A Comprehensive Guide to Cutting Dovetails - Tips and Tricks Galore

Подписаться 549 тыс.

Просмотров 628 тыс.

50% 1

Get the Katz-Moses Magnetic Dovetail Jig here: lddy.no/stiz
Holiday Dovetail Challenge: bit.ly/holidayIGdovetailchallenge
This weeks woodworking joint is a comprehensive guide to cutting perfect dovetails. I’ve included everything I know about cutting dovetails and all the tips and tricks I’ve learned over the years. Let me know in the comments what joint you’d like to see next week. Thanks for watching! Please like, comment and subscribe. Cheers!
Read the blog on this video: kmtools.com/blogs/news/guide-...
----
Buy the Katz-Moses Dovetail Jig: lddy.no/stiz
I have Walnut Slabs for sale: lddy.no/stj0
Buy The Katz-Moses Stop Block: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Best of Katz-Moses Woodworking Video Playlist: • Making a Modern Bar St...
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
New Flush Trim Saw: lddy.no/stix
Dovetail Saw: amzn.to/2xi5EUV
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
¼” Inexpensive Router Bit Set: amzn.to/2JUPrJB
½” Inexpensive router Bit Set: amzn.to/2Abyhrq
Whiteside ¼” shank Spiral Upcut Bit ⅛”: amzn.to/2LDw6S1
Whiteside ¼” Shank Spiral Upcut Bit 1/4”: amzn.to/2uNanxA
SUPER MEGA FLUSH TRIM BIT ½” Shank: amzn.to/2LyH1wr
SUPER MEGA FLUSH TRIM BIT 1/4” Shank: amzn.to/2JWMFDx
45 Degree Bit I Like: amzn.to/2JRNNII
Whiteside Inlay Kit I like: amzn.to/2JV0DWp
Flush Trim Bit I Use All The Time for smaller applications: amzn.to/2uPrvCC
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
Bescutter Laser (awesome c02 and fiber lasers) Website: bit.ly/bescutter
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM #jointoftheweek

Хобби

Опубликовано:

5 дек 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 461

@katzmosestools 5 лет назад

Check this out: Holiday Dovetail Challenge: bit.ly/holidayIGdovetailchallenge

@Garlic46227 5 лет назад

I think the opposite of proud is "humble"

@stallionranchwoodworks 5 лет назад

Are you not selling your jigs anymore? Went to your site and could not find them.

@fadingfromfocus 4 года назад

@@Garlic46227 I think in the case of building the opposite of proud is shy

@fadingfromfocus 4 года назад

Hey Jonathan, I just wanted to say I really enjoy and appreciate your content. I was wondering how you like the Stanley sweetheart chisels? I have the same set and am not quite sure about the consistency of hardness throughout the set, also a few of mine are bellied which I havent had the chance to flatten out yet.

@koalafan1576 2 года назад

I have a very important question. Why do dovetails have tiny tails for big pins? Can we essentially make them the same size? Ah, got the answer at 4:43 where you said “however you want to space them” so why do you always do tiny tails? I’m really curious as I want to start learning to cut them. I ordered your 8:1 and 6:1 jigs right before I stopped woodworking in 2019 so I haven’t had a chance to use them yet. Come January I will start the hobby again. @Jonathan Katz-Moses

@chadryk5 3 года назад

Man, I've learned SO MUCH by watching this vid. After trying my hand - COMPLETELY FREE HANDED, and without the proper tools - so much of what you explained herein made sense. You're a good teacher. Thanks much for sharing your knowledge! By the way, Your dovetail jig looks like an answer to my immediate woes. Again, humble thanks!

@Senluis13 4 месяца назад

The author does like to from scratch, ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

@steverochon1620 4 года назад

In general, your channel is becoming a favorite. In this video, so many demonstrators don't show the necessary corrections. Everything is square and tight, but you take the time to show how to deal with (my) reality. Thanks for your work!

