70 Years Old Guitar Restoration, no talking 

Thank you.

a win-win 🎸= ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lCBZf5kWudo.html

Thank You for comment!

Thank You!

So??

Thank you, glad to hear it, good luck with the bridge repair.

Really? Xdxd

Спасибо

Thank you It’s rosewood)

Thank you!

a win-win 🎸= ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lCBZf5kWudo.html

Thank you for watching

Maybe I'll try the vinegar option in the next video. Thank You.

@@mr.k1t Be advised that the white vinegar can lighten plastic knobs, and even bone. But it's a great rust and gunk remover.

The solder will distribute the heat along the fret wire well. Alternatively you can use a iron or if you have the possibilities like Ted Woodford ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gDqh5WHri3o.html at 9:16 (I can highly recommend his channel) but I can imagine that the guys in Ukraine are at the moment somewhat restricted in their possibilities

Thank you

Obrigado!

Благодарю!

It’s just mineral oil, same as Dunlop but without lemon flavoring.

Дякую

Спасибо, когда Лады вклеены, я использую олово, чтобы температура нагревания была равномерной, благодаря чему, я могу вытащить лад быстрее и аккуратнее, без лишнего повреждения накладки.

Thank You.

Thanks! 3M Fast Cut Compound 09374

Thank you

Now I started using an ultrasonic bath, the result is much better.

Yes, you’re right. I did it, but I didn’t add it in the final montage.

Thanks!

Oops, Thank you!

Dobra restauracija a na kraju pogrešne žice

Це треба терміново виправити) Будемо чекати Вас в майстерні)

Hi, 3M Fast Compound 09374 Thank You!

I still prefer tie-end strings, as they have much more of a classical look, especially for a vintage guitar.

It’s 2.5 mm over 12th fret. It’s comfortable for me, ty for your feedback.

@@mr.k1t I’m glad you announced action at the 12th fret. 2.5mm is very nice height for a Nylon string guitar, you need at least this height on a nylon strung guitar. Many new ones that I have examined are at least 3mm at 12th fret for low ‘E’. I purchased a Yamaha nylon silent guitar recently and the high ‘e’ was 2.5mm and the low ‘E’ was ‘3.75mm at 12th fret. Good work and thank you for sharing. Very high standard of work. I cannot understand why some people have to criticise a posting when not fully understanding the difference between a steel string action and a nylon string action. I have set up many guitars and your choice of action at the 12th fret for this nylon strung guitar is just about perfect for most players.

@@terrywebb5380 Thank you for support)

When I edited this video, I did not have the guitar itself and the demo was not included in the video. Thanks!

Distributes heat evenly over the fret, which allows you to remove it faster and better. Thank you!

Thank you for your comment. Surprisingly to me, these are one of the most comfortable and workable tuners. They have very smooth lift and nice gear ratio. And I don't want to get rid of them.

@@mr.k1t Cultural industrial bias causes me to think the tuners are of German manufacture, which is probably the reason they are as you describe. I have three Spanish made classical guitars, and their tuners work exceptionally well, though they're probably no older than 20-25 years. I have found through experience that buying tuners on the web can be a crap shoot. Price is not a guarantor of quality. I was able to find a new set for about $18, plus shipping, that are of reasonable quality. Conversely, I bought a set for about $36 that were actually worse than the ones I was trying to replace. The seller was puzzled about my returning them for a refund

Sanding a little to the wanted result( at nylon guitar I like a little higher action). What about nut, it must be lower than zero fret.

Thanks for comment. What about action and type of string. This is not my guitar, I put in strings that client asked for. In the video action always seems higher.

Thank you! You're right, I agree with you on that. It might have seemed to you because of the camera angle. In real life strings on this guitar start from zero fret.

The neck was crooked, had to fix it. Thank you!

@@mr.k1t Thanks!!

Thank you. Just cause I want it😉

Аллюминиевый профиль выровняли на чпу и финально правили на стекле, наждак 180й

This is a normal action(2.5 mm at 12 fret) for classical guitar. It’s comfortable.

For better fret heating

@@mr.k1t Hello, I didn't just type this comment because soldering with tin-lead solder 61 is not good for health. Firstly, its vapors that spread around, secondly, the remnants of them that condense on the lining, and this in this case cannot be avoided, thirdly, the use of this solder complicates the technological process. There is an alternative to using solder . What is this? ... That's right, water. Well, the use of ordinary water in this case is not worse, as for extracting frets from the fretboard , of course, if it is done correctly Can 't you think of a simpler one ? See how a professional luthier does it , I 'll leave the link below . How he realize it simplistically (if you show everything completely, the whole video will take not 2 but a 20 minutes ) is shown from 1:36 to 2:36 second , I beg you pardon for my english :ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cLulJOKIooE.html&ab_channel=MuzClass

Thank you for your feedback. Of course, this Hofner is not a boutique spanish classical guitar. But from my viewpoint this is a part of guitar making and I would like to save it instead of throwing it away.

You are very biased.

Добрый день, при помощи паяльника и припоя, я могу добиться оптимального и равномерного нагрева каждого лада, дополнительно это даёт контроль степени нагрева(что чуть более важно при замене ладов на лакированных грифах) А по поводу радиуса на классике, это скорее вкусовщина, все плоские грифа на классиках, рано или поздно, превращаются в грифа с отрицательным радиусом, а легкий радиус(тут он 20, а это почти плоский) это мое личное виденье такой классической гитары

@@mr.k1t спасибо за ответ!

20

Thank You! I like leaving age marks on old guitar, maybe in the next video, I will completely restore the coverage.

@@mr.k1t awesome, thanks!

I have a almost identical hofner with metal central rod, it has had a bad cracked headstock repairing, so it should be repaired, unfortunaly i can,t show a pictere here

Sorry, Bibek, because of that bridge style, this guitar was originally made for gut strings. So nylon would now be the only choice. The tension of steel strings would ruin that guitar in a very short time. I have seen that happen too many times with guitars like this.

I like to work with bone Maybe in the next video I’ll make it out of wood.

Можно очень низко, зависит от вашего звукоизвлечение, в классической школе, принято ставить достаточно высоко струны, для большей динамики (2.5мм на 6й струне над 12м ладом) для личного комфорта, при условии ровных ладов и грифа, можно поставить 1.2 мм на 6й. Будет удобно, но за счёт потери динамики.

Action strings is subjective, on nylon string guitars I prefer to keep it a little higher around 2.5 mm

Height 2.5 mm, I am quite comfortable playing this guitar

Did u mean Putin?

No truss rod here. bridge typical of the classic. in the catalogs of those years, this guitar was listed as a "classical guitar"