A Tip For Spot Leveling Frets You Probably Didn't Know About 

This is exactly how I spot level check my frets. One thing to add. The last fret can cause a lot of problems because it is used much less than the other frets. I always make sure that fret is just a bit lower than the others. It does not create any buzz being lower, but it sure does being too tall.

This is interesting, but from the title I thought we were going to see a new tip on how to actually level the fret... :(

Great tip Chris. I am a long time subscriber and have learned a lot from your videos. It has been over 2 years since I watched any of your content as my shop is in storage awaiting moving into a nee space. Your current builds a beautiful and I dig the bridge tuners.

Thanks for sharing. It's very helpful !

Very helpful use of fret rocker at first fret! Thank you for the tips!

I was going crazy thinking that I just didn't know how to cut the nut slots on higher strings, but apparently I was not putting enough pressure on the first fret when leveling. It seems so obvious in retrospect, your channel is an invaluable resource. Thank you!

Cool Tip!! Thanks!

I have been following you for years, each time I learn some interesting tips like this one! Greetings from France!

Useful advice. Thank You.

Great stuff!

Such quality work. 👍🏼

First video of yours that I have seen and I am now subscribed. I have never built a guitar that I play guitar and it's very difficult to find somebody who can fix my fretz for me so your tips and tricks are going to come in handy and helping me to fix my own frets

Thank you for the instruction. I learn some from each video.

Thank you! I’ve been searching for an answer to this question.

Exceptional information 😊

You sir have all the tricks! Can learn a hell of a lot watching your vids :) Awesome stuff as ever sir :)

Love your vids. I wondered how to check the 1st & last also, till now. Thanks again.

Great tip! I haven't seen this one before. Thanks.

Thank you for the useful tip!

Great tip regarding the first fret!

Thanks for sharing your knowledge in order to educate the rest of us.

Brilliant. Exactly the problem I was wondering about.. checking the 1st fret. Thank you.

Nice, I didn't realize you can check it this way. Thank you!

Very logical and useful tip. Thank you!

that's a great tip and so obvious once you see it. Thanks!

perfect explanation ! thanks !! 👌

Very cool. i learned something very useful here

Great tip thank you

Thanks for the tip!

Super! Big thanks for idea.

I recently discovered your chnnel and now im a fan.

good stuff as always! 👍🏽

Great! thanks a lot

Thanks. Great tip

Excellent tip at the 5 min mark. Thanks!

Great video.

Great tip! Actually had a high first fret but wasn't sure exactly where. Thanks for helping me out with that. ❤

Brilliant.

I had actually forgotten about sliding the fret rocker to use the tip to find high spots. Thanks! And yeah, this video got a subscription!

so simple, yet so effective

Great tip, thanks! If the last fret is a little too low, it doesn't really matter as there's no more frets to buzz against.

Yep, that's a great tip. Thanks for posting!

U sure have some great videos....wow that sure is a beautiful piece of maple for that neck and fret board. Years ago my friend was a logger here in Wisconsin and he ran into some beautiful birds eye maple....word got out about it and he had a violin maker that was very interested in the wood.The builder ask for a sample of the wood and turned it down.My logger friend said he ran the sample under his microscope and saw it had a mold and some type of fungus that was in the grain and would not use it in his violin builds. Cheers...!

Thanks 4 the video. I'll be using a rubber mallet to pound down the high-E end of the last fret (closest to the pickups). I'll use files to fine tune if necessary.

Thank you for the tip! A good question... and for not-so-expensive DIY necks, I've found that using the soft fret hammer and piece of wood to knock down all of the frets before leveling, will bed in a lot of frets that are too high and in turn will reduce the amount of leveling needed.

well done

Subscription earned!

i'm setting up a new guitar after many years so this is a helpful tip

This is very helpful. I have a guitar where i couldnt get the intonation for second and third frets. Was sharp. So as usual its high nut slot. But then i lowered them and it couldnt get any lower without buzzing open strings and it was still slightly sharp and i thought what is going on here. I suspect its a high first fret and will try this trick. Will see! Thanks!

Nice!!

This Dude is the real deal!!

Purposely leaving the first fret proud and uncrowned was noticeable in the closeup, and made me realize that I could most likely eyeball problem frets by looking, and then paying close attention to string buzz in those areas.

Great video, and lots of new information to consider and focus on. Thank you kindly for sharing the wisdom, and look forward to your future insight & advice. Thanks!

Bravo!

See you. It seems like a long time to me from 1985 to now. I realize that there are many mistakes, especially from myself, in dealing with various electric and acoustic guitar problems. Until now I have not witnessed changes that result in accurate installation. Leveling seems to be the mainstay and the pressradius tool is the main pressure. There are many other factors beyond that that must be considered. Until now I have concluded that many people lack enthusiasm for guitar problems. So I feel this is the best. Even though there is a lot that has been missed. Hopefully this can be my reflection. Have a good fight. My greetings from Indonesia. If you need help, I'm ready to do it as long as it's not part of my confidentiality in handling especially freting.

Very nice indeed. I hope you make a video step by step how to setup the guitar

Very useful info, just in time for me👍. So is it another plus for the zero fret?

That's a sweet looking Guitar!

Doing a proper leveling of the frets should avoid any issues if the ink line does not get removed on the 1st fret it would be a bad move to continue cutting nut slots etc any spot leveling to compensate the 1st fret if it is low is a domino effect right down the frets a lot of work the last fret not many people are going to use that fret so lower is better than higher give it some extra filing but i do get what you are saying the rocker tip is great a mystery buzz on the strings when you have checked all the frets that seem level but buzzes when fretting around the nut end plus it will come in very handy when cutting and slotting a new nut to double check the height of the 1st fret

Before spot leveling, you should always give a fret that seems higher in one area some strikes with a fret hammer. Especially if its only measuring high in one part of the fret like it is on the first fret in this video. This will often fix the issue without further leveling or at the very least, ensure you don't file too low when spot leveling. Nothing more annoying than realizing you have to redo the entire board by having a fret not being hammered down all the way until after the spot leveling.

