98 - 02 honda accord brake master cylinder 

You made some good points here. Nicely edited video which makes it a joy to watch.

I would recommend cleaning the reservoir before putting it on the new MC, and change the old dirty gloves to avoid contaminating the new one. Glad to see you bench bled it.

Lol the music was a trip man and too funny having a conversation about someones diabetes pills in the background i liked this video 👍🔧

Great on top camera work! It took any broohaha out of replacing it.

thanks for the simple video very easily understood. good job.

Thanks a ton!. I have a V6 2001 Accord coupe and everything is the same except for the two lines going into the side of the master cylinder are 12mm like the back two 12mm bolts. You will most definitely need a flared open 12mm wrench before you get started and maybe a few extensions of different lengths for the back bolts on the booster. I wish I had a ratcheting 12mm wrench for the back driverside side bolt if you have one , it'll save some time. There is very little room for a wrench or socket wrench to fit. I had to use a regular flared wrench and had to keep repositioning the wrench only getting a 16th or an 8th of a turn each time flipping the wrench to get a better angle. as luck would have it . the bolt was sticking just enough every turn to not be able to use my fingers and my good ratcheting wrench disappeared lol.That bolt is the trickiest smallest space you'll have to fit your hand in on this job but its not too bad. Just don't drop the bolt or washer. I bought a magnet bowl just for that part after watching this video. Also I didn't have a syringe but a turkey baster with a makeshift tube on the end will work. It just takes like 30 or 40 times to get all the fluid lol. Oh one more thing. My bench bleed fittings were a little different. They looked like little syringe tips but you just stab those in the small holes nice and snug. Pretty self explanatory. Hope this helps anyone like me today! Keep rockin \m/_ and thanks again for this video.

is there a torque spec when you connect bolts back on

Thank! But my Brake Master Cylinder Caps got problem, the brake fluid go inside Brake Master Cylinder Caps m do you know how to clean the Cylinder Caps? thanks

Question Can my issue be the Master cylinder is bad when I don’t have any break fluid come out at the rear breaks bleeder screw but do have fluid at the front breaks bleeder screw.

Getting them out on some cars is a real pain in the a#@! This one looked like an easy one. =)

Hey I like the intro

Music was dope

I didn't bench bleed mine. Filled it up pumped a few times cracked lines and bingo.

What line is for the rear on the master cylinder?front or rear line?

Probably seems like a dumb question, but how do you remove the black metal bar from the suspension tower? I only see 2 nuts on one side, but nothing on the other side and I want it out of my way to replace my brake booster.

What size is the bolt connecting the cylinder to the reservoir?

do you have a video of changing brake booster

Do you need to bleed all 4 tires after the master cylinder.?Good video

Just did a front pad and rotor replacement on my buddy's 01 Accord and neglected to tell him to pump the brake gently to re-seat the pistons. He goes to move it off the work space and the pedal goes straight to the floor with zero braking action, and repeated pumps do nothing. Must've blown the MC's interal seals, I'm guessing. Looks like my short job is turning into more.

A question??? Hello

Why no mention of using a new rod seal?

Nice Job..............I would have cleaned that Reservoir since it was already removed from the master cylinder - All the "goo" that was in there is going back into the brake system and the NEW Master Cylinder - "It is like putting on Dirty Underwear after taking a shower."