88-98 GM TBI Fuel Injector & Fuel Filter Replacement 

Super helpful video. Everything is visible and you took time showing each step. I just watched this as I changed the injectors on my old plow truck. Success!

Mine was nice and clean like that when I had 98 k miles on it. Now at 202k, she's a rusted beast. Michigan does great things to cars.

This video is wonderfully made. Giving straight to the point information and a clear view.

I'm not sure if i can trust someone who keeps their truck that clean and presentable... A clean truck is a sign of a sick mind! 😂. This was pretty helpful actually, thank you

Super clean truck. Thanks for posting.

This is an extremely helpful video. I would recommend this to anyone who need to know how to replace these 👍

Very clear video man . Good job . Nice truck .

I just did one of these. So nice to work on! GM made these trucks simple and reliable.

Good video, if you notice there is a small hole on the bottom of the injector that needs to be lined up, if not it'll smash the steel hollow pin.

Great video! Clear images, step by step instructions…Saved me a bit of $$. Thank you 🙏 Definitely owe this man a beer!

اللهم صل وسلم وبارك على عبدك ورسولك محمدﷺ

Great video very clear and very well explained

Bro you saved me, very helpful!

If you are going through the trouble of replacing the injectors, you might as well remove the entire throttle body from the engine and do the entire rebuild. It isn’t that hard and the gaskets between the throttle body and the intake manifold are due to be replaced, especially if your injectors need to be replaced. You will see what I’m talking about when you take it apart. Another thing, the larger top injector orings are a bit smaller than original equipment. That’s why the gasket kit that comes with the injectors have that steel ring in there. It fits under that top oring BEFORE you put the upper oring in. And lastly, the fuel regulator diaphragm should be changed too. There are rebuild kits that come with all of the gaskets you will need to do the entire throttle body, including the diaphragm.

Just subbed from Michigan this was very helpful I got a 89 Chevy caprice I will most likely need to do how much does it cost for that set

Nice clean job....thanx for the tip...Now i can do my 88 Silverado TBI 5.7 with no worries.

Easy as pie. Lord bless the TBI. 'Unfortunately' I have the next gen Vortec engine and would love to forfeit the few (alleged) extra horses for ease of repair of the TBI engine. I keep telling myself I am still better off than with the LS, where I need to pull the cylinder heads to get to the lifters and accessing the oil pump isn't much easier either.

Just a suggestion! You have to allow the gasket(s) soak,preferably overnight.

Thank you for this video! Getting my 1992 Isuzu Rodeo “brodeo” up and running

nice vid dude i wish i had more than 2 thumbs but yea great vid im having trouble starting my truck chev silverado 90 change the dist cap & gas filter now it's cross my fingers 😄

Beautiful truck brother ❤

Super helpful- thank you for posting!

How the hell is your engine that clean!? I’m jealous 😩

Mr Glonky.. so in order to bleed the lines just unplug the fuse, let it run until it dies..and then I can start changing fuel pump, injectors, etc?

It didn’t come with a new diaphragm for that metering spring? Underneath the brass dome looking thing. There’s a spring in there, and a diaphragm behind it that’s made of rubber. They stretch and degrade over time. Major problem in small engine carburetors. Walbro makes new metallic coil spring upgrade kits with a non gasoline degradable membrane material to replace the old style standard metering diaphragms. They are supposed to be lifetime upgrades. Someone should make a GM kit of this type. If anyone tries to open that metering housing too quickly, I hope you like Jack in the box surprises.

3 bolts is all it takes to take the throttle body off. Definitely way easier to do that than do this stuff bent over the truck. Also good to clean the throttle body real good on an old truck like that. Makes a noticeable difference

My 94 s 10 has 171,000 miles and injectors are original. How do you know if they need replaced if the truck runs ok.

That kit come with both injectors or just one? I need this on my 89 k5

Great video well shot

What symptoms was your truck having for you to do the injections? My truck stalls once I come to a stop sometimes, I got the parts to do my 1992 Chevy k1500 pickup and I believe it stalls because of the fuel injectors or the regulator? What do you think?

How many miles should a full tank give

Hey bro will replacing these resolve the problem of a gas smell?

Awesome tutorial!

What camera setup you are using. Cristal clear man. Great picture quality. Please share the setup.

That video was fucking MINT my guy. Thanks a million

What was your Tahoe doing I have a 95 and mine idles good but after you get going down highway you gun it and it spits spatters backfires then takes off

Excellent video

Can faulty fuel injectors cause smoke on startup

Does it matter which connector goes on which injector

What’s the upper price gasket called we’re the t20 screws on

Where you get that chrome filter pan?

Clean truck I got one exactly the same

Did this resolve your issue from rough stalling and idle?

where did you purchase new gasket and o-ring kit

Great video!!!

Would have liked to see that new spray pattern on the new injectors

Nice video, but I have a problem w/ my truck. Fuel Injectors leaked but I fixed that. Now my truck wont start, the starter makes a rapid clicking sound but nothing happens. Do you have an answer for that?

Good video thank you

Good as fucking video bro....congrats kee it up

Thank you great video

When trucks were trucks easy and reliable

Man that obs is stupid clean 🧼

Good shit

Good job

I think my 95 Silverado tbi needs new injectors. It has been stalling on me from time to time. 203k miles

Good job on the video but don't cheat yourself by skipping places gaskets go

Nice

Will entire tank come out or just a little gas

20 INCH pounds

you must be in California as the I see the undercarriage is so clean.....

You meant 88 to 95

20 ft lbs holy $4!+

AC/Delco is made in china, expensive and garbage. 😮

Gas flows from the tank to motor,arrow facing toward engine