Good Idea and never gave that a thought but I think I may have a neck to body bulge on the fretboard itself, this guitar is almost 50 years old so I will pull all the frets and level the board first ,in my case its the last 5 frets that are high

I've been spot leveling before I use a file or sanding beam. My last guitar I didn't have to run a sanding beam over it. I did have problems on another guitar....couldn't get rid of the 2,3,4th fret B string ting. I tried everything...sandpaper of individual frets above the tinging fret. Temu has a 3 or 4 inch file on a wood block....tape all but an inch in the middle...use painters tape....it's great for spot leveling high frets. Also the A, and D string usually have some kind of buzz on most guitars I do.....I just can't identify the individual frets that cause the buzz...I'm starting to think it's a high spot above the 3rd or 4th fret....a region of frets. It would be a great video if you addressed how to identify area of high frets from the 7th fret up...even when the frets are not rocking ....they show level with the rocker....this says to me it's a region of high frets. It drives me nuts removing metal from all the frets when it's a group of frets because of something like a high spot on the fingerboard. The pain in the butt of all levels is a capo.....I can always get the frets level but rarely will the guitar capo without a buzz somewhere. You would be a genius to address and solve this problem. The frets rocker fine.....it seems the strings need that small amount of relief to capo properly. Relief in the frets and fingerboard. I like my 1st fret a little high. It protects against the nightmare of a low 1st fret. I cut my nuts very low and rarely have a problem

a HEADLESS version of this would be AWSM bro!

The action looks very high on the first and last fret.

I have a Gibson ES390. My problem is the small E string only on the 13th fret. Its fine until I do a bend on that fret and then it goes dead like its touching something. Its been to 2 different shops 3 times and I'm still having this problem.

I have a bass that only buzzes when I play the F note on the E string. Does anyone in the comments know if it could possibly be the second fret that is too high? Could that be the cause if it?

Do you have a video showing how you achieved those incredibly rounded frets?

This is great information as always! I have an unrelated question: Why are the side dot markers installed with one half in the fretboard and the other half in the neck? Thank you for all of your great videos.

Can freat board cleaners push frets up? I recall leveluing frets dead flat with absollutely no uneven frets. Later, I find a few slightly uneven frets. This is a mystry to me.

Hi Chris, don't you think that the last fret should be lower than the adjacent? It will help eliminate any buzz in the last quarter! thoughts?

Nice neck!

How would I know if I needed to level ALL of the frets versus spot leveling a few problem frets?

What's the problem if the 1st fret is slightly higher (about 0.1-0.2 mm), than the next ones? If so, there will be even less string buzz while fretting the 1st fret. If there's some string buzz on the open strings, the problem is with the nut which is slotted too low, not with the st fret. When the last fret is slightly lower than the previous one, there will be less string buzz at the previous fret as well. So I intend to make the last fret (or even 2 last frets on 24-frets guitars) slightly lower while leveling the frets. And if the 1st fret is slightly higher than the next ones, I keep it untouched while leveling the frets. If the 1st fret is lower than the next ones, it should be replaced with the thicker one, cause sanding all the frets to level them to the 1st one height is wasting of the fretwire , sanding paper and time.

If the highest greet is slightly lower, that shouldn't matter because there's nothing higher for it to hit, correct?

If that last fret is lower than the others, that shouldn't affect anything negatively.

When leveling the fret board, does the Truss Rod need to adjusted so the neck is level and then readjusted for proper bow?

What adhesive did you use for the fingerboard? The join is really noticeable, which is often the case when gluing very light coloured wood.

At the 0:57 mark - Adjusting intonation before crowning seems wrong. Especially for upper frets. Unless you specifically cut the fret slots a bit behind where they normally should be (which seems like a cool idea if you like flat frets). And a question re using the fret rocker - how do you tell the difference between a high fret and a low fret? Both will manifest as "rocking".

I'm just curious, but if the problem fret isn't properly seated, wouldn't it appear high? Wouldn't one want to give it a couple loving taps with a fret hammer first, then recheck?

What if there is a middle fret somewhere that is particularly lower than all the others. It will be sad to level all other fret because of that frets

great. how can we repair a low fret?

But what do you do if fret 1 (closest to the nut) is too low. I've seen this error even on new guitars.

Please teach me something new! 🤙

Hi. Do you still take orders for guitars? Have any for sale now?

You are making a good argument for zero frets, perhaps with out knowing it!

🌟🌟🌟🌟🌟

If you had never worked on a guitar then this would be a revelation....

ok, this is just for new builds or refrets. I thought it might be for 99.99% of the other guitars that had wear.

Go fretless !! ✌😁

Nice tip. Could have been a 2:00 video.

What? No comments on the beard? I guess I'm first. "Proffesorial."

But wait... how can you truly intonate properly if the 12th fret is flat..?

Maybe a lesson on glueing fingerboards cause that’s a ugly Dark glue joint and why are the 24th fret Side dots lost in the joint. People would send that back to me if I did that.

You’re looking more and more like Clapton these days

Zero fret is low,compared to nut.

Thank you!

I certainly did know about it, because it's basic common sense. :)

You look lie the love child of Eric Clapton & Kevin Costner in this video

check your rocker for actually being flat, many aren't.

Yep engage brain before you go down the rabbit hole chasing your tail Cheers I do those myself sort of logical eh