A Noob's 3D Printer Review - Creality CR-10 Mini

Просмотров 66 тыс.

% 1 058

Time to have a look at the CR-10's Little brother.
Disclaimer - This printer was sent to me by gearbest for review. all thoughts in this video are my own based on the experience i had with this unit. no money has exchanged hands for this review.
Creality CR-10 Mini: geni.us/CR10Mini - Use Code: CR10MINI2 - $295.99
For the latest discounts and codes from gearbest, check out my Affiliate page (Constantly Updated): bit.ly/2iD5eRu
CR-10 limited to 200pcs €292 - geni.us/CR103DMN
Tevo Tornado (Direct non-affiliate): bit.ly/2xTovJa
Code: 3DPNT
Models Printed:
Death Trooper: www.myminifactory.com/object/death-trooper-32710
Spool Holder: www.thingiverse.com/thing:32204
Forbidden Watchtower: www.myminifactory.com/object/forbidden-watchtower-46505
Flexible Octopus: www.thingiverse.com/thing:159217
Sponsor - Filamentive Filaments:
EU: bit.ly/2seGi6e - use code 3dmakernoob for 15% discount
US: amzn.to/2rGv89u - use code 3dnoob01 for 15% discount
----------------------------------------
Discount Codes (Non Affiliate):
FormFutura Filaments: bit.ly/2xlBxLo
Use Code: 3DMAKERNOOB-FFT (15% off)
3DPrintz: 3dprintz.co.uk/
Use Code: 3dmakernoob (10% off)
-----------------------------------------
Please consider using the following links to make your online supply purchases for filament or 3d printing accessories, it will not cost you anything extra but will go a long way to help support this channel.
Matterhackers: bit.ly/2mH1jHx
Aprintapro Filaments: bit.ly/2ulNvG2
Amazon US: www.amazon.com/?tag=3dm04-20
Amazon UK: www.amazon.co.uk/?tag=3dmano-21
Aliexpress: s.click.aliexpress.com/e/iYv3ZjM
Gearbest: bit.ly/2m3n0xL
Banggood: bit.ly/2lEVsCO
Should you wish to support me, you can also do so via Patreon: www.patreon.com/3Dmakernoob
Want to send me something? go ahead:
Attn: 3D Maker Noob Joe
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe

Наука

Опубликовано:

25 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@3DMakerNoob 6 лет назад

I did manage to get a discount code from gearbest which lowers the price of the Mini to $339 - check the video description

@MZONE3D 6 лет назад

Hi there... Do you happen to know how this measures up against the Monoprice Select Mini

@maammoos5377 6 лет назад

3D Maker Noob you misspelled unbranded at 3:35

@maammoos5377 6 лет назад

the volume is way bigger for one

@Keldor314 6 лет назад

Regarding the wavy lines in the tower tests, on one of the RU-vid reviews of the CR-10 they were getting noticable wavy shifts when they printing large vases. Turns out that it was the part cooling fan, which was strong enough that the airflow pushed and distorted and wobbled the part slightly during printing. This probably has a lot to do with the shape of the fan shroud/nozzle, which looks like it's the same on the CR-10 and the CR-10 mini. Turning off the cooling fan and doubling the perimeter layers prevented the artifacting.

@maarkaus48 6 лет назад

This is an amazing review. Thank you. I had bought one before seeing this and it confirmed my decision. I had spent months studying the different printers, and finally landed on the cr 10 mini and am pleased to beans with it. Good job on the review.

@rylar4663 5 лет назад

The comparison prints were the most helpful part of the review. Thanks for putting this video together.

@klschofield71 6 лет назад

Hey Joe, Big fan of the channel, you've helped me to understand a lot with just a little. Really like the scientific approach and minimum standards expected from tested machines. Keep up the excellent videos.

@JPWestmas 6 лет назад

you definitely got more specific in your details this time around. Very good review. Thanks

@quadplay2591 5 лет назад

Thank you thank you thank you ! Finally someone who compares the benchy at different speeds... This is the best video I've seen to date. Well done. Most reasonable printers can do a benchy at 30mm/s but the real test is when speed is increased. Looking forward to more of your work .

