7 things you want from your 3d pen work surface 

Glad it was helpful! Surface can really make or brake a project. Lot of people who are having trouble think is their lack of skill or problem with the pen but then are totally fine once they find the right surface. The bridging in this video : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mhAFPLDeVL0.html is a good example of how the same person and the same pen can either do it or not on different surfaces.

Thanks. The wrong surface can completely sabotage your project which most beginners don't realize. I thought this will save some people a bunch of frustration. Also see this one: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QP7YsXWvb8M.html

Glad it was helpful! There is a sequel to that video called "Best work surface for 3d pen" ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QP7YsXWvb8M.html where I talk more about the surface I use the most. It all got too long so I had to split it into 2 videos. Have fun.

@@3DPENDEN Thank you! I'm a subscriber now. Your videos and 3d skills are impressive.

Thanks.

I know. I almost gave up after my first session with my pen because of the surface. Not having a clue why I can't make anything.

That is awesome! Watch the one I posted today. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xa7gZse6c5c.html I am starting on a series of animals (lizard, frog, teddy bear). That could get her excited. How old is she?

Glad you think so!

Glad it was helpful!

I am glad. That is the idea.

That's interesting. I never had that happen to the plexi (except once when I used it with 3d doodler because that has a metal nozzle and takes a bit to start it. So if I rested that on the surface the metal nozzle would make a dent). But I never melted into the plexi with the Mynt. Could there be different types of plexi? It does take a spatula or palette knife to release it. But once you get underneath it it usually just pops right off without any damage to the plexi.

Also it has to cool down first. It doesn't release too happily if it's still warm.

@@3DPENDEN Long time for a reply but someone left a couple of sheets of 3/8 inch poly by our dumpster. Was able to cut, burn and chisel a 14X14 piece with only one crack. 3 coats of the acrylic matte and PLA at 175 did not melt the poly. However, maybe another coat or 2 of matte to see if it releases better. I might try combining your Play-Doh idea for areas with long, thin lines.

I am glad it helps. :)

Fair enough! I just wanted the people who know nothing about it to understand the issues you can encounter.

Not sure what pre frosted plexiglass actually is. I always sprayed my own. Have you watched this one? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QP7YsXWvb8M.html

@@3DPENDEN I was wondering if it came pre frosted? Would it be possible to use sandpaper on them to give that texture? (The spray is an expensive fare)

@@SeeDaRipper... I get your thinking: if you scratch it with a sandpaper it would stick better. However the problem here is that it actually already sticks too well to plexi. So the spray is there to insulate it a bit. If you draw on raw plexi it will stick so well you won't be able to get it off. In fact even with the spray it's a bit hard to take it off (let it cool completely and use some thin spatula tool to peel it off). So I think if you sand it it would just stick even more permanently to all the grooves you just created. And if it comes prefrosted I am not sure how they got it that way - if it's pure plexi just manufactured rough it may still stick like hell. The good news is you don't have to spray it every time you use it just once every few month so one can of spray will last you forever. And it's on sale right now. :) amzn.to/405xXlA

@@3DPENDEN Thanks for the link, but i'm based in the UK. To be fair i think the sanding of it would be true as there is less area for the PLA/ABS to stick too. I'm going to experiment as it's no difference than using a spray methinks.

@@SeeDaRipper... Testing stuff is always the best way to go. That's how things get discovered. Drop me a note how it went. I am curious. :)

It's a transparency film for overhead projectors. Mine says "write on" and it's the Office Max brand. The picture of the box is around the 9:12 mark in the video. They come also in inkjet and laser printer versions. But the "write on" works and it's the least expensive. I am not sure if they all work the same and also if there is any difference between different brands. So test briefly before you do anything time consuming. Good luck.

I did. I find the clear acrylic coating lasts longer and works better for me. It may also depend on the type of hairspray.

May make a good video "Hair spray vs. Acrylic coating"

@@3DPENDEN kool i would watch it

:)