99% of Beginners Don't Know These 5 Wood Finishing Secrets!

Подписаться 592 тыс.

Просмотров 558 тыс.

50% 1

Wood finishing is easy if you avoid these 5 mistakes. I'll show you how to properly sand, stain, and clear coat your woodworking projects.
This video is not sponsored. Some product links are Amazon and other affiliate links which means if you buy something we'll receive a small commission. This helps support my channel so I can continue to make content like this.
Videos To Watch Next
How to Build the Table in this Video - • How to Build a Side Ta...
Desk Build Video - • How To Make a Modern D...
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
Products I Use and Recommend
CA Glue Brown - amzn.to/3J4EWW8
CA Glue Black - amzn.to/3QX8rer
CA Glue Clear - amzn.to/3XqkhR1
Activator for CA Glue - amzn.to/3iTiWTw
Sanding Contour Pad - amzn.to/3kypfMX
Sanding Mouse - amzn.to/3kAhCFy
Sand Paper I Use - amzn.to/3WmjPlm
3M Sander (Amazon) - amzn.to/3D6iiJf
3M Sander (TayTools 20% off) - lddy.no/1emh0
Kreg Project Blocks (Amazon) - amzn.to/3D62575
Kreg Project Blocks (Acme Tools) - imp.i284638.net/9WmAvY
Microfiber Towels - amzn.to/3XPdi3U
Mineral Spirits - amzn.to/3wiHad1
Pre-Stain Conditioner - amzn.to/3wp2228
Spray Laquer - amzn.to/3XQNNPD
Laquer in Quart Can - amzn.to/3ktWjWi
HVLP Sprayers - amzn.to/3QUco3y
Stain I Used for Top - amzn.to/3ZW5z5F
Stain for Base - amzn.to/3D49Gmi
Gloves - amzn.to/3ZMysS1
Other Stuff In Video
Tripod for my phone - amzn.to/3D1hohm
Ball Head for Tripod - amzn.to/3QSv6c5
Phone Adapter for Tripod - amzn.to/3kvIeaQ
The shirt I was wearing - www.kerusso.com/products/keru...
Other Tools/Equipment I'm Asked About Often:
Boots I'm Wearing - amzn.to/3HkUl3y
Where I get my t-shirts (mostly) www.kerusso.com
Toolbox in Background - homedepot.sjv.io/x9B2xy
Tool Wall over Miter Station - amzn.to/3ZgWq7B
Digital RU-vid Sign - amzn.to/3GL2a2e
Camera Gear I Use - kit.co/731Woodworks/camera-ge...
Computer Equipment I Use - kit.co/731Woodworks/731-woodw...
Follow me on Amazon for more tool reviews: www.amazon.com/shop/influence...
Join this channel's Patreon to get access to exclusive member only behind the scenes videos, member only livestreams, discounts, and other cool member only perks! / 731woodworks
Join this channel to get access to perks as well:
/ @731woodworks
Get $10 off any order of stickers, labels and more using this link: www.stickermule.com/unlock?re...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks RU-vid channel www.731woodworks.com/youtubed...
0:00 How to Stain and Finish Wood
0:54 Removing Wood Glue
1:58 How to Fill Knot Holes in Wood
3:46 How to Sand Wood
5:25 Prepare Wood for Stain
6:20 The Secret to flawless wood finish on pine
7:08 How to Apply Stain to Wood
9:35 Circle Marks in Wood Finish
10:02 Light Spots after Staining Wood
10:53 Wood Staining Mistakes
12:17 How to Apply Laquer to Wood
12:54 Polyurethane vs Laquer
18:18 Applying Laquer Tips and Tricks