@stephenberrisford4064 6 лет назад

As others have said the standardised model set helps the review enormously, please keep up the good work👏👏👏

@antonivanov1099 5 лет назад

Very good review. I like the technical approach to benchmarking printers

@MrDalugoga 6 лет назад

You are simply the best 3d printer reviewer on youtube! The new format is awesome, very very informative!

@3DMakerNoob 6 лет назад

+Daniel Garrido thanks Daniel, very kind words :)

@JAYTEEAU 6 лет назад

Thanks Joe. Great format. A consistent set of tests does make sense. Cheers

@3DMakerNoob 6 лет назад

+JAYTEE Tompkins thanks buddy :)

@Magic3DPrinting 6 лет назад

Great review approach!!

@elleryfg7853 6 лет назад

I would like to say the accuracy part of the review was really helpful for me in the way that I know better what to expect if I would like to print precise parts and not just cool things. Thank you. Great job

@glenby2u 6 лет назад

Excellent review. results are what counts and you covered that very well.

@multireel7590 5 лет назад

It's really nice to see someone going in depth with these things and check the print quality from a few different perspectives. I for example do care that print dimensions are as accurate as possible. And since you have used a lot of 3D printers you can actually give some meaning to your findings. I mean, a printer is only as good as it is compared to its alternatives. Audio quality and image quality is excellent and its a well structured vid. Well done,!

@Skullyweb 6 лет назад

I like this style of review. A standard set of settings and models testing various features are a great comparison tool.

@pinkplonker8776 6 лет назад

Great review format, thanks. I’m looking for my first printer and Creality is the leader at the moment.

@gundiochoa 6 лет назад

Great review format!!!

@chrisdub8883 6 лет назад

Liking the standardised tests 👍🏻

@dorkistry 6 лет назад

I had gotten tired of review videos once I had gotten my Prusa, but I really enjoyed this format. Looking forward to more like this.

@3DMakerNoob 6 лет назад

+John thanks buddy. That’s a good thing as I have a few more to do lol

@geekheretic 6 лет назад

I like this style of review, but would it be possible for you to cover how you would dial the calibration in? I have a CR10 and would love to a video on that

@joetke 6 лет назад

I just discover your channel and I'm really pleased. It's instructive and helpful. You're right with the methodology: printing a same and significant set of models makes more sense than dedicating a video for each model which could end up pretty boring. Thank you for your videos. If you happened to print with ABS filament again on this printer, I would appreciate you share your experiment.

@3DPrintingNerd 6 лет назад

Decent look at the machine, and good on you for using a standard set of models!

@3DMakerNoob 6 лет назад

+3D Printing Nerd thanks brother. Hopefully the more reviews become consistent and streamlined, the more it weeds out those quick reviews out there boasting about “the best printer under xxxx” without actually putting hours into it

@GGWAG-45 6 лет назад

3DPN; i also liked the one you did where you compared printers based on size verse price. That helped me out picking my printer. Thank you both for all your hard work an time vested.

@VoidloniXaarii 6 лет назад

yep yep... more comparison between machines... wink wink, nudge nudge, common standards ;) you rock man!

@ldsffddanae9507 6 лет назад

Sir, you can get Creality3D CR - 10mini 3D Desktop DIY Printer Kit for $325.99, www.gearbest.com/3d-printers-3d-printer-kits/pp_778273.html?wid=1433363&lkid=14477197， enjoy!

@bbb90249 6 лет назад

This review was awesome! Definitily you are becoming the best reviewer channel on 3D Printing, always very tecnical and assertive! You could use his method to review the anicubic i3 mega upgraded version!

@acorea44 6 лет назад

Best Review so far! Really enjoy the new format. Offers a much better picture of where the printer sits amongst cost to quality.

@3DMakerNoob 6 лет назад

Thanks buddy :)

@tommyg957 6 лет назад

That Stormtrooper head turned out amazing!

@st3ddyman 6 лет назад

Thanks for the video. Nice review. What turntable do you use to video the models?

