76MPH HUFFY KTM 2 STROKE BEACH CRUISER BICYCLE !! | MOTORIZED BIKE (Part 2) 

Shittt, this man even got people in the dirtbike community grinning with this build my guy! Haha

It's because all the motorized bike guys don't want to spend over $1,000 on their engine but would easily sell a China engine kit with a few hundred dollars of upgrades for a thousand

I guess im asking randomly but does anybody know a trick to log back into an Instagram account? I was stupid lost my account password. I appreciate any help you can offer me

@Nova Jaylen Instablaster ;)

@@mozezcen-valley7555 whomst, yea some are like that but in reality there are other factors like clutch assembly and bearings, i had a 130 dollar engine throw a bearing into the chamber, yea a thousand dollar gas bike engines overpriced but not all are scams, also crank ballancing, hard to do, most dont, high end ones do

Cole Schowe Hahahah it’s quite the experience I must say !

Scott Conger I did a thing or two! That’s why it held up well 🤙 still room for upgrades

@@UFOBUILTCO sealed bearings?

@@saved_yet_so_as_by_fire probably ceramics

Hahahahah i had to repeat 🤣

Haha love reading stuff like this man🤙! Glad I’m the reason why you wanted to build one of these crazy machines haha

Mike Bell I totally agree with ya!! STAY TUNED😎🤙

Hell yea, Those wheels aren’t built to support those speeds.

I had one tear the engine off and threw me over the handle bars like a action movie I landed on my feet but I am very athletic I did a flip about 15 feet in the air and had time to think if I don’t land on my feet I’m gonna die the momentum made me fly again that was wild

​@@drewthafooimakebeats4425 Sounds crazy enough to be real, only cause I've had a similar crazy experience where I somersaulted with a mountain bike between two parked cars, held onto the bike despite the shock of rolling on my head and back with the weight of the bike and landed upright seated on the bike and managed to somehow not ding up the cars

Aaron Davis It still proves a point. Huffy is not as bad as people think it is. It is a pretty tough steel frame. I'm not saying you go crazy and ride at 70+ mph but it surely will hold well at 35 to 40 mph

I would, look at those tires man. * forgot the comma for the nerds.

Bearing in the wheels would fall apart

@@tedpaszko8274 Right? I'm sure the frame is the strongest component on that bike.... those tires, wheels, and brakes would have me concerned.

Huffy has amazing frames that are tried and true! And are overlook bye "snobs" Wheel bearings them are NOT huffy rims. But if they was you would just swap them out every 100 miles or sooner. Have no idea how the rear sprocket is mounted yet its not a rag joint not a adapter doesn't look like a disc brakes hub could be. Or could be a flip flob hub modded idk but them hubs front and back are very nice non-huffy hubs

U better post that

update?

😂😂😂

😂😂😂😂😂😂😂😂😂

I don't because he built it right!!

kenshi600 hahah I felt the same!

K.G Gamer its a little beast!

Music

Thanks man! It’s for sure crazy haha . Check me out on Instagram also ☑️

Omfg i was like duuuuuude DISK MFING BRAKES 🤣 HAHAHA

If I mounted a engine on my road bike which is already very fast pedaling and with the motor I might be going like 100 +mph It would take about a mile for the brakes to stop me and I would have to get new brake pads and they might catch on fire because the friction of stopping at those speeds.

Remington Hawes no tire wear from chain what so ever 🤙 I wouldn’t ride it if it did haha

Welp, they are ALL illegal, so...

@@robspear03 not in my state

@@robspear03 my 212cc has a 49cc sticker 🤔 that's totally legal now 🤣

@@robspear03 theyre not illegal ? just gotta keep it under 25 mph in the bike lane. other than that you will need a m2 license

@@kushpaladin 25mph is soooooooooooo slow , I rather walk😅

IceStone69 hahah THANK YOU 🙏 🤙✨

tonyjesuslover it’s got the same one now but it’s not broken like the one in this video haha! I’ve went at it with a few Harley’s so far 😅

The UnSeEn hahah thanks man!