Хобби

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 356

@731Woodworks Год назад

▼EXPAND FOR LINKS TO THE TOOLS▼ 🎥 Watch Next - How to Build the Table in this Video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SMC_85ULxa8.html 🛠 Tools In This Video: CA Glue Brown - amzn.to/3J4EWW8 CA Glue Black - amzn.to/3QX8rer CA Glue Clear - amzn.to/3XqkhR1 Activator for CA Glue - amzn.to/3iTiWTw Sanding Contour Pad - amzn.to/3kypfMX Sanding Mouse - amzn.to/3kAhCFy Sand Paper I Use - amzn.to/3WmjPlm 3M Sander (Amazon) - amzn.to/3D6iiJf 3M Sander (TayTools 20% off) - lddy.no/1emh0 Kreg Project Blocks (Amazon) - amzn.to/3D62575 Kreg Project Blocks (Acme Tools) - imp.i284638.net/9WmAvY Microfiber Towels - amzn.to/3XPdi3U Mineral Spirits - amzn.to/3wiHad1 Pre-Stain Conditioner - amzn.to/3wp2228 Spray Laquer - amzn.to/3XQNNPD Laquer in Quart Can - amzn.to/3ktWjWi HVLP Sprayers - amzn.to/3QUco3y Stain I Used for Top - amzn.to/3ZW5z5F Stain for Base - amzn.to/3D49Gmi Gloves - amzn.to/3ZMysS1 Other Stuff In Video Tripod for my phone - amzn.to/3D1hohm Ball Head for Tripod - amzn.to/3QSv6c5 Phone Adapter for Tripod - amzn.to/3kvIeaQ Shirt I was wearing - www.kerusso.com/products/kerusso-christian-t-shirt-psalm-71?_pos=2&_sid=e9332a798&_ss=r Other Tools/Equipment I'm Asked About Often: Where I get my t-shirts (mostly) www.kerusso.com Toolbox in Background - homedepot.sjv.io/x9B2xy Tool Wall over Miter Station - amzn.to/3ZgWq7B Digital RU-vid Sign - amzn.to/3GL2a2e (If you use one of these Amazon and other affiliate links, I may receive a commission) Other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe the 731 Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store use code 5NEWTOOLS to save 20% off your order. Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

@terrystucker6433 Год назад

hey, whats a good blade for a 12" miter saw (not sliding).

@731Woodworks Год назад

@@terrystucker6433 I like to use 80 tooth blades on my miter saw. CMT Chrome blades are my favorites.

@erinbradshaw2900 Год назад

Hi Matt. Thank you for the helpful tips! Any suggestions if you don't want to stain the wood but just want to enhance/bring out the natural markings of the wood?

@derrickwalker538 Год назад

Matt, this has nothing to do with woodworking but I am asking for you to lift me and my family up in prayer. I’ve been under a unmeasurable amount of stress from work, and I feel the Holy Ghost stirring in my spirit. I know I have backslidden and under conviction. We just now got back in church and the moment I walked in I felt an unexplainable load lifted off me! Just asking for prayers because I need all the help I can get to keep me dug in and stay planted in the Lords path!!! Thank you for all you do brother!!!!

@derrickwalker538 Год назад

@dennisehileman7592 3 месяца назад

I use my sanding dust with wood glue to fill my knots or repairs. Let dry over night saves tons of money

@reesemattison8519 2 месяца назад

I can vouch for this statement. I do the same thing,and it works great.

@victormatamoros8302 7 дней назад

Exelente comentario 😂

@allangordon4585 Год назад

Hi Instead of using prestain which by the way is hard to find in the uk we tend to use teabags for pine and high tannin soft woods just get 2 teabags and put in a cup of warm water and leave till cool then paint on your pine and let dry this does 2 things it brings out the tannin in the wood and stops blotching especially on soft woods it also raise's the grain which you can sand down. Great videos by the way

@sherrypersinger7056 Месяц назад

A trick I learned from my dad was using good old-fashioned brown grocery bags as sandpaper. It's my good to for a final sanding. Sounds crazy, but I dare anyone to try it. And they're free with a purchase of goods 😉

@Gozeto17 Год назад

Here is a tip from a former aircraft painter. When ever you sand anything before you apply a coating, rub the item with tack cloth. It will remove all dust and leave a little residue to help apply your coating.

@Michael_Print 9 месяцев назад

Before a tack cloth I take one of those blue paper towels you get at homedepot etc, wet it, strain as much water out as possible, and get most of the dust off that way. If it's something relatively small maybe just a tack cloth would do though

@LucyKaboom 9 месяцев назад

Yup , I used to paint custom hot rods and tack rags are a must. Any time you sand, even between coats.

