A Hand-made 3G Gun!  A Powerful Antenna for 3g, 4g and WiFi DIY ! 

I built this antenna and I'm getting around 10db improvement on my phone signal which is quite nice given I'm using exactly that wrapping technique he is using and not plugging it in as an external antenna. I do suggest using a voltmeter to check that the disk on which you soldered the cables and the other end of the cable have continuity. That way you know for sure whatever signal your 3G/4G gun is detecting is being sent down the cable.

It's a strange feeling to watch someone have such a firm grasp of the engineering topics that are my weakest points.

You guys are the best!

Much more details than the previous GUN

Every body gangsta until the USSR engineer gets better speeds with a custom made antenna and a *3g* sim than your ADSL.

Awesome videos dude! You are very smart and inspirational. The world needs more people like you.

Literally rewatched the first wifi gun videos yesterday, lol

Thanks! I finally can communicate with my family back home in Andromeda

That's insane! I should really try doing this myself, I have -100dB normally.

I did this and really got improved for 4g lte speed from 30mbps to 60mbps. thank you sir.

Cool, I'm putting a 196.3×81.7mm waveguide antenna right now with a little bit of an experimental ground reference plane. Just need to cut and attach the front of the guide, but so far everything matches the nominal layout to a tolerance smaller than my eyes can resolve so I'm excited about this one. I've also ordered some short path connectors so I can cut the signal path from the reciever to the modem down to the lenght of the actual element, and usb can handle the signal from there as it works without percieved loss. My setup is for 2.437Ghz or chan 6 (us).

the voice over is insanely fun!

imagine being friend with this guy and you can visit him daily? I wouldn't miss a day

Well done guys, this should silence your doubters. ...........Kreosan 10.....doubters 0. Much better video this time. Keep up the good work..😎

Looks like a good idea, some of those speeds are faster than what i am getting although I am paying for the lower speed so that is fair enough. I liked the clock in the background it reminded me of one of those Radium painted dials.

You're awsome! Greetings from Poland

I've never seen any 3G connections work faster like this! Thanks for demonstrating.

NICE antennae!... but that truck stole the show!! хорошие антенны! Но грузовик украл шоу

Thank you sir. 100% working. Good job sir. God bless you.

this vid inspire me to create same antenna from pcb board because in my region hard finding those copper sheet thanks a lot

Could you please let me know the setup configuration for 2300MHz for 4G signal. You have awesome knowledge of network and I really really love it. Keep making these type of videos. Thank you.

This works well with the indoor coaxial nodes tied perpendicular to each other and placed beneath my phone. Now, is there any way to create indoor unit to broadcast signals wirelessly indoors..?

Hey guys, I'd like to know how you came up with the dimensions for these antennas? Did you used some software calculator or some formulas? I would like to know as I am going to make an antenna with specific frequency for my 4G LTE provider.

You guys are honestly the best ducking thing on the internet

this is the first time for me to comment on youtube video but this one really deserve, i built this antenna it is really brilliant, it made the signal strenght always 75% instead of 25% or 50% using normal router antenna, i am just wondering how can i improve more in the antenna so that i can get 100% signal strength 1- i used RG-6 coaxial cable "length isno exceeding 12 meters" 2- if we used more than one antenna will it help ?

Can you make 4 Guns simultaneous and orient them to the 4 cardinal points? I think it will cover most signals for 12 km radius, and you will have signal from any direction, or will it interfere with each other?

what app did you use to see all the base stations on the map?? Nice video anyway! :)

I'm from a vilage that so far from my town. No internet connection in my vilage. Thanks for your show. I want to make my own boster. Can you show clearly me all of spesification of materials?

very interesting. Is it better the threaded rod is made from metall or plastic?

Great video and thanks for that app for easily locating your network towers.

you are awesome dude, greetings from Canada.

Also use 50 ohm cable good quality keep lengths as short as possible and use 50 ohm connectors as tv n satellite are all 75ohm , lte is 50 ohm

I'd love seeing the calculations behind it; great Video

Very nice video. What is the name of antenna. How do you calculate this is there any formula. Pls let me know.

Could you use one of these antenna designs to make a drone-Killing Kalashnikov Gun? Basically send enough signal out at a drone operating frequency to make it lose contact with its pilot?

Woah!! Fantastic channel subscribed, i bought that modem too even before this video :):)

You need to isolate tye driven element i.e 2nd largest disc from all the others discs , otherwise your vswr will be veey high , yes itll work with low power but u can damage your router , simply insulate tue driven element and its very important u do this as its not covered in this video

Some of the best inventions are built out of necessity.

the second disk, the supplier, needs to be insulated from the rest. If you put on amp it will blow amp.

you actually created a short on your yagi. The 2nd large disk needs to be isolated from the main nut and screw going through it. This will greatly increase your signal. you can use plastic or duct tape to create that shielding.

where can I find the measurements needed for making a 4G gun for Band 40 (2300MHz)? This is what my provider runs off

thank you from venezuela, I will try to make one to see how I achieve it, because here the most common materials are not achieved, and if you get them, they are too expensive, but thanks for the plan and the idea

*I think I should call* *_ELECTROBOOM_* *you know he's finding you for so long to give you a reward!!!!!!!*

Hello! What could be the requirements for making the antenna for 3G 900Mhz and 4G B3 1800Mhz? Nice job! Greetings from Venezuela?

good day thank you for the video I have build this antenna and it works perfect the problem I found is that I get -51dbi with it but our local carrier only supports 900mhz to 1800mhz can you please make a video of 1800 or 2100mhz or give the dimensions or a site where i can get them Regards Johan

Great videos guys keep them coming.

