7 segment display| Tinkercad circuit| Project 2| 

This is exactly what I needed. Thank you for the video

Thank you for this video, now I know how to do this project.

it was very helpful thank you so much

this is a code use in this project int dp = 0; int a = 1; int b = 2; int c = 3; int d = 4; int e = 5; int f = 6; int g = 7; void setup() { pinMode(dp, OUTPUT); pinMode(a, OUTPUT); pinMode(b, OUTPUT); pinMode(c, OUTPUT); pinMode(d, OUTPUT); pinMode(e, OUTPUT); pinMode(f, OUTPUT); pinMode(g, OUTPUT); } void loop() { // 0 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, HIGH); digitalWrite(e, HIGH); digitalWrite(f, HIGH); digitalWrite(g, LOW); // 1 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, LOW); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, LOW); digitalWrite(e, LOW); digitalWrite(f, LOW); digitalWrite(g, LOW); // 2 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, HIGH); digitalWrite(c, LOW); digitalWrite(d, HIGH); digitalWrite(e, HIGH); digitalWrite(f, LOW); digitalWrite(g, HIGH); // 3 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, HIGH); digitalWrite(e, LOW); digitalWrite(f, LOW); digitalWrite(g, HIGH); // 4 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, LOW); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, LOW); digitalWrite(e, LOW); digitalWrite(f, HIGH); digitalWrite(g, HIGH); // 5 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, LOW); digitalWrite(c, HIGH); digitalWrite(d, HIGH); digitalWrite(e, LOW); digitalWrite(f, HIGH); digitalWrite(g, HIGH); // 6 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, LOW); digitalWrite(c, HIGH); digitalWrite(d, HIGH); digitalWrite(e, HIGH); digitalWrite(f, HIGH); digitalWrite(g, HIGH); // 7 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, LOW); digitalWrite(e, LOW); digitalWrite(f, LOW); digitalWrite(g, LOW); // 8 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, HIGH); digitalWrite(e, HIGH); digitalWrite(f, HIGH); digitalWrite(g, LOW); // 9 delay(2000); // Wait for 2000 millisecond(s) digitalWrite(dp, HIGH); digitalWrite(a, HIGH); digitalWrite(b, HIGH); digitalWrite(c, HIGH); digitalWrite(d, HIGH); digitalWrite(e, LOW); digitalWrite(f, HIGH); digitalWrite(g, HIGH); }

Thank you sir. Have a great day

U guys are the best👍

Thanks. for my case, i need to change the connection of "common pin" to 5V instead of GND. Then, change all HIGH coding to LOW. As well all LOW coding to HIGH. And it works from there.

thx this helps me a lot for my test

Thank you so much

here is the code:) int dp = 0; int a = 1; int b = 2; int c = 3; int d = 4; int e = 5; int f = 6; int g = 7; void setup() { pinMode(dp,OUTPUT); pinMode(a,OUTPUT); pinMode(b,OUTPUT); pinMode(c,OUTPUT); pinMode(d,OUTPUT); pinMode(e,OUTPUT); pinMode(f,OUTPUT); pinMode(g,OUTPUT); } void loop() { digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,HIGH); digitalWrite(e,HIGH); digitalWrite(f,HIGH); digitalWrite(g,LOW); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,LOW); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,LOW); digitalWrite(e,LOW); digitalWrite(f,LOW); digitalWrite(g,LOW); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,HIGH); digitalWrite(c,LOW); digitalWrite(d,HIGH); digitalWrite(e,HIGH); digitalWrite(f,LOW); digitalWrite(g,HIGH); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,HIGH); digitalWrite(e,LOW); digitalWrite(f,LOW); digitalWrite(g,HIGH); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,LOW); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,LOW); digitalWrite(e,LOW); digitalWrite(f,HIGH); digitalWrite(g,HIGH); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,LOW); digitalWrite(c,HIGH); digitalWrite(d,HIGH); digitalWrite(e,LOW); digitalWrite(f,HIGH); digitalWrite(g,HIGH); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,LOW); digitalWrite(c,HIGH); digitalWrite(d,HIGH); digitalWrite(e,HIGH); digitalWrite(f,HIGH); digitalWrite(g,HIGH); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,LOW); digitalWrite(e,LOW); digitalWrite(f,LOW); digitalWrite(g,LOW); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,HIGH); digitalWrite(e,HIGH); digitalWrite(f,HIGH); digitalWrite(g,HIGH); delay(2000); digitalWrite(dp,HIGH); digitalWrite(a,HIGH); digitalWrite(b,HIGH); digitalWrite(c,HIGH); digitalWrite(d,HIGH); digitalWrite(e,LOW); digitalWrite(f,HIGH); digitalWrite(g,HIGH); delay(2000); }

For common cathode 7 Segment Display Connection are:- DP=0 A=1 B=2 C=3 D=4 E=5 F=6 G=7 Code is:- void setup() { pinMode(1, OUTPUT); pinMode(2, OUTPUT); pinMode(3, OUTPUT); pinMode(4, OUTPUT); pinMode(5, OUTPUT); pinMode(6, OUTPUT); pinMode(7, OUTPUT); } void loop() { // 0 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, HIGH); digitalWrite(5, HIGH); digitalWrite(6, HIGH); digitalWrite(7, LOW); // 1 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, LOW); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, LOW); digitalWrite(5, LOW); digitalWrite(6, LOW); digitalWrite(7, LOW); // 2 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, HIGH); digitalWrite(3, LOW); digitalWrite(4, HIGH); digitalWrite(5, HIGH); digitalWrite(6, LOW); digitalWrite(7, HIGH); // 3 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, HIGH); digitalWrite(5, LOW); digitalWrite(6, LOW); digitalWrite(7, HIGH); // 4 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, LOW); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, LOW); digitalWrite(5, LOW); digitalWrite(6, HIGH); digitalWrite(7, HIGH); // 5 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, LOW); digitalWrite(3, HIGH); digitalWrite(4, HIGH); digitalWrite(5, LOW); digitalWrite(6, HIGH); digitalWrite(7, HIGH); // 6 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, LOW); digitalWrite(3, HIGH); digitalWrite(4, HIGH); digitalWrite(5, HIGH); digitalWrite(6, HIGH); digitalWrite(7, HIGH); // 7 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, LOW); digitalWrite(5, LOW); digitalWrite(6, LOW); digitalWrite(7, LOW); // 8 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, HIGH); digitalWrite(5, HIGH); digitalWrite(6, HIGH); digitalWrite(7, HIGH); // 9 delay(1000); // Wait for 1000 millisecond(s) digitalWrite(1, HIGH); digitalWrite(2, HIGH); digitalWrite(3, HIGH); digitalWrite(4, HIGH); digitalWrite(5, LOW); digitalWrite(6, HIGH); digitalWrite(7, HIGH); }

Nice video..👍

Ehh its hard to write code so can u do video same like this but with blocks pls😶

why nobady can put the code as a txt data belowe :( but thx for the help

HOW Count Up to Count down (0 to 9, 9 to 0)

where is the code

need the text/code

Whtas the code?

can you share the codes

mine exploded

I got a issue with code. Can anyone help.