@djthunder77 6 лет назад

One more excellent review!!Nice!!And yes is better that kind of tests than the usual ones.Now,what do youn think i should buy?The Anycubic i3 Mega or the Creality CR-10 Mini?

@CapuletPoeChannel 2 года назад

I just now saw this almost 4 years later but THIS IS THE BEST REVIEWING FORMAT I HAVE WATCHED. GREAT JOB! The standard equalizing printings are brilliant. What do you consider to be the best of the CR-10 line and/or which Creality is the best larger volume purchase?

@SolTekReviews 6 лет назад

Really neat! I loved the cr10, but this is pretty cool

@theGermanPrintingNerd 6 лет назад

HI Joe, Well done Man :-)) Love the way you did this Review

@Robothut 6 лет назад

Great review Joe. How was the glass bed on the Mini, flat or did you replace it. Did you use glue stick on the glass ? And I bought and did a short you tube review of the CR-10 S5, the big mother. And the one I bought has a power loss resume feature that sort of works. Have you checked any of your CR-10 S printers to see if they have the power loss resume feature as well.

@richardboyce4921 6 лет назад

Great review and format, keep them coming please. Would be interested to hear the result of your investigation into the section shift.

@LittleTrader968 5 лет назад

Great review, really appreciated your info on speed and print time, this type of info seems to get skipped by other 3d printing channels on YT - I am looking to upgrade from a Prusa i3 clone kit - CR10 / Mini could be a good choice.

@TKs3DPrints 6 лет назад

another great video joe. keep up the great work. and hope the job is treating you well. :)

@3DMakerNoob 6 лет назад

+Turenkarn's 3D Tanks thanks buddy, new job is keeping me very busy hehe

@MrRschutte 6 лет назад

Hi Joe, yes this kind of format is for sure a good way to go. like jou said. this way you can compare the same way. keep up the informative video's regards Ron.

@3DMakerNoob 6 лет назад

+Ron schutte thanks Ron :)

@roysnidow3756 6 лет назад

Great review and review format Joe. May I suggest you also do the same tests on either the Sigma and / or the Prusa MK2S as a base from which to compare. Then we would know how a particular printer does as compared to known good printers.

@TheLotw 4 года назад

I like these type of reviews. Would like to see the Elegoo Neptune in these review styles as that is my secondary choice right now to get.

@Cypher007vUK 6 лет назад

Help got a problem with my Mini. When I level the bed I find I have to wind the bed adjusters so far that I only have a couple of threads left. What’s wrong?

@Remowylliams 6 лет назад

I have a CR-10 and the fan noise was driving me nuts. I googled how to make it quieter and found a tip with 4 fan replacements. WOW what a difference. It's hugely quieter now. the stepper motors are the most notable sound, unless the cooling fan for the supply, which is thermally regulated kicks on, and still it's much quieter than it had been. These same changes would work for the mini.

@SilvioPola 6 лет назад

Hi, thank you for your review, it is very accurate and full of smart tests and suggestions about the product. I think that your approach to the review is the best one I seen. If I can make a suggestion, It would be very interesting a review about printer estruder mod and the capability to print with special filament like Nylon.

@GGWAG-45 6 лет назад

I like this type of review.the fact i can see what the printers can handle with different filaments an see what the tolerants are. But the castle gave me an idea, how about printing a chess set with the pieces the size of the castle? Or to the max the printer can handle. An thank you for all the help an useful info. If like to see where your at with the anet a8 prusa i3. Thanks

@twinturbostang 6 лет назад

Surprised you had issues printing ABS. Do you think adding an enclosure would help?

@Inventorsquare 6 лет назад

This made me think of a way to empirically evaluate Benchies. It requires a perfectly machined Benchy, an excellent 3D scanner, and a program which compares their dimensions categorically.

@ahmadilyas5736 6 лет назад

I like the benchmarking method, just add maker muse lattice cube, twisted lattice, snowflake lattice, newer version of lattice and the tolerance test

@shnek5143 6 лет назад

Can you place the control box on the right hand side of the printer?

