I've had this sander for 4 years. It works flawlessly. Only brand I am aware of to offer a variety of pads with various densities for different sanding operations as well as a vacuum attachment. Best value sander on the market.
I agree. Granted I just bought and used this today, BUT I used 36 grit on some 2x10's I'm turning into a custom desk. I used 36 grit for the glue joints between the boards and it worked great without pressure. Got the edges of the boards flat(5ft length) in a minute each overall. And I am tickled with the dust collection! ALSO, the vibration is damn near nonexistent.
"I have the same sander and it's strictly a finishing sander (120 - 320 grit) which helps the hook and loop last longer which I agree is a little weak. But these are not meant for a lot of material removal"
This seems like a good sander for wood finishing and general use. They definitely make sanders for heavier work like what you were using it for. I was mostly interested in its dust collecting ability and hand fatigue. You covered the dust collecting so that's good. And if you didn't mention hand fatigue then it must not be an issue. So this sounds like a good sander to me.
I totally agree w your comment. I was most interested in the dust collection.... I need one that I'm not going to be eating dust lmao....Looks like is a good option for now... 😉😁
The lowest speeds are for the most delicate sanding such as sanding between coats when you want to remove the least amount and at 2.5A it's on the lower end of power but this sander is designed for lighter types of sanding and not heavy sanding. The problem with lower power sanders is most people press down harder to force sander to remove more which causes excess heat to build up which results in the hooks to melt and curl. When this happens the hooks break and loose the hook holding ability and this is noticed when sandpaper flies off when started.
Dude, came here to know if I should returned my unopened one and you end up giving me reasons to keep it. The cons don't worry me that much, and the pros are exactly the reason i bought it. This is a great video, your strong opinions are laid out in a way i can make a concious decision about them instead of just saying "yep, its shit, dont buy it"
When you're polishing metal (especially thin aluminum like on an Airsteam trailer) it needs to be at a much lower speed than sanding. You bought a specialty power tool and were expecting it to be more of a brute force type of power tool. Unfortunately, your review is misleading people because you didn't know enough about the product and didn't do the research before publishing your opinions. Maybe do an updated video where you use the tool for what it was intended for.
11:58 Speed 1 & 2 are perfect for waxing/buffing the car or any smooth surface with buffing attachments. Thanks for your honest review, made me decide I'm getting this particular model. This is a perfect tool for any small DIY projects. The cons are definitely not a problem. I hope Bosch sends you lots of gifts for this video, you're absolutely good at selling their products. 😘
I bought this model sander from Amazon for like $55 last year and absolutely love it. For sanding I use 3M 710W and 775L paper in various grits, and have never had a problem with stock removal. I would say getting a couple of backup pads or pad savers is a smart investment, they have the same size/hole pattern pads for like 2 for $6, and they work wonders for preserving your actual sanding pad. Im on my 2nd pad since i bought it, but now use a pad saver everytime i touch the sander, so I dont anticipate having to change this pad again for years. The last couple months I've used it more for paint correction / detailing my car, using Meguiars Ultimate Compoud with a medium foam buffing pad on speed 5 does amazing work on any scratches/scuffs/imperfections. Follow up with 210 polish / sealant / wax and the car looks as good as any car I've ever seen before. Love this sander.
Holy crp, u put on wayyy too much pressure on the sander!! I got the same orbital sander. And not pushing but letting the bosch do the work itself, makes it very useful. Besides that, the right sandpaper fixes a lot of ur issues aswell ;).
Dude, just saw your video, I have the same sander and it's strictly a finishing sander (120 - 320 grit) which helps the hook and loop last longer which I agree is a little weak. But these are not meant for a lot of material removal so sort of asking a razor to cut trees down. On the other hand I also have Bosch's 3.3 amp and 6 amp sanders and you can stand on them and they won't stop. Obviously they're heavier and require more attention but vibration control is excellent, great dust collection and meant for serious material removal, try one out. Nice video!
Thanks for the feedback! Yes, you are completely correct. I think it should be marketed as a finishing sander....I think that would be more helpful. I'll have to get one of those more heavy duty sanders like you are talking about. Cheers!
Are those 3.3amp sanders still true random orbit sanders? Electric, battery, pneumatic? I've been tearing my hair out trying to figure out if the tool is wrong or if I'm using it wrong. On my second Bosch in 2 days, 3rd overall. First was a Dewalt. Dewalt pad literally wouldn't spin just holding the sander in the air. Motor spun just fine. Bosch would spin, but even very slight pressure was enough to stall the pad. Again, motor was spinning away, just the pad would stop. And on its lower/lowest settings I could easy stall the pad *and* motor with a single finger pushing on the pad. Is there a true random orbital sander that can be used for both finish work and heavy pressure/material removal?
