In this video I review the most common knobs used by poi spinners.
Click on the times below to skip ahead.
00:59 Play Sphere V1. Silicone
39mm wide x 37mm tall. Knot hole 15mm wide x 18mm deep.
Weight 32 grams. Fits rope up to 1/2”
00:59 Play Sphere v2. Silicone
39mm wide x 38mm tall. Knot hole 13mm wide x 34mm deep.
Weight 32 grams. Fits rope up to 7/16”
00:59 Home of Poi Sphere. Silicone
39mm wide x 37mm tall. Knot hole 15mm wide x 18mm deep.
Weight 32 grams. Fits rope up to 1/2”
03:24 Home of Poi WT4. Silicone
38mm wide x 53mm tall with cap, 47mm without. Cap knot hole 17mm wide x 11mm tall, knot hole without cap 24mm wide x 24mm deep. Weight without cap 21 grams, with cap 32 grams, with cap and swivel 40 grams. Rope size unknown, 1/2”?
04:50 LanternSmith PomGrip V1 Silicone
35mm wide x 25mm tall. Knot hole 19mm wide x 15mm deep.
Weight 16 grams. Fits rope up to 1/2”
04:50 LanternSmith PomGrip V2 Thermoplastic Elastomer?
35mm wide x 25mm tall. Knot hole 19mm wide x 17mm deep.
Weight 12 to 16 grams. Fits rope up to 3/8 but may split with bigger.
07:16 LanternSmith OvoGrip Thermoplastic Elastomer?
37mm wide x 47mm tall. Knot hole 30mm wide and tappers slightly to bottom, 30mm deep.
Weigh 27 grams. Rope hole is very tight, had issues with 3/8” but it can be done
09:03 Mood Hoop Mood Grips. Silicone. 36mm wide x 23mm tall. Knot hole 18mm wide x 15mm deep.
Weight 15 grams, with swivel 23 grams. Fits rope up to 3/8”
10:13 Play PX3 Club Knob. Thermoplastic Rubber.
34mm wide x 23mm tall. Knot hole 19mm wide x 14mm deep.
Weight 10 grams. Rope hole will need to be drilled.
11:08 Henry’s Delphin Club Knob. EVA Rubber Foam.
34mm wide x 24mm tall. Knot hole 15mm wide x 15mm deep.
Weight 5 grams. Rope hole will need to be drilled.
12:25 Mister Babache Flip Club Knob. EVA Plastic. 35mm wide x 25mm tall. Knot hole 18mm wide x 14mm deep.
Weight 10 grams. Rope hole will need to be drilled.
12:59 UltraPoi UltraKnob v1. Silicone
38mm wide x 27mm tall. Knot hole w/chip 20mm wide x 10mm deep.
Weight with chip 27 grams, 18 grams without. Fits rope up to 1/2”
12:59 UltraPoi UltraKnob Pro. Silicone
38mm wide x 30mm tall. Knot hole in case 14mm wide x 8mm deep.
Weight with chip 27 grams, 17 grams without. Fits rope up to 1/2” with modification to chip case.
14:47 UltraKnob Pro Chip and Case In Widmar XL and Stubby. 3D Printed.
40mm wide x 26mm tall. Knot hole in chip case 14mm wide x 8mm deep.
Weight 18 Grams. Fits some 3/8 rope , fits up to 1/2” with modification to chip case, but currently the knob rope hole has a very tight fit on a 3/8” rope.
16:30 Widmar Penguin Standard. 3D Printed.
34mm wide x 23mm tall. Knot hole 22mm wide x 18 mm deep.
Weight 7 grams. Some rope holes vary in size and fit ropes up to 9/16
16:30 Widmar Penguin Stubby. 3D Printed.
40mm wide x 23mm tall. Knot hole 25mm wide x 18mm deep.
Weight 7 grams. Rope hole sizes vary, fits ropes 1/4 up to 9/16
16:30 Widmar Penguin XL. 3D Printed.
40mm wide x 26mm tall. Knot hole 25mm wide x 20mm deep.
Weight 10 grams. Rope hole sizes vary, fits ropes 1/4 up to 9/16
18:13 Flowtoys Capsule Handle. Unknown Pllastic case with knob
25mm wide shell, 37mm wide knob, overall length 115mm.
Weight 54 grams with capsule and knob. Shell and knob weight 22 grams
18:13Flowtoys Capsule Handle. 3D Printed.
25mm wide shell, 35mm wide knob, overall length 100mm.
Weight 54 grams with capsule. Shell Weight 14 grams. Rope size unknown at this point.
18:13 NeoPoi LED Handles. 3D Printed.
42mm wide x 32mm tall. Knot hole is small if running with LED, more info later. Without chip, hole is 28mm wide x 16mm deep. Weight with chip 30 grams, 6 grams without. Rope Size 3/8 so far.
18:13 Flow Forge Creations Magnetech. 3D Printed.
40mm wide x 36mm tall. Magnets 20mm wide.
Weight 50 grams with swivels, 44 without.
10 сен 2024