@paulobraz6117 6 лет назад

CR10 Mini or Tevo Tornado? What is the best?

@Avboden 6 лет назад

With an enclosure it should be able to print ABS no?

@martinschyns1458 6 лет назад

Great review - I like the base line comparisons - more objective ! You may want to think about coming up with a composite score metric - to account for things like flexibility, upgradability, community support / developments etc. All printers are a compromise; your score elements should help highlight the different trade-offs for the different designs / vendor strategies /model range options. Thanks.

@MFHKIDS 6 лет назад

I just got my cr-10 mini and there is something taped under the heated bed. I'm not sure if I have to take it off or just leave it?

@Cap_Med 6 лет назад

nice review , i dont understand what happen with ABS filament , doesn not supported by this printer or what ? because i already order one a week ago from aliexpress .

@vaughanza 6 лет назад

Great video , thanks appreciate it.

@LourencoVP 6 лет назад

I just bought this for 250€ at gearbest! thank you for the review!

@RKroese 5 лет назад

dont buy at GearBest.

@twisted_seraph 6 лет назад

I like this new format Joe. It really helps. Maybe pasting screenshots of all your simplify and cura settings. There is a lot of them. I know that would help me.

@3DMakerNoob 6 лет назад

+Tc Berry will try to include those. Thanks buddy

@twisted_seraph 6 лет назад

3D Maker Noob I'm having trouble with mine causing little strings above the print when it needs to move. I think I have my retraction at 70mm/sec and .01 mm extrusion before turning moving. Any suggestions?

@tattooednailgirl7553 6 лет назад

I'm looking for a wood quality printer that I can make small items and use them in turn to make silicone molds. I have no clue what to get. This machine was recommended. What do you think? I need something that prints as smooth as possible but can handle fine details.

@clarkstyx 6 лет назад

do this have the resume printing capability? maybe thats the reason its tag price aint that far from the regular CR10..

@PapaP86 5 лет назад

For a first 3D printer is this or the Monoprice Maker Select Plus a better one to go with? Looking to stick with something in the $300 range.

@Joel-zd1of 6 лет назад

great review :)

@ryangarrison7088 6 лет назад

My bed couldn't get past 50 degrees. Took over 20 minutes. You said it gets to 60-70 in 5-6 minutes?

@connoryadon549 5 лет назад

as a machinist, .1mm or ~.004inches, is pretty good tolerances

@memyself3275 4 года назад

Toolmaker checking in......"Squeeze it a little bit more"........ Yeah, thats not how that works. But still, good results.

@UndergrowthProductio 6 лет назад

Does any one have any problems with the menu popping up randomly?

@bigboy6969100 5 лет назад

Is there a cr10 pro mini

@TexRobNC 6 лет назад

I like this style, would love to see more in the same style

@3DMakerNoob 6 лет назад

+TexRobNC notes, more are coming for sure :)

@jasphereRindou 6 лет назад

Dimension error is good metric for the print quality! I had hard time to sand down parts that need to be glued together because the dimension is off. Print quality at the maximum height is also a good test. Usually I don't go for the full height but tend to leave a 10 ~ 20 mm margin for maximum height if I have to print large object. As for the benchy with different print speed, I would love to see the actual printing time comparison. For example, 30mm/s finish printing in 45 minutes, 50mm/s finish printing in 38 minutes, etc. etc. Lastly I would like some metrics on how the support printing is performing. Can the support be peeled off easily. Does the support leave significant marks on the print.

@thehappyextruder7178 6 лет назад

Creality machines are very reliable and easy to Mod into bigger and more interesting things. The Ender 4 has really impress me too, Great video Joe !

@3DMakerNoob 6 лет назад

+The Happy Extruder they truly are. Thanks buddy

@thegentlemanscoundrel4037 6 лет назад

"It's important to print really slow with flexible filaments..." I always print slow, but I like the surface finish I get at 20 to 30 mm/s. :D I think the standardized tests will make it much easier to get an apples to apples comparison. I know some people may get bored of seeing the same models over and over again, but for people who are serious about doing research for purchases, this is good data to have. I agree with you on the strange price point. For the price delta, I'd scrape the 30 bucks from somewhere for the full size CR-10.