@subphonic8585 7 месяцев назад

@@LucyKaboomreusing same tack between grits?

@brucehansen7949 6 месяцев назад

@@subphonic8585maybe with bikes but with wood working there's no need to tack cloth between sanding grits, just blow it off with an air compressor it's good enough. Also Tack cloth really isn't that important if your just gonna use stain, you won't tell the difference if you use it or not as long as it's clean to start with, air compressor saves me a lot of money

@tobeforgottenisworsethande8995 2 месяца назад

Duhh

@billcoggins593 Год назад

Actually you don't have to sand that spot back out. I was recently shown a tip in which we tore a piece of 120 grit sandpaper off of a used disc. We then dipped it in the stain and lightly sanded the spot with the stain on the paper, then wipe off the excess. Repeat until you get the desired color. It cleaned up my rookie mistakes pretty quickly, and there were several. Mistake 1 is real...avoid at all costs if possible! Titebond is water soluble when still wet, so as Matt shows, wiping squeeze out off with a damp paper towel or wet cloth fixes a lot of problems before they get going.

@oldtireman4665 Год назад

When I worked in the mill room of a big door shop, we were constantly steaming out dings and divots, especially on the six panel pine doors. We used good ol’ brown paper towels, damp but not soaking wet and a hobby heating iron with a head about 1 1/2” by 3 inches. A household clothes iron with the steam turned off will do the same thing. Light sanding afterwards to knock down the raised grain is usually needed. We used to toss our stain rags in a five gallon bucket half filled with water.

@marksherman3423 Год назад

We had a door shop and ran into the same problems. Rather than steam we'd use a wet sponge and squeeze water drops on the imperfections. After the grain raised and dried we'd sand it smooth. Amazing the size of imperfections that can be fixed by doing this.

@davide152 Год назад

Put your stain rags in a bucket of water when done. I've seen rags spontaneously combust in a matter of minutes if the sun is beaming on them. You can also spread them out to prevent combustion. Waded rags combust a lot easier.

@michaelgodfrey9384 Месяц назад

Learned all of these issues the hard way on my early wood projects. Sanding the stain off and correcting the surface then re staining solved it. Lesson learned.

@ScottS360 Год назад

Wadding up oily rags then dropping them in a pile on top of dead leaves and dry pine needles seems like a recipe for starting a fire. I was always taught to lay rags flat until they're dry THEN dispose of them. My finishing projects tend to be small, so I can usually get away with draping rags around the top of a metal trash can (making sure there's no overlap) while they dry. I know some people who soak their rags in water, then wring them out, before lying them flat to dry. If I were using tons of rags during finishing, I'd probably buy one of those all-steel Justrite oily waste disposal cans.

@gardening-in-the-woods Год назад

Oily rags dumped into a trash can could result in a fire because there may not be enough air movement in the can to properly dissipate the fumes from the rags, causing them to self combust. Putting them outside in open air will solve this problem. Unless of course you make a huge pile of rags.

@ScottS360 Год назад

@@gardening-in-the-woods the problem isn't fumes, it's the heat generated by the oils curing. Too many rags with too much oil in close proximity can generate enough heat to ignite the cloth. The resulting fire could ignite the other contents of your trash can (ex: wood scraps) or potentially even the can itself (if it's a flammable plastic or another flammable material). Purpose-built metal oily waste disposal cans, like the ones made by Justrite, limit the availability of oxygen (which is required for a fire to start) and contain that fire should the worst happen. Laying rags flat outdoors ON A NON-FLAMMABLE surface (like concrete or brick) is also an acceptable solution. Piling rags on top of dry leaves and dead pine needles, like Matt did, is the wrong way to go; that's the kindling I use when I'm TRYING to start a fire!

@gardening-in-the-woods Год назад

@@ScottS360 Perhaps I am a little off on the science, but my point is that if you have the rags outside where the air can cool any of the potential heat from oils curing etc. you have solved the problem. Confining the rags in an areas where they cannot vent is the problem. I always place my oily rags outside, usually hang them on something so they can air out, that way there is no possible way they can burn down my shop. Besides, why would you want to smell the stinky rags in your shop as they are drying.

