Purchase my new book: Arm Microcontroller Programming and Circuit Building Volume 1
amzn.to/3LFRaU5
Learn about bitwise operations:
• 11. Arduino for Produc...
Change the internal clock speed of the STM32 microcontroller to 48MHz or whatever speed your microcontroller can handle!
Links to the software:
STM32CubeIDE: www.st.com/en/...
STM Studio: www.st.com/en/...
STM32CubeMonitor: www.st.com/en/...
Parts you will need in your prototyping environment:
Kits to get you up to speed quickly:
newbiehack.com...
If you already have the microcontroller, here are some breakout boards to use:
64 pin - amzn.to/3rUXeiq
48 pin and others - amzn.to/3IVkC6D
STM-Link V2 Programmer:
newbiehack.com...
amzn.to/3IIZlgj
Prototyping Breadboards:
newbiehack.com...
amzn.to/3o2Nh1g
Resistor Assortment Kit:
amzn.to/3H4R3ii
Solid core hook-up wire 22 AWG:
amzn.to/3IDGinA
amzn.to/3g5TKUJ
LEDs and Displays:
newbiehack.com...
amzn.to/3Az1zf7
Trimmer potentiometers:
newbiehack.com...
amzn.to/3H6q067
The Dynamixel servo I will be using in the USART videos:
amzn.to/35s3qHl
Microfarad Capacitor Assortment:
amzn.to/32BIX1G
Capacitors on Newbiehack.com:
newbiehack.com...
Electrolytic Capacitor Assortment:
amzn.to/33TtLxt
The cheap oscilloscope that I use (because it's cheap and will work all of the projects in these tutorials): amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: amzn.to/2qizK5M
The brand of the multimeter that I use and the one I recommend: amzn.to/2qicUez
24 авг 2024