGOD yeah I got a regular bed and it has a metal lip thats shredding my tire. Trying to figure out best way to fix this issue

I would say narrow your differential, if not then you can shave the metal off with a sanding disk aswell. Some people say it makes it flimsy but atleast it would clear

@@CGOD yeah thats why I haven't grinded it down I heard the same about it making it flimsy. I might try the baseball bat trick lol. Until I can get smaller tires and 9" wide wheels. My current set up is 22x9.5 wheels with 305/40 tires. Shits to wide

I wouldn’t roll it with a bat cause it’ll make the bedsides look wavy, I would shave it and leave a little material so it stays strong

Jorge Lozano it’s on 2” lowering spindles and the springs are cut quite a bit. No camber adjustment yet

@@CGOD thats crazy i lowered mine to 6 and had insane camber

This one has some camber but it’s not too noticeable. Helps with turning and since we aligned the toe it shouldn’t wear the tires too fast

@@CGOD how does it ride with the cut springs? I'm thinking of cutting my djm springs to get another 2" drop

It rides pretty good, the DJM springs would be better I’d say

Jorge Lozano we just used fuel lines and hose clamped them to the original lines

the lazy boy this is 275/30/24 all around

@@CGOD thank you

Hell yeah man!