@ScottS360 Год назад

@@gardening-in-the-woods inside versus outside doesn't matter. A big pile of oily rags outside is just as likely to self-combust as a big pile of oily rags inside: chemical reactions don't stop just because you change their location. If you spread the rags out, either inside or outside, so the heat isn't allowed to build up you won't have any problems. If you put them in a sealed metal container which is designed to prevent fires, like the ones favored by larger and commercial shops, you're not going to smell anything until you open the lid on the container.

@gardening-in-the-woods Год назад

@@ScottS360 Sorry, I did not see a big pile of oily rags in the video. Just one rag and a pair of gloves. I appreciate your concern with regards to fire hazards,but investing in a commercial firesafe box for a couple oily rags a week doesn't make sense to me. Outside air is more than sufficient to mitigate any potential fire in this video.

@tonyr3352 Год назад

The key is to avoid the extra sanding. Clamp marks can be avoided by simply making little squares with cork to protect the wood, especially soft woods. The tool marks on the legs should have been sanded before the assembly, it's a lot easier. A little more care up front means a lot less sanding.

@craigmckinney2219 Год назад

let me point out one thing. Early in the video you show 2cans of stain. Varathane and Minwax. These are 2 completely different things. Minwax is a penetrating oil stain. You apply it it soaks in and that is it. That color is the color you will end up with. even mineral spirits won't effect it. Varathane, however is a pigmented oil stain. you put it on and wait then wipe off the excess. If it is too dark take some mineral spirits and you tone down the color. It won't all come off, but it is adjustable. Putting on more will give you a much darker version, not so with Minwax. Also, a dark color of the Varathane can be used to completely change the color of a stained piece. Also, a rag with mineral spirits can be used to blend the color with Varathane.

@jonmhayden Год назад

I love the stains at Home Depot that state prestaining not required. They give a consistent stain on pine. I never use pre stain conditioner now.

@jakelotter9130 Год назад

Finally a RU-vid woodworker used lacquer! FYI if you want better lacquer find yourself a Sherwin-Williams and get pre-catalyzed lacquer, you'll thank me later. Another Tip... Always, and I mean always add Lacquer Sanding Sealer to your finishing steps.

@JasonPeltier Год назад

Can you explain the difference between pre-cat and "regular" lacquer like Deft? I always hear that term but never what it means. And are they applied the same way?

@jakelotter9130 Год назад

@@JasonPeltier sure! Pre-cat (Catalyzed) lacquer is formulated with a substance that increases the rate of chemical reaction. This substance being the catalyst. Simply put, Pre-cat lacquer dries rediculously quickly and very hard in my experience. I find it extremely durable and moisture resistent compared to any other finish I have used on kitchen cabinets. This HAS to be specifically applied with a spray gun. It simply cures to quickly to brush. Most lacquers I would not recommend using a brush unless specifically specified as "brushing". Hope this answers your question!

@mattheffron391 Год назад

Great video, as usual. One tip that I've learned. If you want a matte or flat "clear" finish, use the gloss formulation for all but the final coat. This especially important if you're going for the "deep" look on the piece. (I mostly have done lathe turned projects where that's more common.) The matte and flat finish effect is accomplished by adding solids to the mix. Using that for all of the coats can make the final finish look a bit "muddy", or "cloudy", because of the extra solids in the undercoats.

@danmarshall5895 Год назад

For the clamp marks, I'm a fan of putting a wet rag over the mark and ironing it. The wood swells up and light sanding usually blends it right back to normal.

@tchevrier Год назад

That would be my suggestion also, because the wood is compressed in that area. Sanding isn't really a good way to get rid of those marks.

@gotahvcls 5 месяцев назад

your tee-shirts mean a lot to me by directing me to read something new or over again. I thank you.

@FixItFrench Год назад

😊Great tips, 👍🏼I use to get those wood glue spots all the time. Never even new until the stain was complete. Also I use a scrap piece between the project and the clamp. That way the clamp marks don’t show up

@TacoTeaser Год назад

I've used newspaper as a fine sandpaper to brush off fine particles after finishing with laquer. Works great.

