#724 

David Slaymaker Thanks David! This one is just gorgeous!

thats my curtie!

Riz2336 Thanks!!!

Chester Copperpot Thanks Chester!!!

Ascyltos The way its lit now...and the red insides are really neat!

+Bo88y Beretta Neat! I proposed marriage with a Lights Camera Action too! Have to post that video one day!

Hope it helps!

We have another sold...so when we do it (its on Laway) we will do super brights

dvddmc It really looks terrific!

And its really fun to play too!

You would be right buddy.

Nightenstaff I agree...they did light the gopher on Teed Off though (it uses the same base and front clear covering).

***** t's getting more attention these days!

Thats good news!

kenny9648 See??? My college course on filmmaking helped!! :-)

Ascyltos Yes...its nearly identical! It was a really neat lock feature!

Andre Butcher Thanks! I do not think so yet...sooner or later they will though!

Lyle Johnson We bought ten of these when it was closed out, for $2199 each (the game was a huge dud!) I sold the last one in the crate for $3599. I got half of them back from those private home sales and resold, but none of them had any issues with the ringmaster with so few miles. We did get in a few vended Cirqus machines which we had to take the Ringmasters apart and clean them up. Nothing too bad! Haven't had one in our shop in probably over 4 years now. Our videos covering our sales started perhaps 2 1/2 years ago.I guess sooner or later we will get one in!!

I can see why it was a dud. I found a two part video of someone playing Circus Voltaire and in the first part sideshow sam came up and seem to last forever. The sounds it made was so annoying.

First, take out power supply and reheat solder header pins, tighten screws on regulator, and squirt contact cleaner on 5 volt pot and work it in,...then set the 5 volts right on the logic board. If still no good, and the logic board has 5 volts, the next place to look is the satellite board which is probably ice cold...the issue is to really fix this right, it should be REMOVED from logic board so underside can be reflowed...and then carefully reinstalled...that is what gets tricky--you do not want to damage the traces of the board.

PinDweeb Frank did one on a Black Knight 2000 video last August (check it out)...but I think we will make a video that ONLY shows this being done....that way, more will see it.

Paul M The eye is solid....and we spent hours already on this puppy...NEXT time, Paul!!! :-)

Lyle Johnson Sold 10 brand new and reconditioned perhaps 4...none recently....

My favorite! Nothing beats the Ring Master!

+MarkEdwardRom Interesting idea ---they DID match the teeth up to the words in the Gottlieb game Class of 1812...which you will see in next couple months!

cool thanxs

+MarkEdwardRom Yeah, I guess you could just include an actuator.

at some point, we may do this....just no time....

they are led lights that are on a wire so they can bend and be pointed at what you want to light.

@@tntamusements Do you sell them!?

Andre Butcher From Pinball Life!

Andre Butcher the return grounds on the bottom transformer are all white wires and plug into little boards on the side of the transformer. Take boards off and reflow solder on all the header pins on those boards and also burnish the pins too....those return grounds can cause all sorts of odd issues

pcuser80 We always fish them out...when we pack it up!

SuperKissFan1 My wife freaks out when she sees ME in the middle of the night!

Yes...that WAS pretty creepy!

William Schaeffer Fun stuff!! But do I REALLY remind you of them???

No, not really.. When U where laughing. It sounded so sadistically. It reminded me of these 2 characters.. Not too say U sound like them, but the 2 laugh's I posted R notorious, and that's what popped in my head when U did it.. Nothing bad on Ur part..