JEFFREY ASH that could be a possibility!!! Thanks 🙏

henry R. Hahaha you got that right 💯🤣

henry R. We all know that brakes are for quitter's.

they barely have any grease from the factory.

Could have different bearinga already. Depends what grease you pack them with, too

They are now

Rick Sauce hahah thank you!

Mingus_Dingus thank you 😎

@@UFOBUILTCO No worries man, it's a cool creation.

and thin ass tires

One pot hole. That you didn't see. And your done.

Most road bikes which are designed for speed dont have neither this either

Someone in the tour de France got to 88 mph down a hill on a road bike

@@georgebamber6871 doesn't make it any less suicidal to be fair....

pittbike GANG thank you 😁🤙 more to come!

Ryan Hill thank you!!! Truck is solid no rust all original metal

@@UFOBUILTCO yeah, it's solid. I guess that's the perks of living in a warmer climate. Every Highboy here is rusted and sitting on a farm, sadly. I love it man, it's a beautiful truck!

Ryan Hill very rare that you find a bone dry no rust truck now days

Nickael7 can u send the link to ur clone engine , I want a shifter engine like his from a true dirt bike but I don’t wanna buy a Ktm to rip it apart , I’d rather just ride the Ktm haha , but I do wanna build a nice shifter gas bike one day , one way or another

@@thelongranger55 DeNArdis competition engines, they sell the clones, they come in 3 flavors: 50cc air cooled, 50cc water cooled and 65cc water cooled. Note: These are not shifter engines, this means, you will need to buy a shift kit from sick bike parts and do some modification on your own.

My 18kW motor is nowhere as big as a 65cc ktm 2 stroke, Don't know what electric motors you're looking at which are bigger but mine can out-accelerate any petrol engine bike. There are even smaller builds like the guy fpvlee on RU-vid with a QS 250 50H motor that will out-accelerate this bike and any other motorized bike, heck it kills most cars and petrol motorcycles. I love my petrol bikes, but electric is much more powerful than what we can do using petro on these bikes by a big margin especially when it comes to acceleration.

@@FarmerFpv At high speed electric motors don't have powerband. You need massive battery packages to keep your 18,000 watts (24.29 hp) motor keep on rolling. Putting easily 200 lbs on your bike frame, which is a no-no ! BTW, you're comparing a measly 25 lbs weight 15.6 hp KTM 65cc vs a 24.29 hp motor with a massive battery pack. BTW, I check "QS 250 50H motor" not impressive at all vs a 2 stroke dirt bike of the same magnitude !!! Check this: watch?v=pyYwrDNpxP0 And I forgot, you can nitro-methane and/or turbo a 2 stroke engine and still wreck any electric motor at any time for a relatively lower weight !!!

James Rock THANK YOU 🤙Don’t forget to subscribe for all the cool future builds and upgrades to this one

PD Tech hahaha definitely the disc ! Don’t forget to subscribe for all the cool future builds and upgrades to this one

Widget222 glad you realize the work that really went into this build! Wasn’t easy! Don’t forget to subscribe for all the cool future builds

@@UFOBUILTCO subbed ✅

Widget222 thanks for the support ! Means a lot !

Ken tires seem to hold up fine! And the gears makes it all the fun

Cool. What brand tires & wheels do you use? I'm looking for bike running gear. It's not so much gears it's the chain used on those gears. I've had them come apart before.

BeLRus IndustrieS 😂😂 glad you said it because that shit cracks me up also!

Not in the least. This seems irresponsible, neat, but uber dangerous.

That back rim isn't an off the shelf part judging by the look of it bit appears to be a pitbike hub with some sort of 29 in rim and I'm sure the spokes are pretty hefty look at it compared to the front

It’s a Huffy Not even the cruiser frames from the 40s have thick enough tubing to handle 15-20hp.