@JasonPeltier Год назад

Watch out that the inks don't stain the wood. I buy rolls of brown paper from the orange store to use as a final denibber

@robb2869 Месяц назад

Thank you Matt, great video as always. I made every one of those mistakes on my first build but I guess that's how we learn isn't it, that feeling of seeing glue show up after staining is just the worst isn't it but it sure makes you more careful on the next build! Applying masking tape around joints before applying glue can certainly help prevent nasty surprises! For those like me in the UK Rustins make a pre stain conditioner available from Amazon 👍 And as per another comment I also use teabag water which adds tannins to pine for a nice natural colour change. I leave two bags in a jar of water (doesn't have to be hot water cold works just as well) for several hours at least and just paint it on with a foam brush.

@brendandowling3485 Год назад

The scenario of the used rags spontaneously combusting actually happened to me albeit involving an autobody shop. My car was in the shop for a bumper repair and the owner of the shop, who lived nearby, was varnishing his stairs after work. For whatever reason he decided to dispose of the rags in the garbage in the shop that other rags with oils and other car related chemicals were thrown in. That night, the rags combusted and burned down the whole shop with my car inside. My car was in the paint part of the shop with its own fire suppression so it didn't completely go up in flames but the white car came out looking like a roasted marshmellow. A nice golden brown color. I actually walked away from the whole ordeal with a new and nicer car for less than the car that was in the shop. Other people's cars outside of the shop were completely burned to a crisp unfortunately.

@ahmedalsanea6079 Год назад

finally a good video other than product videos

@joepangean6770 Год назад

For the clamp pressure marks, use a dampened rag and a hot iron to run over each depression. The steam will swell the wood fibers back to surface. Then do the sanding phase as typical. This trick also works on dents especially in softwoods.

@dymarke 7 месяцев назад

Regarding dry glue under stain, I use hide glue around finish surfaces whenever possible, even when dry it will clean up with water and doesn't show through stain. Also when staining I keep 220 sand paper handy and often you can wet sand the stain to make the glue spot disappear. It doesn't always work but its worth a shot to save a lot of work. Thanks for some great videos

@haroldraceedge1168 Год назад

Lacquer is the choice of furniture makers. Dry time and Durability are the some of the reasons. I have used Deft Lacquer for years and have had great results spraying and brushing. Love the content, God Bless 731woodworks!

@Boog7625 4 месяца назад

Great video. One thing I suggest when spraying lacquer. Start spraying close to you, know continue your pattern across the table. When you do this, any overspray will melt back when you continue on spraying as you move forward.

@katieleonard6391 Год назад

Thank you! That answers many questions of flaws I've found on my projects. 👊

@mertz7305 2 месяца назад

Thanks for the tips brother. Love your shirt.

@jeffvoght1632 5 месяцев назад

Man! I wish I had watched this. You said you will have hurt feelings... I started crying! Lol! Everything that I shouldn't have done... I did. I tried to sand it out. It was nearly impossible. I learned something the hard way. Great video.

@Bobbyg2018 Год назад

I think this is the most helpful video I've seen of yours...and I've watched many of them! Thank you.

@731Woodworks Год назад

Glad it was helpful!

@IMAGINECREATIVITY-of7rj 4 часа назад

Very nice 🎉

@toddsanford7757 7 месяцев назад

thanks for not being annoying like most youtube videos these days. what kind of wood screws do you use? thanks for helping us new to woodworking.

@scottbionicnerf8727 11 месяцев назад

I'm a Body Repair Man by trade. I live to sand.😎 I tell you from experience, even if you blow that sanding dust will be in them corners and crevices if you don't use a rag/towel along with the compressed air, then go back and double check for lint, and try not drip any sweat on it while you're at it.

@danwillett4481 Год назад

Good call on mentioning the rags catching on fire. I'm a professional painter and I've seen it happen to a few guys in the trades. I like to sumerge mine in a bucket of water

@chrissnyder4439 4 месяца назад

I know it was just for demonstration purposes, but I did giggle when he placed them on a bunch of dried leaves and pine needles.

@KingsFineWoodworking Год назад

I definitely love that Deft Satin Lacquer, probably my favorite, and definitely one of the easiest and most forgiving finishes. Great video!

@731Woodworks Год назад

Thank you!

