Need a cool work station like mine? Try FlexiSpot! Use my code “24BDYTB50” for an extra $50 off on the desk E7 Plus! Trust me, it's a rare treat! FlexiSpot E7 Plus standing desk: bit.ly/4egiYwN (USA) | bit.ly/4bZ8TCQ (Canada) ▸ SUBSCRIBE! bit.ly/3msp0Su ▸ Patreon: www.patreon.com/timberbiscuit ▸ FREE Laptop Stand Template - bit.ly/laptoptemplate
Awesome build as always. Great tip for butterfly keys is to bevel the underside edges so that it is easier to both seat initially in the mortise and also easier to drive all the way since it gives the glue a bit of space to squeeze into.
Keys for me as well, which I think is the current trend in woodworking anyway, exposed dovetails, in your face joinery, etc... everywhere you look on IG, YT wherever, people are flaunting their build process in the final product. I bet there will be a swing the other way eventually, and people will start going more shaker and hiding dovetails behind moulding or what have you. anyhow, looks very clean and modern brother. Flexispot really is trying to get in on every YT channel they can these days. I hoope they paid you well though... you deserve it for the consistently quality content you put out. One question: Where do most of your pieces end up? are they commissions? or do you just build for the channel and then find places to put the pieces in your own house/give them to friends and family?
You're not wrong. I think exposed joinery is a lot of fun, too. I just like the hidden aspect on certain occasions. Most of the pieces I build are for myself, family, and friends. There are a few exceptions to that, but with the timelines I have to work with, building commissioned pieces isn't super practical.
Keys. I would like to make them more seen, but I am not a big woodworker yet so when I start to do them they will be bolder. I'll use contrasting woods to make them stand out, they look very pleasing to me and they serve a purpose....... Win-Win
😅 Loved your comment: "Make sure you spend as much time as you can on the internet arguing with strangers" 🤣😂 I'm ambivalent about keys. There are lots of ways to deal with cracks. Whatever floats your boat. Fine with me.
Wow that is super nice Shane! Great job. One question. I do know at least from what I’ve read on the Rubio finishes I have bought it says sand to 120. Is there a reason you go with a higher grit? Obviously it works. Just wondering if I should start going to 180
Thank you man! Yeah so I think the 120 is more for flooring. I have had decent results sanding to 150 too, but I think 180 leaves things the smoothest.
Keys! Free handing bow ties is wild, thats a bit over my abilities. I really like how you broke down each section of your process, you made this feel super approachable. I love how the final desk turned out too, excellent work as usual! You're easily in my top 5 youtube channels.
Keys. Do you feel like the woodpecker autoscale sled is worth the price you paid? Would you buy it again tomorrow if it needed replacement? Thank you for your guidance!
Keys As you'd have to stop a wood defect from getting bigger, why not make it an item? Get creative and make one into a butterfly or a swallow or something like that.
I can understand the 50 grand you've spent on your tools. That's an investment. But where do you get the million dollars to keep making personal furniture out of walnut?
Haha, both numbers are a bit high but walnut isn't priced too bad around me. And I would rather spend a few extra bucks then regret not using a material I like down the road.
@@TimberBiscuitWoodworks I know. I was going to say around 30k. That's about what I've put in over the last decade, and it looks like I have most of the same tools as you, minus a few I see here and there. But walnut in Texas is absurd right now. And since that's what most of my clients want, it turns them off a lot when they hear a material quote
Absolute stunning desk. Just wondering, why you still have monitor stands? We had those in 90's and they made a lot of neck problems. Then we actually started to have screens lower than the desk and that saves your neck.
Thank you! I like having the monitor sit slightly higher than my head so it centers the work at my eye level. I think monitor arms would probably accomplish the same thing, but I also have a set of speakers I want to add on in the future so I opted for the extra space.
Very, very, cool Shane!! I enjoy watching everyone's Flexispot builds. But... you already know your is one of da BESTEST!!! So sorry for my delayed comment. I dropped the ball on this one LOL!! Hoping all is well Bud, Dirty Jersey out!