@Cypher007vUK 6 лет назад

Just got the mini delivered. Need to wait till Christmas as present for my son. In the mean time wondering what slicing software is best?

@MrBaskins2010 6 лет назад

Joe Blog cura

@Mark_5150 6 лет назад

Great review. Probably the best tested and in depth printer review I've seen. I had a CR-10 S4, and the problem I had with echos I'm sure was due to the weight of the 400x400 print bed. I would imagine that if ine doesn't need to print larger that 220mm in one direction, this version would have a slightly better print quality than a CR-10 or S4.

@3DMakerNoob 6 лет назад

+Mark G infact it does, I noticed that it produces almost no ghosting or resonance at around 50 mm/s while the cr-10s shows them quite a lot

@MakerFarmNL 6 лет назад

I have got the CR-10-S5 (500x500x500 mm) and that version is very obvious proof that the i3 setup (with a moving printbed) is not very well suited for larger print volumes indeed. I had to tune down the MAX Y acceleration (of the bed) to 250 (originally that was at 1500 steps / m2) in the firmware (configuration.h) to get rid of ringing / ghosting. But of course tiny parts now print rather slow compared to the normal CR-10 because it never reaches the end speed with tiny prints. Still it is very nice to have that kind of build volume. Compared to the normal CR-10 (that I also own) the print quality of the S5 is only slightly lower now, but still more than exceptable.

@Mark_5150 6 лет назад

Tinkerman i bought the S4 to do architectural prints, the ghosting was bad with all those 90 degree corners and openings. I had to slow the outter shell to 20mm/s to help, but it was never good for what i wanted it for. Sold it to a guy who uses it for costumes and it works great for that since they are larger prints and usually have post production work done to them.

@johnmodelman1185 6 лет назад

i have the tronxy x3a and it been a good 3d printer

@Inventorsquare 6 лет назад

I really enjoy the more scientific and meaningful approach to the review.

@VoidloniXaarii 6 лет назад

hi. I"m writing not just to thank you for yet another great and professional review, but in particular to congratulate you for your new even more systematic and standardized approach which should hopefully allow more comparison between printers. Especially i'm hoping it will be a solution to the problem i kept seeing: manufacturers keep putting some big numbers on their machines when it comes to printing speeds, some put 80, some 120, some like in this case 200, yet in real life it turns out differently. For example I'm currently printing mostly on a Prima Creator P120, which is i think a here in Germany re-branded (obviously more expensive :P ) Mp select mini, and here too they say something like 55mm/s. After experimenting around i actually print with it only around 35-45mm, and it's cases like this where i hope you'll develop a system to differentiate between the pie-in-the-sky promises of the manufacturers and the max speed at which a user who wants consistent max speed but at quality will do in his actual use. I saw for example you did an introduction for beginners series on another mp select mini type model, i'd be super curious if you were to give that a "realistic max speed" where you'd put that one, just like with the CR 10 and future printers. I hope in the future speeds will keep rising, but especially alongside with print sizes, since, like you mentioned in this review, maybe the wife might not like it if i printed big at the cost of always printing. I have a hope here with the growing trend of printers which save for power-off, which i hope to one day use to pause the printing in the evening and to resume next morning not to disturb the sleep of anybody.

@renatoalvares1772 6 лет назад

The tests at the end are very good, I would like to see how the CR-10s scores. Thanks

@3DMakerNoob 6 лет назад

+Renato Alvares I’ve made the same exact tests on both the cr-10s and the tornado so you’ll get to see them soon :)

@manuelcarvalheiro5420 6 лет назад

Hello, I really liked it and I think you should continue. So we can better understand the real potential of the machines. Thank you

@3DMakerNoob 6 лет назад

+carvalheiro manuel thank you

@The_sound_Of_Thunder 6 лет назад

Good review format, hardly even hear anyone mention the noise levels and most sound like adverts.