@barkingshark6413 3 года назад

Nice how you admit your mistakes Jonathan and not edit them out. I make dovetails on everything for years and still make mistakes once in awhile. Well done.

@UniversalHuman7 21 день назад

Wow! Truly incredible work

@gandjboyd7872 5 месяцев назад

Great video , I just bought my 1st Japanese dovetail saw because I want to do some hand cut dovetails last time I did them was 40 years ago back in high school time to try again

@GregsGarage 5 лет назад

Easily the best dovetail video I've seen. Bravo.

@bobjohnson2089 2 года назад

This video was worth it just for the reference to KM Tools. Hand cut dovetails my next project. I restore antique furniture, Have always admired the craftsmanship on the dovetails.

@ihadabadday7709 5 лет назад

Thank You , Mr. Katz - Moses, Hope this is your best year ever!!!

@trueleyes 5 лет назад

Oh by the way; I just received your dovetail guide today and I already did some work with it. What a difference. Great Tool! Thanks.

@jlucas42 4 года назад

Excellent comprehensive guide and the inspiration that I needed to get started! I just picked up a dovetail jig from your store, so hopefully sometime later this week I'll get to try it out!

@MrSkunky2009 2 месяца назад

Fascinating & so insightful...HOOKED !!!

@andywaterman1285 3 года назад

Yeah Noah

@jochanan2137 5 лет назад

Awesome tip Katz, with "my" dovetails, I will be keeping the saw dust for my spaces. Great video thanks for the lesson!

@jimbo2629 5 лет назад

The rebate is a great improvement. Testing with the square also is new to me. Also using the jig to ease the pins is good too. Also collecting the sawdust. In fact a very detailed video. The only one I’ve seen that deals with imperfections.

@thomasparkin259 4 года назад

Great tutorial! I love picking up comprehensive info on woodworking! I hope to be as good as my father one day, the man had a natural talent when it came to woodworking and prided himself on fine clueless dovetail joints.

@msgajhimelret9496 5 лет назад

Thanks for posting, great demo... as practice I plan on doing the workbench with Dove Tail corners on the upper trim.. into 2X4s and round the corners off... HA!!

@hansangb 2 года назад

Ordered the jig, the saw, and the alignment board. I don't think I need the board but it's the best way to support your channel. My niece is getting married and I want to make her a killer jewelry case.

@SymbiotAlpha 3 года назад

came here for joint of the week not what I was expecting but I did need some help with my shitty dovetails so it worked out.

@theunisolckers7996 5 лет назад

Thanks for not having ridiculous shipping costs on your dovetail jigs. I have both on it's way to Australia :) keep doing good stuff man I love your channel

@Tac0caT0 3 года назад

Bout to make a dovetail bench out of some leftover 4x12 bits from a job!

@BespokeCarpentry 4 года назад

One of the cleanest dovetails I've seen. Definitely some serious skill man. Help me make my first dovetails.

@hawkercnc8261 Год назад

Great stuff, many thanks. If the saw blade is well supported by the magnets what about a simple 90 and 45 degree version for regular carpentry and a long scarf joint perhaps. Also routing in door locks with deep holes that need to be parallel to the face of the door. What about an accurate universal steel base plate to which you attach one wide or two less wide guides by magnets to keep the router exactly at right angles to the door face. One each side to finish each side exactly where it needs to be to fit the lock.

@timothydaniels504 2 года назад

Your tip about factoring in the set of the saw teeth is something I’ve never considered before. Thank you. Just purchased both of your dovetail guides. Tamar’s video was the clincher!

@smoogleville8201 4 года назад

Masterful dovetailing -love the rabbetting idea - inspiring stuff.

@magicconsulting 3 года назад

My folding saw and 2 jigs arrived this morning in Niagara Falls. So excited to cut my first DTs tomorrow. Thanks for making insanely high quality products and videos!

@SmallWorkshopGuy 4 года назад

Another great job of teaching and including all you little tips for making it look good.

@purje7 5 лет назад

Discovered your channel recently, really informative and entertaining content, thank you!