Yes, they're random orbit sanders and they are corded, not sure the size of the stroke on the orbit but I bought them as I couldn't justify Festool's price and have sanded everything from pine to hickory with great results. Now occasionally I will replace a pad as they do lose their grip over time but most orbitals with heavy usage will wear them out as pads are considered a consumable. Try model ROS65VC-5 which is a 5" machine, they also make a 6". I use 3M's cubitron discs which really bite and no worries., hope this helps.
@@jgemeinhardt3955 Thanks 👍. I'm going to be doing some pretty intensive sanding on a fiberglass boat and I just don't think this 2.5amp bosch has near enough balls. I'm gonna keep it for when I do drywall repair though. Nice to have that super duper filter to help with dust.
I feel you pain! I would look into the new corded ROS from 3M. They just came out with it and is available at limited retailers. Stumpy nubs did a review on it and I think it could be the best one around.
Any experienced wood worker knows if you want to sand rough lumber, a belt sander quickly removes the rough areas to allow a finish sander to come in and do what it does best. Rookies...............
If the hook and loop wear out you don’t need to buy a new pad, just gently sand the existing hook and loop smooth and replace it with aftermarket self stick materiel. I use my sander a great deal and in 20 years I’m on my third pad but 10th hook and loop. Replacing it takes about 10 minutes and the aftermarket stuff grips the paper better and far outlasts the OEM material. You do need to be a bit more careful when replacing the paper to avoid peeling off the replacement H&L.
I’ve had mine less than 6 months and wore through the sanding pad - yes, probably was pressing too hard although that never was a problem with my old orbital. Got a replacement pad and was very careful with it yet I can tell it is already wearing out too.
I'm leaning on the on the worthless side. I purchased this same sander because it said Bosch. After two of those pads went out quickly and it developed a bad vibration, I put the sander in the garbage. Wasteful, yes. But it made me feel so much better.
Not the best review methodology I’ve ever heard. While I do appreciate your attempt to convey your findings, the parameters of that class of ROS are all fairly similar. I have the Bosch unit too but I didn’t get the variable speed model, it seemed a bit pointless. While the stroke rate is similar to other brands in this class, the sander is a bit more delicate but that’s why I like it, essentially for the reasons you gave as pros. My PorterCable is a bit more aggressive so I use that on SPF for rougher but narrow stock. It’s also harder to grip with the vibration and taller to hold ergonomically but works out if you like to grip it lower with your hand like a strangle hold. My variable speed Milwaukee was very aggressive but jumped all over the place and the pad wore out way too quick. My Makita seemed perfect in many ways but the cloth dust collection bag was terrible and the pad wore out too. The best small ROS I’ve ever owned was the DeWalt unit that seemed to have a perfect profile in every way. I currently use a Bosch GET75-6N for all my aggressive sanding and my Bosch ROS10 5” in single speed. The ergonomic grip is ideal, there’s no variable speed to fail, it’s for light duty so not hard pressing in use to ruin the pad, and it’s cheap. I don’t like the dust collection hard plastic as it breaks easily. So you are correct in that these small Bosch ROS units might not be the best all around sanders. But, there are better models in the Bosch ROS lineup. Yeap, more money and way better performance without going to a Bosch imitation Rotex. Thanks again for the review. I’ve been as honest as I can.
Your insight is well thought out and I appreciate it very much. You’d think by now I would have bought a new ROS but I’ve had to strictly prioritize buying what tools I don’t have rather than what I want to replace. Having said that the 3M ROS looks good as well as the festool. But I might go with the Dewalt before I splurge on all the expensive stuff. Thanks for watching!
Welcome to the fold! I'm glad I could be of service. Come back often and watch more videos. I'm always working on something that will eventually be posted on my channel. Cheers!
Are they supposed to have a little wobble to them? I bought this exact one and it wobbled out of the box so I returned it, and got the same one. It started wobbling after an hour. I’m not putting added pressure or anything while sanding.
Good review, in my opinion. I suspected it was not powerful enough, these things needs to be powerful because they is are really for fine sanding. The information about the discs wear out was also important. Maybe its possible to by a good one from, for example, 3M, if they fit.
So great finish, lightweight, great dust collection, hood cord length but just not enough power because u didn’t know at time of purchase how much power u needed??? And u give a 2 thumbs down? Dude the only cons where caused by you so why fault the machine. Should have given 2 thumbs up but need more power for what your using a sander for per your words on ur review. I think that was an unfair opinion and could stray a newbie ( I love mine and it’s perfect for women with small hands and has very little vibration and little fatigue even with my arthritis) away from this very awesome sander. If your needing something for huge projects and daily use of corse go with something with more power but come on it’s a great sander for the diy person or even for small projects.