Very cool build, may I ask did the project go flawlessly? I don't ask that to be a dink I ask because when I have projects if I am not laser focused from start to Finnish I will inevitably make some sort of mistake . I also really enjoy your builds I love the DAD jokes those are fantastic .. Well that's it I hope today finds you well and having a great day ...
Thank you, I’m glad you enjoyed this one. For this project, everything went off without a hitch. That’s not always the case, but most of the time I can resolve shop issues pretty quickly. I think that just comes with experience to be honest. I always try to show or discuss how I overcame those obstacles if they do arise though. I appreciate your support!
No keys...I'm not a fan of the look. Why not just fill the void with black epoxy? Does the bowtie work better than an epoxy fill or is it just another option for the same effect?
Me either, but the butterfly locks the check in place with the cross grain placement and prevents further expansion. Epoxy would only fill the crack, so expansion would still be an issue.
I would not use a key on a flat table edge because that’s a George Nakashima design detail. I do find adding them to bowls with cracks a good challenge.
Keys. But also no keys. I think with your situation, putting the key on the bottom and filling the small check on top makes sense. With something that has more and larger cracks, the keys can add to the aesthetics without being major players. With your desktop, the key would be a distraction.
That's true, really large keys stitching a massive check in a slab can add some visual interest. I agree that on the desktop it would distract from the other elements.
Keys or no keys. I have to say I am the type of person that will use use the keys when needed only. But the one thing I like to do is use contrasting woods to make them
Thank you! Yeah, I love the fit and finish that’s achieved with hand tools. There’s a shot in the finish process but getting up under the desk was a bit challenging so there will be a photo or two over on IG of the butterfly.
Combinations… still rebelling against the engagement gimmick that i hate, but anyway… Nice call on the arm rest. I’ve never seen that on a desk and it’s a great idea. My son is autlst1c and is constantly moving and stands a lot of the time so I got him a similar desk and he loves it, especially pushing the buttons and watching it go up and down, that and watching things spin are really common for kids like him… even though he’s almost 21 now.
Haha, well thanks for still playing along. Yeah the arm rest is really nice, it's something that has always annoyed me with other desks. And that's awesome, I'm glad it works for your son too! I think being able to move around a bit is good for everyone.
@@TimberBiscuitWoodworks Definitely helps him stay skinny, he is rocking nearly 100% of the time regardless of whether he is sitting or standing and at about 5’11” he only weighs about 125 pounds, literally skinny as a rail.
No keys. I think you misspelled the sponsor website URL at 20:56. I'm an amateur/hobbyist who is just getting into woodworking, so it's daunting and equally amazing to see such huge pieces being built while all I've really learned to do is make small boxes. But I hope I can make big pieces like yours with hand tools. I especially love the 45 degree chamfer on the forearm area in this piece. Gives me a few ideas.
Ooof, thats unfortunate but the links are correct in the description. I love mixing hand tools and machines, I feel like I get the best of both worlds.
Keys, but only for the right piece. My current tabletop project has a large crack from drying. But for a live edge table, "leaned" into the crack and adding 6 different sized bowties to stabilise
Keys! I love the video and like your description. I have used both differing woods and the same wood as a key. I think it's a way to really put a little bling into a humble piece.
No keys! I’m late to the show this time but this build was sweet dude! I really like how you did the forearm rest that’s a sweet touch. I’ve always wanted to build a desk too, hopefully when I get around to it, it’ll look half as good as this one. 😂
Keys. I like the focal point of them, and they don't have to be bowtie shaped. You could always make something that is like an inlay but it has the purpose of a bowtie. Love your work.
Both - key/no key - depends, as always, on the application. Love this desk... I want to leave an epic, long comment commensurate with your effort, but as you pointed out, it's 8:30pm here, and more or less bed time... I do appreciate your content. If you happen to do your own closed captioning work, I'd like to commend you on the correctness of your spelling. Question: was thinking of an older video of yours - how is that mailbox holding up?
Thank you so much! Yeah, it’s definitely time to call it a day hahaha. And thanks, I try to do my best with the captions I think they are about 97% correct which is about as good as I can hope for. The mailbox is in great shape overall. The walnut is turning more blonde in the direct sun, but the veneer and miters are still looking tight.