@trueleyes 5 лет назад

Jonathan I was watching this video again (I never get tired of it) and I thought of something that I learned as a apprentis many years ago here in Los Angeles in Local 721 Cabinet Maker Union working for German shops. Our finishing team of German finishers would take Dap tubs and cut them open, empty them into container and using dies would adjust the color to the exact shade to the hard woods we were working in. Crown Molding for example, back then we screwed them in place with the old Robinson head pin head screw to the metal studs behind the dry wall. Later we changed our installation to just screwing a cant strip to the dry wall ceiling corner and then panel adhesive and gun nailed the molding in place. Point I'm making here is that we too used our sawdust with glue as nature filler, that is a very old method as I am sure you already know but I am sure that you like many others I see on You Tube work with very exotic woods from time to time and this method just might come in handy some time. I hope not but you know, _ _ _ _ happens. Love to watch a master at work.

@dudeguy8351 4 года назад

stay safe in the shop, wonderful message.

@incognitotorpedo42 5 лет назад

Wow JKM, this is a great video. I'm approaching the third hand-cut dovetail joint of my life, so this came at a good time. BTW your videography and editing is superb. Thanks for all the tips!

@ptcruiser2012 2 года назад

I honestly think this is your best video. After watching this I bought the saw, the jig, and your amazing apron among some other items. Very happy with all. This is way to do dovetails. Full stop. You are an excellent teacher and your store is very well curated and priced very fairly. The products you have made on your own are very well thought out and visually very appealing. Well done Jonathan. I am proud to wear your banner on my new apron.

@chubbibots 3 года назад

i am not quite at this point in my woodworking career, but i will definitely come back to this video when that time come! thank you!

@doggyrabbit1128 5 лет назад

the most excellent tutorial I've ever seen. The best part is that you haven't done it perfectly at the first trial, but tell me a lot of methods to fix it. Thanks a lot

@designer-garb572 4 года назад

Excellent clear instructions as always, one day soon I will try this.

@JonnyBuilds 5 лет назад

You're such a good teacher!

@katzmosestools 5 лет назад

Thanks JB!

@seasawwoodworking 3 года назад

I’m prepping to do my first hand cut dovetails with your jig. Your tutorial makes it look easy, so wish me luck!

@allenhess6583 4 года назад

Great video. Well narrated and you included all the tips. Thank You.

@timbarry5080 4 года назад

I love that scribe line. It looks great on the wood you used. I've seen it done before but never did it. Next time I will. Great video. Thank you. Also, I had a book by a famous Japanese woodworker who you no doubt know but who's name escapes me. He showed a corner joint where there was full end grain on both sides. Please consider doing that in a video. This way I can live vicariously through you as I never got around to trying it. Thank you.

@JoeKrol 3 года назад

Just purchased the Katz-Moses jig in 8:1. Very impressed. Also just got a bunch sand paper for the scary sharp on my chisels. Love your Chanel thank you.

@Expedient_Mensch 3 года назад

About the saw dust trick; You need to be sure that the species of wood you are using does not go black or dark blue when you mix it with water based glues. I have had that happen to me a few times, especially with gum tree woods and it's a real bummer on an otherwise great piece.

@Ragingmarmot 2 года назад

Love that little workbench

@alejandroferreyra6120 3 месяца назад

Excellent video Jonathan

@GARRY3754 3 года назад

Files, of course. What I saw Sam Maloof do with file is amazing......thanks for sharing something concrete and relevant

@richardwright4782 3 года назад

Great video. Very clear and easy to follow. Never tried hand cut dovetails bot I'm anxious to try it now

@stevecunningham936 4 года назад

Just got your jig can't wait to try it!

@aaronfenwick7704 5 лет назад

The marking guide looks awesome. Going to hit up amazon and find myself one.

@abhisheksharma4742 3 года назад

Awesome video! Purchased your dove tail jig last Month! Can't wait for it to arrive down under!

@ABuffaloDub 3 года назад

Dude this was awesome. You are an excellent teacher. Thank you !