Nice video, btw can you give me a design and dimension for 4G LTE band 3 (1800MHz) of the 4G gun thankyou !

Cant believe Turkcell is called Lifecell in your country lol

Difficult to believe with just an antenna to get very high signal...even with an amplifier booster it would only increase just average...the point with weak signal is even a slight of wind can change the intensity..if you are only using antenna....or with additional of booster it will stabilize the signal consistently

Hello guys, you did a very nice job. I'll do this antenna on my dacha in carpathian mountains in Poland this summer because of weak signal. Can I ask you how tick is this copper plate?

Why are you shorting the primary element to ground? It should be isolated! The reflector and directors should be OK grounded but the primary?

muito boa a sua antena parabens aquii no brasil nao vi um video tao bom

Hi, please make the measurement for 4G LTE Band 40, it is 2300 MHz. My Telkomsel in Indonesia uses this new band for 4G LTE. Thanks for your great ideas

You are wonderful, dear teacher. Please include the method of making the 3600 signal booster antenna.🙏❤️🌹

10/10 Teen Spirit

Awesome channel! I subscribed!

Great video!! Thanx for uploading this. I'm curious about ping times. I don't have signal issues but i have some jitter (8-9ms). I've 90mbps download and 30mbps upload with 4bar signal getting 30ping in local servers thats ok but i wonder this antenna can help to reduce my ping too? 30 to 20ms maybe?

There's the braided wire and the solid wire. You connect braided wire to the biggest disc and the solid to the second one?

you guys really are the best

Your very bright thanks for the details .... you deserve a like

Dear sir, Can we make two units of this gun. One unit for outdoor rooftop as a receiver from network provider & Another unit for indoor as a transmitter to my 4g android smartphone? Will this system work?

nice work, but the first and second disks are connected by the rod, isn't that shorting the connector end points?

This is really helpful. Could you please mention the dimensions for 1800Mhz. Thank you

Which app you used to find the tower location

the distances of the antenna have to be isolated dosots, because if there is not a short in the antenna wires, it works reflecting and does not need to pass electricity !!!

Thanks For Sharing Scientific Idea with Us.

Great video. What is the type of antenna used here?

Can I use this antenna outdoor and indoor with repeater or without repeater in basement for mobile network?

Awesome. There should also be a wire for lightning for stormy weather. Thanks

I’m fascinated by your genius and love to others, thank you very much

hi, thanks for this video. I can't understand one thing: how do you connect sat cable with sma connector? are you using some adapters? if yes how is this adapters? Thank you :)

Will thickness of copper sheet won't matter? Thanks.

Need a network gun for mobile try doing a vedio on that i will be glad to see you in next vedii

Hello , I just want to know if we can use different metal sheets other than copper for this project and if we'l get similar results. Please reply

Very useful and informative ideas Thanks For Sharing Scientific Idea with Us.

nice wow the range is crazy

Could you use a longer cable if you bought some of that expensive type with low impedance for higher frequencies? Because I know standard RG6/59 has pretty high impedance in the gigahertz range.

Wow.it's really work, Here at the Philippines my Speed test is 1mbps only and then I decided to create this one my Speed test now is 364mbps that's how it's works

I live in a location where 4G works on 2300 MHz and the nearest network tower is 32km air distance from my house. Therefore I have no network connectivity. Can you please make a schema for 2300 MHz. It will be very helpful. And can you suggest which device should I use to get a 4G network. I travel 55km on road to use 4G.

Really nice. What’s the name of the two little conectora on the USB modem ? Thanks

Você pode mandar as medidas para 850 MHz?

Megabites are not mbps, from bits to bites you have to divide it by 8. Greets

Can I make using aluminum foil?

Can we use any type of metal stick in place of Thread stud or not?

whats the app you use to find base stations? edit: nvm i found it

The internal supported rod have 1cm gauge..so is there any problems for catching signal??? What should be the gauge of internal rod??

I have a 3G modem which only has one port for antenna. Can I use the same gun? Where should I connect the cables on the gun?

Hi, thanks for sharing, awesome tutorial, is this antenna support for 4G LTE isn't ?

hey how to made your smoke bulb? its fantastic

Hi kreosan, nice video. What is the thickness of those copper plates?

Sir, do the two copper plates touch the bolts? 🤔

did u connected 2 wire in 100 mm size plate with 74 mm size plate?? or 1 wire connet 100 mm with 74 mm plate? plz tell i made this but i confused that matter

Isn't it true you need high power receiver to receive signal from that much big antina ? I have watched so many videos ABT it

hi bro, thx for your video. what bout 4g 2300mhz btw?

I have tried a yagi uda antenna before and i want to try this antenna. I have checked our market for copper foil but i cant find it. Is this gonna work if i will do it with beer can

Can we use it for both transmitting and receiving

Can i use aluminium..? To do this?? Thx

I say thank about your video, its very helpfull. I want ask to you , what if I replace the copper plate with aluminum?

Hi, does it have to be two cables? And the other pole definitely uses us, that is, the sows.

can anyone here tell me the name of the application he uses in his phone