@fredrikbarg9805 6 лет назад

Didn't even know that they made a mini version. Seems like another solid printer. I really think that you should keep printing the test prints as that gives a better comparison point between different printers.

@3DMakerNoob 6 лет назад

+Fredrik Bärg thanks buddy, I feel that I can do better comparisons this way

@Chickey 6 лет назад

I thought they were limited in the firmware to a lot lower than 200mms?

@3DMakerNoob 6 лет назад

+Colin Hickey it definitely reached a top speed of 141mm/s but mainly due to the small model as it didn’t have time to accelerate enough.

@WysteriaGuitar 6 лет назад

I need something that can print very small objects at 1:400 scale, like cars, planes, and trucks and buses. These are usually 2-6 cm in length and .5-4 cm in height. Can this printer print things this small?

@antalz 6 лет назад

The boat called "Benchy" which you see in most printer reviews is about 6cm in length and 3cm wide. Your objects can definitely be printed, though fine details like mirrors may look quite ugly. Perhaps an SLA printer like a formlabs form 2 is better suited, but those are quite expensive currently.

@Urk0ZzZ 6 лет назад

Hi, i have an anet 8 and barely fits on my table, im thinking on buying this one, will it fit? its bigger than the anet ¿ thanks

@3DMakerNoob 6 лет назад

+Yoqsetioxd it’s much bigger than the Anet A8

@Semrich11 6 лет назад

what about the tevo tornado?? its pretty similar pretty much a cr10

@3DMakerNoob 6 лет назад

+Semrich11 yep, will have a review of it next week. Pretty solid printer

@blueremusify 6 лет назад

Hi, I'm a teacher and a sponsor can give us a 3D printer and I must choose between this printer and XYZprinting da Vinci Jr. 1.0 Pro. Please tell me what to do. I'm interested about quality, how difficult is software and community support. Thank you.

@MakerFarmNL 6 лет назад

Very good review.. and yes.. standardizing the prints will make reviews a better instrument of comparison... but before you know it, reviews will consume too much of your time and you will in time probably resent doing them... so the it is key to find a balance between do-able / standardized / thorough ... Please try to find a format that wil work for YOU as well. It is nice that you ask your audience what they want, but in the end the audience also would like you to be able to continu to create this kind of content and not get fed up with it.

@lalu2129 6 лет назад

in romania is a diference of 200$ betwen CR10 mini and CR 10

@nicko_3d_art 6 лет назад

what do you mean by macrons? on the layer height

@DroneMesh 5 лет назад

100 == 0.1 mm 200 == 0.2 mm

@cybernetix86 6 лет назад

I don't understand why you don't have more suscribers ...I put you in the same group as Joel, Thomas and Angus. Keep up the good work! Btw I've just googled Malta ...how long does it take you to receive your stuff? I'm pretty sure you don't have a 3D Print Store nearby ;)

@workdreamer1 6 лет назад

Did you already tried Tevo Tornado? I would like to see your review

@3DMakerNoob 6 лет назад

review coming soon

@martijndeman4789 6 лет назад

I can t wait, till you get the Felix 3D Kit :-)

@Nerdite 6 лет назад

I would like to see it calibrated.

@FernandoMassa1976 6 лет назад

I really liked the technical part, I think you should keep doing them. Just so that your videos have a better view and the impatients do not stop looking ahead of time, maybe you should split the video in 2 parts. 1st the cool parts, then the technical part. So you reach 2 audiences. in the cool parts, you should talk more enthusiastically, in the technical part you talk normal. That's my opinion. Hope this helps. Translated from Brazilian Portuguese to English into Google translator

@azreazgaming1947 6 лет назад

At 3:20 did anyone else notice that the filament was freaking the flip out?

@NicozStrat 6 лет назад

can it print nylon filaments?