@TrevorDennis100 5 лет назад

That was really useful. Thanks for the tips.

@barkingshark6413 4 года назад

Couple of good tips in there, thanks.

@stufarnham 2 года назад

Easily the best tip I picked up from this video was using the set of your dovetail saw teeth to set your saw kerf to sone side or the other of your line. Genius! Why has no other dovetail video I have watched mentioned this???

@brinjoness3386 5 лет назад

Joint of the week. Come round to mine on friday arvo, bring some beers.

@harrybond007 4 года назад

Some really good tips in this video, explanations are very well done

@xtremepowerpaul 4 года назад

The best I've seen about dovetails. And I've seen MANY. That ribbet changes all the game. Thanks. 👌🏾👌🏾👌🏾

@bobfugazy4916 2 года назад

Nice Jonathan, thank you. My kids bought me a set of the Dovetail alignment jigs for Christmas. I'm about to go use them. Best wishes.

@u.sonomabeach6528 3 года назад

Finally it's making some sense! I just had to find your channel! Subscribed

@codybryant8684 5 лет назад

Just got my dovetail guide today unfortunately i cant use it yet because i had an emergency surgery so no shop time till February but im super excited to have it. I wanna use it to learn muscle memory

@grahamparsons6620 5 лет назад

Great video once again, a fantastic tutorial for anyone wishing to learn how to dovetail. Between you and Matt Estlea you've got this skill buttoned down 👍👍👍👍

@katzmosestools 5 лет назад

Thanks brother!

@user-pn6mv4wy7w 3 года назад

I just bought your jig, I can’t wait to use it on the nautical galley table that I’m about to start.

@philipswain4122 4 года назад

Great tips. Thanks for posting

@thomascostello5780 3 года назад

best dovetail joint video ever!! TY

@TheCaoimhin2 4 года назад

This is the best and clearest tutorial that I have found, and I have seen them all. You answered all my questions and now I know how many mistakes I made and why my dovetails are so awful. Great work. Thanks. Just ordered your dovetail jig and guide board. Happy days!

@katzmosestools 4 года назад

I can't wait to see you create bud!

@2102jeffrey 5 лет назад

That was excellent. Big learning here.

@darwinpaz4774 5 лет назад

Great video I will bookmark for reference! Cut my first two sets which were very rough. Purchased your guide which is absolutely fantastic and made all the difference in the world for me. I keep my incremental attempts so I can see the progression, and you can see a great leap in perfection once I bought your jig. With the addition of the tips and tricks in this video I am closing in on some nice looking joints. Thanks so much for the training aids and videos!

@katzmosestools 5 лет назад

I really appreciate the kind words my friend! I can't wait to see what you create

@markheld5788 4 года назад

Your a good teacher first time ive seen your video .

@MrAmw1 4 года назад

Awesome tips and tricks thanks 🤜 just ordered your 6:1 jig just have to wait for shipping to the UK 🇬🇧 lol I'm patient it's worth the wait. Thanks buddy

@rodneybosch7290 8 месяцев назад

Well I'm going to try it.

@JkCanvas 5 лет назад

great video tutorial on how to cut dove tails. Thank you for making this look not so hard.

@crappo8459 5 лет назад

Great job nice clean work

@andrewgibbons8159 3 года назад

Great video thank you. !! Really appreciate it.

@linuxjcajca7806 5 лет назад

Good job, thanks for the video.

@SkylersRants 5 лет назад

I’ve been watching dozens of RU-vid videos on dovetails and this is by far the most informative. Thanks.

@katzmosestools 5 лет назад

My absolute pleasure bud!

@TheJmh19 5 лет назад

great video. I learned a lot from this. thanks

@meghanihamid Год назад

Great video and explanation

@StraightWhiskey9 3 года назад

Probaby the 5th time I have watched this video and its just as good as the first. Ill be making a video on my first time doing dovetails soon. Thank you for the tips

@MakeBrooklyn 5 лет назад

NIce ... all the tricks all in one place!! I just got that same set of Narex 1/4 skew chisels and I am digging the hell out of them, especially for cleaning out the corners of the pins on half blind dovetails!!

