Abandoned 1954 International R120 Farm Truck! Parked for 27 years! Will it Run?!?

Подписаться 183 тыс.

Просмотров 262 тыс.

50% 1

We got this 1954 International R120 pickup from a subscriber who said it "Ran when Parked" 27 years ago. It's got the inline 6 cylinder OHV engine and 4 speed manual transmission. Lets get it cleaned up and see if we can get it back to its former glory! If you're interested in purchasing the pickup I have bad news... It sold less than 12 hours after we posted this video to one of our subscribers! BUT, if you're interested in the 1953 Studebaker pickup, Jimmy would like $500 for it in the shown condition. Email us if you're interested in the Stude! Thanks for watching everyone!
Check out our new and improved Mortske merch site!!
shop.spreadshirt.com/mortske-...
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $33 shipped
SS4 0.625" wide long handle $31 shipped
SS5 0.625" wide short handle $28 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Drop a line: mortskerepair@gmail.com
Ship us things:
PO Box 1
Gwinner, ND 58040
Instagram: / mortske_repair
Tools we use:
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Depstech bore scope: amzn.to/2Txx4Fa
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
External Microphone: amzn.to/3vzdENY
Suction cup mount: amzn.to/3vqC1Nw
Need some Mortske apparel?!? Click the link below!
www.teespring.com/mortske-rep...
Sammich donations gladly accepted on Patreon :
www.patreon.com/user?u=49148891
#internationaltrucks #IH #1954international #MortskeRepair #willitrun #inlinesix #longbed #R120 #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #badgas #nobrakes #6volt #hackmechanic

Авто/Мото

Опубликовано:

4 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@SlyDellian 3 года назад

I’m thinking that MSRP really stands for Mortske’s Starter Repair Palace.

@MortskeRepair 3 года назад

That's awesome! Thanks!

@mjp5318 3 года назад

@Mortske Repair , you know what that is going to do .... at Mortske's starter repair service we will gladly rebuild your starter so we don't lose the shop and so puddin can continue reviving, keeping his vehicles on the road and running for many more years to come.

@robertkeable1627 3 года назад

Lol.

@farmguys1 3 года назад

I owned a Ford truck in the late’ 90 ‘s with a 302 cu in with an inline 302/6 cylinder. Why Ford made it was beyond me.

@MortskeRepair 3 года назад

@@SlyDellian Sorry my first comment was meant for someone else not you! Thanks for watching!

@stomper2582 3 года назад

The reason the old internationals aren’t rusted out is the thickness of the sheet metal on the body. It’s hard to knock a dent in one with a framing hammer. They are like a tank. Brake drums are larger, clutches and flywheels are larger. They were built to last like a tractor. I’ve had 2 of them when I was younger. 71 now. They are good trucks. 👍😀👉🇺🇸

@MortskeRepair 3 года назад

They were built like tanks compared to competitors!

@olgriz485 3 года назад

Yeah they were. In the late 70's early 80's I could go to the IH dealer that sold big rigs and farm equipment. I could find everything I needed there to maintain and repair it.

@MortskeRepair 3 года назад

@@olgriz485 And buy a refrigerator there as well!

@olgriz485 3 года назад

@@MortskeRepair lol. Brother the two of us could talk for hours.

@brown126639 2 года назад

Welding "burn thru on metal this thick ? never a burn thru.....

@Doogie_Causey 3 года назад

Morning Duff! Morning Mortske! So Much For Getting Anything Done The Next Hour

@annalorree 3 года назад

FINALLY a pressure wash video!!! Also, the bed floor is amazing considering the junk in there and being outside for decades. This one is a gem!

@curtkopp19 3 года назад

My dad bought me one of these for my first car in the mid ‘80’s. It ran on two cylinders none of the electrical system worked so I had to only park on a hill to get it started and someone had painted it with a brush. Loved that truck😆

@reecenewton3097 3 года назад

@@pookysdad4884 Au contraire, mon ami: that truck built the boy's character! Father knows best.

@_Dave_S 3 года назад

"The starter. I hate starters. Why did it have to be the starter?" - Mortske Repair.

@bigbodyrydagarage5488 3 года назад

He needs to have a local priest do an exorcism on one of those busted starters n chase that starter evil away 🤣🤣🤣

@seanodonnell9325 3 года назад

ran mine for a year without a starter, it push started so easy and getting a wrench on the starter bolts took 3 long extensions

@stortacus 3 года назад

Restored a 1955 R-112 and I love it. These are an interesting alternative if you aren't into the big 3 for a classic truck. Parts are hard to get though.

@Meriks_Hot_Rods 3 года назад

Been stoked to get a new revival video since last Monday! Nothin like workin on the 66 K20 with a cold snack and some mortske repair

@JorgeDiaz-ly5qp 3 года назад

If ever a truck you worked on deserved to get back on the road... Body-wise, the BEST candidate I've seen you wrench on in a while! Glad she sold!