You pose a strong argument that is solid. This sander definitely has some strong points and for someone like you it is probably awesome. I appreciate your feeback and am glad you gave my video a chance! Happy Building!
Thanks for the encouragement. I've noticed your channel seems to really be advancing lately. I'm so jealous, but it also give me hope that things can take off for me. I noticed your branding is solid and consistent. That's one thing I could do better with. I started doing a little bit more with Canva but I need to take the plunge and get the paid version.
@@DudeSawdust wow thanks I appreciate that a lot! Yeah Canva is definitely worth the buy each month especially if you want to grow a brand name for yourself. Keep up the great work! Your videos will soon payoff!
Hey also, I just noticed something. If you don’t mind a little feedback to help you with your videos. I really really like the thumbnails that you first made on your channel. Videos 2,3 and 4. Make thumb nails like that again! Thumbnails are one of the most important things to do because that’s what people see first. If you make thumbnails like that I bet you will find yourself getting more traction. Just a thought!
Feedback is key, thanks. I’ve been just trying different things just to see what works. I’ll definitely think about your advice. The common thing about those thumbnails is that the French cleat wall is in the background. My thought process was I didn’t want to overdo the French cleat thing. I also focused on using black and yellow colors. I guess I got away from that. So much to think about 🤔
I spoke with a friend and he has the dewalt. When I told him about my Bosch he was shocked and said his dewalt was great. I’ll probably be getting a dewalt since they have never disappointed me.
@@DudeSawdust Good to know. Funny as it may seem I have the black and decker and that thing is a banshee. 1 speed and it sands like no other. Hopefully Lowes will let me plug them in to compare. This will be my second sander return to them
Good luck! FYI, if I don’t get the dewalt then I’d probably just splurge and get a Festool. My buddy @eigendesigns did a review on it and he has me sold. But it ain’t cheap!
I assume its an old deck that you want to resurface. I would get a hand held belt sander. Budget price? That's a tough question. If it is a deck then it is likely a big project. If it's a big project then I have learned that I can't trust cheap. But Ryobi does have a 6 amp 3 inch corded belt sander at Home Depot for like 65$ that would probably be fine. I think that is going to be your best bet for a cheap price. Otherwise, I trust Ridged as a comparable next step up 6.5 amp 3 inch. It's probably more reliable. I would just avoid harbor freight for a job like this. Happy Sanding!
I found your vid cause I was in the market for a ROS and actually settled on the one you're reviewing for my use case. Did some more research, and as you asked for a reco, it seems the sander you needed is the 65-series version of the Bosch sander or another brand in that class. The use cases you described here sounded fairly demanding. The 20 is strictly a finishing sander (hence the 2.5A). Also, apparently the lower speed settings not functional is the norm when too much pressure is applied (please dont yell at me). Anyways, here's a decent video comparing sander types, and keep up the good work: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uBSOan7D1Ow.html
You are right and make some great points. I'll eventually be purchasing a stronger sander. As far as pressure applied with the lower speeds....In the video demo I was applying zero pressure. It basically just vibrates on the lower settings, it really does nothing productive. On the other hand it does have some good qualities. I agree, if you only want it for finishing then it will do a great job providing a smooth surface. I would argue that Bosch should call it a finishing sander on the box. If you don't like my yelling then you should check out my most recent video where I build a drill charging station...my intro has some quality yelling you should watch and and find off putting! :)
I haven't formed an opinion to that question yet. But if you are in the market for something nice I would probably look into this one: amzn.to/3A2STwb But if you're not interested in breaking the bank then I would probably get something more economical like this one: amzn.to/3xnRheJ People have told my that Dewalt is really good and I have never bought a Dewalt product that I was unhappy with. I'd love to know what you settle on. I'm not ready to buy another sander since I decided to save my money for some other tools first. I'll just use my Bosch 2.5 amp ROS in the meantime. But the day will come when I get something real nice!
@@DudeSawdust the Bosch GET-75 is an absolute beast. I own one and would compare it to the Festool Rotex which I had in loan for about a month but half the price.
Thumbs down for a review for not knowing why one would use an orbital sander in the first place. It's a finishing sander so why would you use it on rough lumber. Also, the lower speeds are for other processes, not necesssarily sanding. As another commenter said below (above?), they use it for lime scale, presumably on tile.
I know right!?!?!? Actually I have a Dewalt angle grinder still sitting in the box that I bought for another project but didn't end up using it due to an audible. I'll have to showcase it someday. Thanks for watching!
Rubber grips are great.....until they age and deteriorate and they feel nasty!! Anyone who ever had tools with that rubber on them knows all too well how crappy that stuff gets with age and it is disgusting!