80 Series A/C Tensioner Pulley Replacement

Просмотров 25 тыс.

% 246

Recently or 80 series Land Cruiser had developed a belt squeak. Upon inspection, we found the noise was coming from the A/C compressor belt tensioner pulley. This is how we replaced it. If you have any questions about this repair, we'd love to hear them. Comment below! Please don't forget to subscribe!
You can also follow us at:
Instagram: @Family Adventures Overlanding
Facebook: Family Adventures Overlanding
Twitter: F_A_Overlanding
Web: www.Familyadventuresoverlanding.com

Опубликовано:

18 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@kokadjooutdoors620 4 месяца назад

Thanks for the video. Was wondering why couldn’t get pulley off the stud. Was hoping didn’t have to undo the long tensioner bolt completely. Thought would come off stud after loosening the front nut. Working on a 4Runner but take same pulley so learned from this video

@adri3n1991 5 лет назад

I know filming while working on a car is a pain. Most of us cant or will never do it. keep it up! I look forward to seeing your future repair videos.

@Ghostrider-71 Год назад

Very informative video. Thank you for posting.

@phendrix9476 4 года назад

Thanks for the video. It’s not easy to get the camera angle right AND make the repair in such a small space. You did a great job. I’m changing mine tomorrow

@FamilyAdventuresOverlanding 4 года назад

Thanks for watching!

@cliffsmith8755 Год назад

Thanks for the video. My FJ62 has the same set-up but the nut on that pulley is really stuck. So much that I wasn't sure exactly how it was supposed to come apart.

@emmanuelalbert2929 Год назад

Great job mate

@paulharrison4917 4 года назад

heads up if you haven't taken the skid plate off in awhile be prepared for a face full of dirt and oil

@KiyaWarrior Год назад

Nice video, I think I put my belt on too tight last year and now my bearings in my AC compressor are shot. Still blows cold but just squeals whenever the AC is on. Have you replaced just the clutch on the compressor before?

@FamilyAdventuresOverlanding Год назад

I haven’t, but I believe there is a write up on ih8mud.com about it.

@StrugeLabs Год назад

I have the same issue on my HDJ81V. Trying to find part number for bearing and want to find a belt as well while I'm under there.

@mikesmacey 2 года назад

Great video. Thx.

@LeifNelandDk 3 года назад

Tips for replacing the AC clutch?

@kylestevenson1778 2 года назад

Was yours making a lot of noise? Im having a lot of rattle-like bad bearing noise and this one has a lot of wiggle to it. I ran my 80 in temperatures below -40°F for a few days so I think the belts got hard and messed up the pulley bearings a bit

@FamilyAdventuresOverlanding 2 года назад

It had some play, but mostly it was making noise.

@ashleywalker8994 20 дней назад

I've removed the old pulley that was completely shot, but when the pulley came off, the inner bearing stayed on the stud. Do you have any ideas how to get it off mate?

@FamilyAdventuresOverlanding 20 дней назад

You can spray it down with penetrating oil and see if it’ll loosen up. If that doesn’t work, polish the shaft in front of the bearing with some sandpaper to remove the grime and burs, then you can thread a nut onto the end and use a hammer, hitting the nut only, to drive the shaft through the bearing.

@maxbutler4149 5 лет назад

I have used your video but need some advice. You show you put the old washer back in the back in the old pulley. According to Toyota there is no such part. I bouught a Cruiser that did not have the pulley. Do you have any thoughts or can you show what the washer looks like

@FamilyAdventuresOverlanding 5 лет назад

Max Butler I don’t have a close up of the washer at this time. I’m not sure if it was something they only did on certain years. In the parts catalog, it looks like there are three different part numbers listed depending on option code and year. It maybe possible that my year had this for correct spacing. Sorry I couldn’t be more helpful.

@maxbutler4149 5 лет назад

I see a washer on the photos for the older models. Mine is a 1997. I think I need to order the older part as it contains the washer you speak of. Thanks for the response

@Jon-wf1sn 5 лет назад

This was a great help. Thanks for the video

@FamilyAdventuresOverlanding 5 лет назад

Jon Atwater thanks for watching!

@JR-rp7vr 10 месяцев назад

Thanks for the video brother. Subscribed. I'm still trying to figure out where the two wires coming off the AC compressor go. I know one goes to some round looking thing under the heat plate but can't get in deep enough visually to see which one goes where. Sucks. I don't see it even in the FSM.

@avpr1c 5 лет назад

You mentioned at the end there’s not much information on these trucks. IH8Mud is pretty much the Bible for all things Land Cruiser. Especially FJ80. I’m sure you’ve been on that forum but noting it case not, or for others

@FamilyAdventuresOverlanding 5 лет назад

Tedro Peders thanks for your input. I have been on Ih8tmud and it is a good resource. I’m not very big of forums though, as the threads always seam to turn into a great debate as to who is correct and who is not. But it’s definitely worth mentioning. Thanks again!

@cmdeeqtee7057 4 года назад

How do you know when it needs to be replaced?

@FamilyAdventuresOverlanding 4 года назад

Typically it will be associated with a belt squeal. The best way to tell though, is to take the belt off and spin the pulley by hand. It should turn smoothly and make little to no noise. If it wiggles front to back or sounds like rattling beads or binds, it’s a good indication that the bearings are compromised and replacement is needed. I hope that helps and thank you for watching!

@ecbravo999 4 года назад

The pulley on my Cruiser started to squeal upon startup as a function of temperature. Hotter no squeal colder more squeal...

@petegangies 10 месяцев назад

@@ecbravo999 did you work out what the cause was?

@ecbravo999 4 года назад

Need to get 1/4 inch impact driver to speed things up ...

@Helixxification 4 года назад

Do you have an information on belt part numbers?

@FamilyAdventuresOverlanding 4 года назад

I do not, Sorry. I usually use www.toyotapartsdeal.com to look up my parts before calling the dealership to order them. You can order parts directly from that website too. I had access to a wholesale account at my last job, so I always ordered from the dealership.

@m.a.r.s.94 5 лет назад

After removing the front bolt, loosening the long bolt it won’t budge. Will not move upward. It’s a pain in the ass.

@MS-ho9wq 4 года назад

Thanks, mate, this was nice and clear and helped me out. But please, take your ring off when working on your car! I do not want to see you snag that on something and blow your finger gasket.

@FamilyAdventuresOverlanding 4 года назад

M S thanks for watching!