@ahdam82 Год назад

Your real good at what you do. I just got a 45’x24’ workshop and I’ll put you on my flat screen while I’m working!

@fencepost5369 Год назад

Hello Matt thanks for the time you take showing and teaching about woodworking etc you make it simple to understand and very informative sincerely wishing you n family the best God Blessings to you folks

@bonedaddy6583 6 месяцев назад

I consider myself a better finisher than builder, but I’m always learning, thank you very much. Years ago I turned a small store bought “pond” into one big enough for me to float around in and I was clueless. After watching video after video I found videos of what not to do. They helped tremendously, I rarely pass on videos like this.

@rrjohn5 11 месяцев назад

Newbie here...spray on laquer! Mind=blown!

@frankfaherty2065 Год назад

Matt, New to woodworking. I really enjoy your videos. Very informative and easy to understand and apply. Keep up the good work. Frank in Missouri

@ocdtechtalk Год назад

P-gun with a little bit thanks for hitting on the lacquer. I'm looking to make some corner shelving for some pots and pans instead of keeping them in my cabinets and I was worried about marring up the finish with the you know abrasiveness of the bottom of the pan. I was going to use polyurethane to seal it and to get some protection but I'm definitely going to use lacquer now. Appreciate it.

@adaptivediyers Год назад

you are spot on with your wood glue/stain outcome

@FreedomNetwork99 5 месяцев назад

Great video. I learned so much from this single video. I've watched about 5 videos prior to this one. Thank you for sharing your knowledge.

@halsonger1317 Год назад

To really get a smooth finish with lacquer, give the final coat a couple of hours to cure and then crumple up some craft paper or a brown paper sack and buff it lightly. That will smooth out any tiny nibs that might have popped up from dust (or pollen if you are spraying outside) and make the satin finish even more satin-y.

@NeilSedlak Год назад

I picked up a tip to use white 3M scrubbing pads. I use one to hand buff between each coat, and also on the final coat, and the difference in smoothness is very noticeable. I'd only use sand paper if I had to fix a run or remove something stuck in the finish.

@DayTrader__ Год назад

I’m going to stick to 731’s tips 😂. If you guys make a video of your tips to show us let us know! I’d love learning but I’m a more of a prove it to me kinda guy than a type it in and I don’t know what’s gonna happen! Hehe.

@scottswannie2500 Год назад

I’d agree. Matt confirms it.

@scottmorris4914 Год назад

@@DayTrader__ Test it. Why not. There are going to be lots of things you will want to do, and should test it first.

@AfterBurn65 Год назад

This does work

@kenerickson4923 Год назад

I like to use the Starbond pump activator instead of the aerosol version. It is much more economical.

@MrsEarth-pf4cr Год назад

Thank you so much

@rd1084 Год назад

Deft lacquer is excellent. Have used it a lot on furniture repurposing.

@JasonPeltier Год назад

I used to use only the spray cans. Now I buy it by the gallon and use a Critter sprayer. So much faster and cheaper.

@JGWoodCraft Год назад

I feel like you’re on the right track about lacquer but if you’re going to use a hvlp or a lvlp spray gun to spray go ahead and get precat lacquer from Sherwin Williams. It is much more durable and does not fog up on you like brushing lacquer. I started off spraying mixed down brushing lacquer and it’s not even close as to using precat lacquer. Also when thinning down lacquer consider using Acetone it will speed up the drying process. Hope this helps

@camerannC 2 месяца назад

Thank you so much!

@truckinwoodworx1436 Год назад

0000 steel wool pad and paste wax also help get an amazing smooth final finish 👍

@danalaniz7314 Год назад

, Excellent video. I wish I had seen this when I first started. I've made all of these mistakes but I still learned some tips from this video. Thanks!

@haydenfrench8493 2 месяца назад

So glad I checked out your video, it is EXCELLENT! Learned a couple of tricks particularly the contoured pad. I’m a pre-pre novice attempting to sand and finish my basement stairs so learning as much as possible before embarking. God bless.

@LiftRanger Год назад

Thank you, Matt.

@Pascosuburbanhomestead Год назад

I just bought these plans and this is a project me and my two boys are building now. Thank you for the very informative videos.

