No video :(

90-93 Accord Tie Rod Ends (Inner and Outer)

Подписаться 5 тыс.

Просмотров 7 тыс.

50% 1

1991 Honda Accord Inner and Outer tie rod ends replacement. This applies to the 90-93 Accord. These tie rod ends ares super loose and have busted boots and bellows. I replaced all four tie rod ends and the boots/bellows as well. I will put the Moog equivalent boot/bellow kit below on amazon (which is a little cheaper) below along with the tie rod ends as well. I will put the part numbers I used also for anyone wanting them.
Amazon Links for parts:
Bellows/Inner Boots: amzn.to/3oyoGlV
Inner and Outer Tie Rod Kit with Bellows: amzn.to/31CpqxA
Parts I used:
Bellows: K9306
Inner Tie Rod: EV283
Outer Tie Rod: Driverside ES3153 Passengerside ES3154

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@user-dp8sb3cm7f 6 месяцев назад

Thank for the great tutorial brother you just save me tons of money!!!

@operationoverhaul 6 месяцев назад

Not a problem. i am glad that the video helped you out. If you need anything else feel free to contact me and I will help out as much as I can.

@carlevfra Год назад

Thanks for the good videos! I just bought a 93 Accord LX and am rebuilding the front end a little bit at a time.

@Oscar_delta13 Год назад

Time to remove outer tie rod: 5m Time lock washer tabs 10m Time to remove inner tie rod 5m Time to reinstall inner tie rod boot 1 hour Lmao

@operationoverhaul Год назад

I swear this is the truth on a lot stuff on these cars. lol

@mariaquinones5628 2 года назад

Good job

@operationoverhaul 2 года назад

Thank you I appreciate the comment and view.

@romulosanchez7798 10 месяцев назад

Thanks brother

@operationoverhaul 10 месяцев назад

Your welcome and if you need anything else let me know

@GageyB Месяц назад

Hey fellow Accordians, I have a 91 EX and I just can't diagnose the overheating. My coolant levels are fine and about 15-20 minutes of driving, i get a burnt oil smell and my oil light comes on. I dont have a/c so could maybe fixing all the a/c problems prevent that? Forgive me if any of this sounds laughable for I am not mechanic savvy

@operationoverhaul Месяц назад

I am guessing you checked for any leaks already. I would let it come up to temp and check to see if both radiator hoses are hot. If they are not both hot then you may have a bad thermostat

@mariaquinones5628 2 года назад

Thank you

@operationoverhaul 2 года назад

You're welcome

@carsonplz8657 2 года назад

Instead of using a crows foot could you also use a nut and jam nut to just wrench the inner tie rod off from the end?

@operationoverhaul 2 года назад

Yeah that would work too. I never thought about doing it that way. That's a good idea, I may have to try that next time.

@jobydelarosa4539 Год назад

Not if ur inner tie rod is super toast, mine just spun freely 😮

@entreprengineer 2 года назад

what is the spec. torque wrench for the tie rod nut? Thanks.

@operationoverhaul 2 года назад

The tie rod nuts torque to 33 lb ft (45 nm) and when attaching the tie rod to the steering rack it torques to 41 lb ft (55nm)

@crooksonestopshop Год назад

would i have to get the crow foot or is there a bypass way to get the bolt

@operationoverhaul Год назад

There is actually another tool you can use. I'll get you a link when I get home and send it to you

@crooksonestopshop Год назад

@@operationoverhaul ok thank you

@operationoverhaul Год назад

@@crooksonestopshop amzn.to/3F3zfoS this should be the link to it. You can bolt it around it and then that should take it off.

@izayajauregui2251 Год назад

What size was the crow foot

@operationoverhaul Год назад

I believe that they were a 17mm.

@rutenmedita4686 Год назад

Great job . What brand are the tie rods thanks

@operationoverhaul Год назад

They are masterpro brand which is the oreilly store brand. But that part number will work on Moog brand as well.

@hypegamer02 Год назад

Is the inner tie rod same on both sides and do I need to order 2 inner tie rods or just one? What all do I need to fix the inner tie rod

@operationoverhaul Год назад

The inner is the same on both sides so you need to get two inner tie rods but you have to remove the outer ones off of the inner tie rods.

@hypegamer02 Год назад

@@operationoverhaul how would I know if the inner tie rods need replacing as well? Tie rod ends on my car have busted boots too, and I hear a knocking driving down the road. Sometimes it’s there, other times it drives fine. But since noticing the issue it sound a lot worse. I went ahead and ordered a kit on eBay motors, but I don’t have all the tools needed to get the boot off the inner tie rod. That’s the only thing I’m gonna struggle with I think. As well as control arms maybe. I got a kit that included those, so imma replace those too since that was on my list on things to work on in the future.

@operationoverhaul Год назад

@@hypegamer02 if you shake the tire on the front and rear of the tire it will move in and out of the wheel well. The knocking could be the arms as well

@jobydelarosa4539 Год назад

Grab tire at 3&9pm