@katzmosestools 5 лет назад

Yea they are so awesome!

@itsblowecuz 5 лет назад

You and Chris would be amazing together!!!!!! This video is perfect timing so I can start on the challenge 🤗

@katzmosestools 5 лет назад

I can't wait to see what you create bud!

@paulcompton123 4 года назад

Exceptional work.

@dan00017 4 года назад

I build custom Puzzles, and I’ve never cut a Dovetail before...want to incorporate them into my next Project. Looking forward to purchasing a KM Dovetail Jig and Saw. Thanks for the video, man!

@thomasgallagher5301 5 лет назад

Just received your dovetail jig. Also the dovetail saw and Stanley 750 chisels that you use. Can't wait to get started making dovetails. Enjoy your videos iv learned a lot.

@TheTranq 4 года назад

Well, time to give it a go!

@gregorysmith8025 5 лет назад

Lots of great advice on dovetails. Now I want to put it to use .... Thanks

@katzmosestools 5 лет назад

I can't wait to see what you create bud

@AdamCraigOutdoors 5 лет назад

kinda new to wood working so this was fun to watch!! Cheers Jon!

@katzmosestools 5 лет назад

Welcome my friend!

@Vman7757 5 лет назад

Wow thanks for sharing. I love watching your Videos.

@katzmosestools 5 лет назад

Thanks Vincent!

@fontking1a 4 года назад

The time it takes to do this is amazing. This is one of four corners. We're looking at two hours minimum to do a four cornered drawer. WOW!!

@katzmosestools 4 года назад

If I'm not shooting a video and teaching I can dovetail a whole drawer in 20 minutes

@NEFdaily 3 года назад

Dude amazing great video

@acapp3004 4 года назад

Nice video...learned a lot.

@stefanopatteri5171 Год назад

Just get mine dovetail jig!!!

@thump72 5 лет назад

Thank you, the tricks and tips help.

@katzmosestools 5 лет назад

My pleasure Daniel!

@shurley96 4 года назад

I haven't made a dovetail since I was 15 in woodwork class! Any time any of the guys used the sawdust and glue technique our teacher gave out to us - funny to see how it's actually a legitimate thing!

@JkCanvas 4 года назад

I have bought all but the frett saw and low angle jack plane.

@jonikuhn2441 5 лет назад

Great tip on taking the set of the teeth into account. I never heard that before, looks like I have to give dovetails a try again.

@katzmosestools 5 лет назад

Go get'em Joni!

@SmallWorkshopGuy 5 лет назад

Man, you do some great content! Very, very helpful! Your views and subscriptions should start to really, really mushroom soon. Please keep doing the superb stuff!

@SmallWorkshopGuy 5 лет назад

I highly recommend your Dovetail jig. I have one and love it. Waiting for your hold down device to be delivered - looking forward to doing a new crosscut sled and incorporating your hold down.

@katzmosestools 5 лет назад

Thank you so much bud!

@hugodesrosiers-plaisance3156 3 года назад

SCOOP OUT THE MIDDLE. Omg. Thank you.

@tomlagatol4448 5 лет назад

Good vid, Enjoyed it all! Thanks.

@katzmosestools 5 лет назад

Thanks Tom!

@scottstennes6983 5 лет назад

Watched this.. practiced. Failed. Watched again... practiced. Not too bad. Tonight watched for third time... hope tomorrow’s practice session produces dovetails that I can be proud of!

@katzmosestools 5 лет назад

I can't wait to see what you create!

@ManCrafting 5 лет назад

How do you get out so much high quality content so quick? Great tips as always.

@katzmosestools 5 лет назад

12 hrs days starting at 430 am hahaha

@ManCrafting 5 лет назад

Katz-Moses Woodworking Shop I hear you. Mines at least that, just not getting time to film and I’m not doing videos on production. Not interesting to anyone.