@bobgregorasz7685 7 месяцев назад

Damn it, that q-tip, tip, is SO obvious and yet NOT something I ever thought of! Thanks!

@brettbarager9101 4 месяца назад

Good vid! I have been staining things for years. Good to know i have been doing (most!) things right! I really appreciate your deliberate mistakes. As a visual person, actually seeing the mistake is more concrete.

@watermain48 Год назад

Very informative. Thanks Matt.

@jesterraj Год назад

Caribbean viewer locked on....luv the tea...

@juancolina7015 5 месяцев назад

Thanks for sharing! Great advice...

@DayTrader__ Год назад

Man, I just love your informational videos!!! God Bless Friend!!! 🙃

@731Woodworks Год назад

I appreciate that!

@small.garage.woodworking Год назад

Great video. I feel like I made each of these mistakes when I started woodworking. Sometimes we learn our best lessons from our mistakes.

@scottrisch9233 Год назад

Thanks Matt I have always done polyurethane and have never been satisfied with the finish going to try laquar

@kelvingoliday9245 Год назад

Save or buy a metal paint can for your combustible rags. I seal them inside to contain flames if it happens and also limit oxygen. Then, take them out and throw them away on trash day.

@mikel4510 Год назад

Put oily rags in a bucket of water with Dawn dishwashing liquid for 24 hours, then dispose in accordance with your local ordinances.

@victorfernandez915 Год назад

Very well explained and very professional, thanks a lot!

@frankd8180 Год назад

Thanks for the info - always learning ! Be safe 😎

@thenext9537 Год назад

For the CA, I use starbond as well. If you are doing knotholes, I suggest if it's big enough to do a seal coat, do it. Use cheap thin foam brush, seal coat and spray (very thin). What happens is it will bubble on you underneath if you just pour without seal (typically, not always!). Starbond will say one drop per square inch at most. This means it's not deep pour, so on a 1/2" knothole, if you pour it in there then hit it with the spray to set it you will get bubbles UNDERNEATH. What I suggest is you wait about 5-10 minutes and if a bubble appears hit it with a heatgun or a quick pass with a torch. Rinse and repeat for about 20 minutes or so, then set it and that normally is good.

@Mosa-166 Год назад

Beautiful! very informative.

@febeleven 11 месяцев назад

Great tips and Thank You!

@731Woodworks 11 месяцев назад

Glad it was helpful!

@Ericrutledgebetter Год назад

Love your channel and thanks for sharing all your info. Plus, I see your shirts. God bless brother!

@stephenstanley9500 Год назад

Really enjoyed the 2 instructional videos on this table.I learned a lot.And some things that made me think"that's why that happened." Thanks

@731Woodworks Год назад

Glad it was helpful!

@adkgaladkgal1799 Год назад

Thank you I will definitely try the lacquer looks great. Polyurethane has been my go to. I used to think lacquer left a yellow haze. I will try the spray. Thanks again.

@larrybrown1824 Год назад

Nice vid. Thank you.

@adaptivediyers Год назад

lacquer is a good choice for the top, but i recommend shellac for a good sealer. Not in a spray can, but with wax. thats what seals it. Usually from a quart. Brush it on with a foam or horse hair brush

@robertrohler3644 3 месяца назад

great educational video. thank you keep up the good work

@jimtongas821 Год назад

Awesome tips. Much appreciated. 👍

@GoMandiMartin 7 месяцев назад

This is so great! Thanks a million! 😀

@bellagirlgirl8827 6 месяцев назад

EXCELLENT!! thank you!!

@Sebastopolmark Год назад

Hey Matt, that's a GREAT video. If we start with proper techniques when learning a trade, it will carry through as we grow. A simple stool it the perfect project to "test" your skills. Cheap-er to build, you end up with a usable project. Thanks again! !! !!!

@dinacusic7829 Год назад

My alternative to the pre-stain is to use a black tea "stain". Boil 1 cup of water, pour the water into a sealable container like a mason jar, add 10 bags of Black tea and let it steep for 1 hour. Let it sit for at least 12 hours before use. Apply with a sponge brush. The big caveat is that it WILL get moldy over time, so maybe refrigerate it between uses. It helps even out the color of the stain you'll use and is best for reddish or dark stains. I've never tried it with a light color stain.