@charger19691 3 года назад

I like how your dog immediately made himself home in the truck, very content on the seat. When I was a kid, my neighbor was a hunter and had a Brittany Spaniel named Sparky. My God that Dog could run, great hunting dog! I really like this old IH pickup, these trucks were built to work. I live in Pennsylvania, and don’t see many of these anymore.

@timkis64 3 года назад

when i was a kid,my neighbor who was a farmer had one that was basically a twin of this one.it was still going strong when i moved in the late 70's.so they had to be fairly strong to withstand over 20 years of farm truck use.

@smarternu 3 года назад

I appreciate the honesty. Sometimes you win and sometimes you lose, that's real life.

@carlthomas3074 2 года назад

I will keep tuning in though you've got some good stuff and now I really like Duff...

@davida.p.9911 3 года назад

Definitely worth saving. I think it would even make a cool 4WD conversion. Put a Blazer frame under it.....lift kit, some Dana 60s. A GM crate motor. Boom!!

@lottiecooper609 3 года назад

Duff looks ruff!! Must of been out on a hot date last night!! Did you see how he took right to the old international? These international trucks helped build america. I love these trucks!! I don't know why alot of people didn't. Thanks for sharing!!

@stucook8622 3 года назад

Another awesome Mortske Monday! Bummer Duff couldn't come. I bet he wasn't happy about that. Good luck🐾

@shakercrouch 3 года назад

Thanks for having us! Nice truck. I cant wait to come to the States to find a good ol' rig :)

@jontrudell7529 3 года назад

What a Score, Sweet Truck brother!

@DudesWithWrenches 3 года назад

This really looks like the farmers going to church International

@Devilofaguy 3 года назад

I got to where I read the comments before I watch the videos now, so I'm not disappointed when it's a No Bueno. I still watch and enjoy.

@donnie2533 3 года назад

Great truck and video glad you posted keep them coming thanks

@ianallen2 3 года назад

Pity I am in UK. I would love that truck and put another engine in it. Would benefit with another engine. For its age, its in very good condition. It has character.

@BakuretsuTen 3 года назад

God I wish I was closer to you. I’d get this in a heartbeat

@charleykeenan6171 3 года назад

I love these trucks. I would put either a 292 chevy 6 or small block with a TH350 and just leave everything else alone (assuming you can find repair parts) and just cruise it around town (rear is probably 4.56 gears) as is... Thanks for making Monday bearable! Have a great week! 👍

@RoyMarkosGarageRMG 3 года назад

When in doubt it’s always the starter. Or the engine... or the spark plugs. But because it’s Mortske.... it’s another great video. 👍👍👍👍

@rickbaker4571 3 года назад

That thing has Puddin written all over it... a lot of potential there.

@devinhaines4142 3 года назад

Holy crap you cleaned it before working on it! I wish you did this a lot more, not because Puddin makes a clean look good, but that I couldn’t stand having a dirty vehicle before working on it. Should have hit the engine bay though, but we’ll take the clean either way. Keep up the great content!

@redman206 Год назад

I like what your doing keep going thanks

@miltonbayne6649 3 года назад

Duff is by far the best co-worker ever !!!! Never screws anything up !

@scottbrady5127 3 года назад

I think your plan for the truck would be a wonderful series to watch if you don't find a seller before you get started on it. The long bed on this truck looks really good and I was shocked that the bed floor was in such good shape. They must have used galvanized steel or something on the bed floors for it to survive. Thank you both (you and Duff) for providing more wonderful content for us to watch.

@dixonrudman2570 3 года назад

I learnt to drive in one of those back in '68 with my Dad.

@peterkovacs8654 3 года назад

She’s pretty clean, def a nice truck, get er running again

@tonyjohnston19701 3 года назад

Wow! This truck is so cool! Love those rear windows

@robertkeable1627 3 года назад

That's a nice looking thing indeed. Thanks. Be well and stay safe.

@trevorfleming5929 2 года назад

That truck looks to be a perfect candidate for a small block swap!

@dougtaylor8735 2 года назад

I learned to drive in one of these. I think it was 265 ci. It had a main bearing between each cylinder. It was so tough you could pull tree stumps in low gear. Once I bounced over railroad tracks and it started running rough. It would idle but missed when you step on the gas. Turned out the coil wire fell off and was arcing about 4 inches to make contact. Great memories.

@MortskeRepair 2 года назад

Very cool!

@wingdwolf56 3 года назад

Watching you work in that heat this morning was too much! I spent the day at the pool and watched later. And who needs a Puddin pressure wash video when you do it two weeks in a row???

@johnswick4593 3 года назад

Is that Juan Valdez's hat? I used to wear one when standing at a concrete pump in the blistering sun in Californication. I sure miss that hat.

@terryrose6208 3 года назад

This one has potential. Pity the engine had so much damage.