That a sick asss bike best ive seen online no lie get them brakes cause tho speeds do kill

Wide Open Throttle I agree man! Stay tuned ! 🤙

@@UFOBUILTCO want to sell it??

catalick converta thanks !! Something I’ve been wanting done for a long long time haha

@@UFOBUILTCO no problem man👌

James Jenkins they do pretty well just need regular maintenance but I’m not going 76 every time I hop on it haha I got blend in at 25mph

Bolted to brake disc

I just use a little adapter that bolts around the actual hub

No. I think you already know the answer. You dont need to ask.

Seedless Grapes stay tuned. Like I said this is only the beginning

@@UFOBUILTCO And trust me. I'm not a hater. I love this bike and you definitely have writing skills. I could tell right away when you're going through those gears smooth and impressive and it just sounded so clean.

@@UFOBUILTCO Also, I did not know it was an old Huffy. I saw the Rusted seat but didn't put two-and-two together cuz you had painted it so nicely and old Huffy is actually a really solid bike. So I take that back. Thing will never fail or break. The frame is basically indestructible.

Seedless Grapes none taken man everyone has opinions including me! I love hearing the feedback! And yessir its a classic huffy! The metal is pretty think and welder pretty well when I was welding the engine mounts didn’t warp or distort

a speedway racer says no ! lol

Improvements to be made yes. BUT that’s the beauty of this to me. I’m not flying at 76mph every time I ride this thing. 20-25 is where I’m usually at on a casual Sunday

Jan Ruiter 😂😂😂 spot on with that one

Coming right up!

Taco Taco you’d be surprised! Stay tuned man trust me !

Can't or shouldn't lol

@Nimbus Nimbus give it time, something will give out

Seriously tires ,rims & brakes all have speed ratings for your safety not so you can look cool with giant scar across your face. I wouldn’t want to see that pretty face ruined because of a lack of safety. Get smart or end up in the tribute section looking like a foul

Bj Fauver Hahahah I trued the spokes and just did a little this and that and hoped they would hold up!

Sauce Junior hahaha I’ve been there already

jason reed 🤣🤣🤣 the build will just get better tho

Holzwurm _HD yessir MPH

35 mph gas bike?

MyJunker Travels they are definitely beefier than the new ones made

@@UFOBUILTCO the bike weighs as much as a fat 5 year old brat. The 70 was the last year of the first gen iron frame cranbrooks. The second gen cranbrooks came into mass production with steel frames in January of 71. An each generation after that has been all steel frames. But the first gen is the best ones, 67 to 70. Hopefully one day ya find yerself one an take her fer a rip down a hill. They sure can fly at a low altitude.

If yer not first yer last :-)

How is that cheating? Since when were there rules? Its a 2 stroke engine just like most other MB's.

Farmer Fpv oh no not you , I see your comments on every motorized bike video on RU-vid almost , or is that the drone videos I watch and see u on , did you come to pick a fight and drop ur infinite knowledge of 2 strokes on me ? , and no he didn’t cheat your right are you happy now , I simply said he cheated because I’m jealous he came up on that kind of dirt bike motor and put it into a bicycle , while I’m over here still building the 80cc bicycle engine kits nearly hitting 50mph with these little kits slightly modified, and did you miss how I said I was Impressed with his project ? you must of been distracted right after you Read the part of my comment when I said he cheated and didn’t read anything else I said because you were hell bent on trying to start some shit with me just like u do with everyone on RU-vid comments , fuck off dude , if you said that to me In person , the first thing I would had said to you was fuck off and then be prepared to bitch slap you if you stepped out of line and talked back to me after that , little bitch

Troy Collins haha I totally agree he cheated , but this is still the dopest bicycle build on RU-vid so far for me , but if we are going to hit 70mph + we really need to find a frame and wheels / tires that are well suited for it , my little stock china kits with minor port work can reach almost 50mph for me and I’m scared to even do that because I don’t wanna blow my nuts off when the piston explodes through the top of the cylinder head right into the babymaker

@@thelongranger55 I have been over 55 MPH on one. I had to turn soon so I let off. It was a buddy's bike. On a Walmart bike, stock wheels and tires. 10t and 28t drive gear. Looked completely stock minus the big expansion chamber. It hit 50mph fast!

Troy Collins hell yeah bro I loves these engine kits , I love to tune them