@dinacusic7829 Год назад

I've had great results with this for stove top covers and shelves I've made

@JasonPeltier Год назад

I use this on pine for the weathering "stains". They work with tannins and pine doesn't have many. Black tea to the rescue!

@lechat8533 8 месяцев назад

You just gave me some information on Lacquer that I need to know. Thank you very much :)

@johnisley4578 Год назад

Very informative once again, Cheers

@kevinweaver4265 Год назад

Matt, Nice video. If you are using " 2" By material" from big box stores, the wood species you are most likely using is actually Spruce or Douglas Fir, not pine.

@jeffhester1443 Год назад

Great video, thank you. The colored superglue is something I have to try. Clear glue is visible even dabbing stain under it first.

@radicallyforjesus Год назад

I really needed this video.

@DirtDiving77 9 месяцев назад

Thanks!!!

@tonydamian4896 Год назад

New sub from uk, great vlog thanks for the advice on staining, as they say we learn every day, the stain on the rags im sure when rolled up and bin tossed can act as a catalyst, heating up on curing, ive seen this happen before with contact adhesive, catches folk out. Stay safe & blessed

@westsideslide5873 Год назад

those colors look good together

@solavisa Год назад

This is a very helpful video! Thanks! And, thanks for explaining all the reasons why you should fill in a knot hole with wood glue! :)

@johnmiranda2307 8 месяцев назад

Excellent!!! Thnx.!

@gravetotkd Год назад

I love the advice about used rags. "They can self-combust". Let's go outside and put them where there is a ton of dry leaves and pine needles. Just kidding. Great video on finishing pine projects. Thank you.

@michaelfernandez2254 Год назад

Burn em in a fire pit, problem solved

@fishhuntadventure 7 месяцев назад

4:17 I don’t sand edges with a machine/electric sander- especially on softwoods. I use fine sandpaper wrapped around various harder and softer rubber blocks. This creates a flatter, straighter surface without risking variation in the texture or appearance. This is how auto body professionals get perfect looking panels and edges. It only takes a minute or two and that’s virtually the same time an electric sander would take. As a professional that’s the method I’ve been using for interior trim, doors, furniture, and kitchen cabinets for 30 years- even ‘soft’ edges come out clean and straight every time 7:14 I think the process of applying stain does have some ‘tricks’ to make a project come out looking better. While it is true that there is no film thickness benefit with flooding on stain finishes like there are with ‘oil’ finishes, using a nice-quality china bristle brush makes the work go quickly and then you can use the brush “unloaded” to pick up excess and return it to the can but more importantly leaving an even, visually appealing color distribution. Wait a few minutes and rag off any pooling in corners or molded edges and you’ll always have well above average results.

@RidgidRon Год назад

Thank you for sharing information and especially the safety part. Us garage expeers sometimes forget about that info.

@bushrat Год назад

Very complete and well presented

@731Woodworks Год назад

Glad you liked it!

@nicoson9578 Месяц назад

thanks fior the Vid gave me some insight of what i need to do but i had a question.....Can i use the lacquer on stair steps? will the lacquer hold from the traffic?

@wolfman75 Год назад

Awesome Tips!!!! Thank You!!!!!! Much Appreciated!!!!👍😎🤯

@1brokenbychrist 9 месяцев назад

Excellent!!!

@731Woodworks 9 месяцев назад

Glad you like it!

@krishisel5316 Год назад

In terms of getting rid of rags with stain on them, I lay them out flat on the concrete on a piece of painters plastic. It's my understanding that one of the main components of the self combustion is having the rag "wadded up" trapping fumes in. If I'm wrong on that someone please correct me.

@3frogltd987 Год назад

You are correct. I hang rags with stain or oil finish (especially containing linseed oil) around the rim of a 5 gal pail out beheind my garden shed. If the rags are flat, not wadded or stacked, and exposed to air, they will safely dry.

@Taitius Год назад

Stain does not contain any polymerizing or "drying" oils, therefore there is no significant risk of combustion without an outside trigger, such as a spark or other heat source. There is certainly nothing wrong with laying flat to dry out, but they won't self ignite.