@3DMakerNoob 6 лет назад

+NicozStrat it can but the nozzle won’t last long as it’s standard brass nozzle. Would need changing after about 50-100 metres of filament

@aaronramly1705 6 лет назад

the $30 diference is because they want the cr10 original to look cheaper. new buyer will find it there is more value in the original cr10 with just only $30 difference. however for those who are aware of the cr10mini launching time will be thinking it is waste of money to buy cr10 mini .the cr10 mini is not their main selling point. it is faster to manufacture big scale focusing on 1 product rather than 4 product at the same time. the other model creality offer is just to fullfill the market needs.so that everybody will remember them as a best brand.from beginner to pro level. off topic : they should add rigidity of the frame to maximise the precision and better design the print plate rail so they dont have play between the frame & print plate

@joetke 6 лет назад

Talking about the relatively small difference in prices between a "big" CR-10 and its smaller bro, it's the same problematic as kids' shoes: it's not because they're tiny, that you manufacture them as easily as adults' shoes ;) I dare suspect that the CR-10 mini design was the matrix of the big ones. CReality states that CR-10 mini's PCB and al are military grade... then support long very long hours of continued operation

@EJayNine 6 лет назад

Hey Joe, Cr10 mini or Anycubic i3 mega?

@3DMakerNoob 6 лет назад

Tough choice, I’d probably lean towards the i3 mega to be honest

@rhov1422 6 лет назад

what are the main reasons to lean toward the i3?

@Cypher007vUK 6 лет назад

Cr10 mini or ender 2? I'm after quality but if they are similar will spend extra for the mini. At mo can get it for £50 more than the ender 2

@3DMakerNoob 6 лет назад

+Joe Blog personally I’d probably go for the mini. The extra build volume, the additional part cooling fan and the community behind it are more than worth the bump in the price. Print quality is pretty much identical between the two

@3DMakerNoob 6 лет назад

+Joe Blog you might also want to consider the i3 mega. Very good machine out of the box

@Cypher007vUK 6 лет назад

3D Maker Noob hmm another £70. I'm gonna be in enough poo with my missus if I spend £233 on the cr10 mini. That's why I was looking at the ender 2 at £175. But then I saw the mini on offer.

@3DMakerNoob 6 лет назад

+Joe Blog you won’t go wrong with any of them, elder might need a bit of additional work eventually due to no part cooling fan, the mini will be good right off the bat

@Cypher007vUK 6 лет назад

im guessing its easier to remove prints off the glass also?

@kryptonicloser 6 лет назад

Hey man I have kinda a random question but until I started watching ur vids I knew absolutely nothing about Malta and I love history and hearing it taught by someone then just reading about it but would it be possible to do a historical tour or even just a tour in general I would love to see what it’s like there n I’ll probably never get the opportunity to see it in person thanks in advance have an awesome day man

@3DMakerNoob 6 лет назад

+KryptonicLoser not a bad idea actually, definitely could do something :)

@kryptonicloser 6 лет назад

3D Maker Noob awesome will be looking forward to it

@gromdronefpv5920 6 лет назад

Great job Joe, no more code for the CR-10 for 319 kept trying no luck .Damn

@3DMakerNoob 6 лет назад

sorry, was just told by gearbest it's no longer active. to be honest, you might want to give the tornado a shot, it's a decent machine. will have the review out next week

@gromdronefpv5920 6 лет назад

3D Maker Noob thanks for your reply , very professional of you. I'm in love with the CR-10 LOL. Looking for CR-10s4 bigger printer size. Any codes for those?

@RC-go2kl 6 лет назад

Octopuses is valid. :)

@ianide2480 6 лет назад

Been printing for a while now and still no benchie... F*%# benchie

@Phil-D83 6 лет назад

Regular cr-10 looks like a better deal. The cr-10s is much more expensive.

@4funrc11 6 лет назад

Too bad all the links are with GearBest coz they just shafted me with an email saying I need to pay more $ for shipping six (6) days after my order (Shipping to US) was accepted, and of course paid. WTH? Disappointing. Them sonsabitches! Saved me money, LOL! PS: You'll not see any (I haven't) links to Banggood. Wonder why? Haha! And GB doesn't have any in stock and the shipping dates keep getting farther out. ':○ Last week the dates where October 25th-ish now November-ish.