@olgriz485 3 года назад

Yeah it broke my heart. I had a 55 R-110 with the same engine. Got it with 85k on it and it was the 2nd one that had been placed in it. After putting about 75k more on it , I had it rebuilt for $1100. A big price for a Senior in college. I came home for Christmas and due to heavy snow took my 48 Willy's Pickup 4x4 with a snow plow on it and 500lb of rocks in it from College Spring to Abilene, Tx. Boy it was a great choice. Had a rear winch a front winch ( blocked by plow ) and a couple of yellow strobe lights. When came back my dad HIGHLY suggested I let my brother use it. A couple of years later he blew the rear end. BOOOOO 😭😭😭😭😭

@shaylernoah1178 3 года назад

A great video. I very much enjoyed it. The Greta thunburg joke was the best part. I was cracking up.

@chilee6994 3 года назад

What a beauty of a truck.. you scored big time there brother.. I'd be keeping this one

@jockmchaggis6797 3 года назад

+1 on the impact screwdriver comment.. "if you don't know what one is you're working on the right stuff" Come to Western Scotland if ya wanna see some rust 🤣

@Gerk8 3 года назад

Yep, in New England we know what those are too!

@skipstein744 3 года назад

A great find! Worthy of a clean up and bringing her back on the road. Onward!

@aussiebeatle4049 Год назад

Love your dedication to find out what’s going on

@birdfighter0307 3 года назад

My 90 yr old grandpa has my late uncles r120 ihc parked at his place. Wanted him to see it running one more time, but spark plugs 1 and 2 had said hello to the pistons, but I managed to get my uncles 65 d1100 ihc running and driving. Plates registered in 91. He said he never thought he would see that truck moving again. Same master cylinder problem as your yellow ihc revival. Same red ground black positive cables too. Thanks for the videos.

@morganleblanc730 3 года назад

Wow that is a keeper! Super solid for its age. Keep going on that and turn it into a multi part series! Maybe even do an engine swap! On another note; he is the old Bronco?

@MortskeRepair 3 года назад

I still have it.

@tractorjunkco9431 3 года назад

would love to see a crossover with Vice grip garage. Would be hilarious.

@milokerrigan7256 3 года назад

Hell yeah - love your idea, Camaro sub frame etc! That truck is awesome good! Admire your patience! Fricken starter motors!

@Tj1983coggin 3 года назад

Love that truck! I just can’t believe your at 45k subs! I have seen all your videos and always waiting impatiently for new videos.

@dannyo6699 3 года назад

If nothing else, it's a really good start for an engine swap. I'd guess a replacement IH engine will be a bit hard to come by at this point. But even a small block chevy wouldn't be out of the question for this one.

@MaxNafeHorsemanship 3 года назад

No swap needed. IHC used that same engine for many years. Shouldn't be too hard to find one.

@joen3690 2 года назад

You'd be surprised at how easy it is to get a rebuild kit for that truck. I have a 53 and a 55. Both run and drive. And I completely rebuilt the engine in the 55 with parts made for that engine you have right there.

@johnwohlheter601 3 года назад

I really like those old internationals. Parts for them are such a pain. I would swap in a chevy inline 6 and make her my goin to town rig.

@MaxNafeHorsemanship 3 года назад

There isn't a chevy engine that could compare to the original 6. I've had three of them.

@rlinde7837 2 года назад

@@MaxNafeHorsemanship thats why you had three?

@bigalsmallengines 2 года назад

My Grandpa used to have one of these trucks when I was young. I can remember riding around with him in it. I hoped one day to get to drive that rig but by the time I got my license it was not running anymore and he finally sold it. I always thought these trucks looked good and actually rode good. I think you should keep it original and drive it like that. That truck is really in great shape. A good find there Mortske! Cheers to you! 🍻 -Al Cox

@ghostfox3560 3 года назад

First Mortske video and it has to be a truck line my dad used to like, too. Nice.

@ghostfox3560 3 года назад

Gotta say... That grill looks better with it being bent up a little but back on the truck. A new engine does sound like a good treat for that old truck. Hope ya post a video on it, too.

@raymondcoggins297 3 года назад

That would make a great project puddin would love that truck

@Bill-xc8le 3 года назад

puddins videos suck!

@michaelscottscheibner9760 2 года назад

@@Bill-xc8le Puddin's videos may not be for you buddy.

@johnm.5848 3 года назад

In recent months, I started to having a liking for vintage International trucks like yours Mort. If I had it, I'd take your idea of a Camaro subframe and a 350 Chevy small block for the truck to make it safe and road worthy again. Plus Chevy components are affordable and easy to source unlike the 54 International parts which are scarce as you pointed out. I'd keep the body as is.

@TestECull 3 года назад

Why the subframe? Camaro front end aint strong enough for truck duty.

@jeremyhanna3852 3 года назад

Much easier to buy a running driving 2000's chevy trailblazer do a body swapp its almost a perfect fit width wise and wheelbase

@TestECull 3 года назад

@@jeremyhanna3852 So you'd make it about 95 times worse?

@jeremyhanna3852 3 года назад

Hey I got 3 of them trailblazers in my driveway all got over 200k miles ones is stock other one is a 39 chevy body swap coupe other one is 50 chevy truck both run extremely well that 4.2 l6 is a great little motor

@TestECull 3 года назад

@@jeremyhanna3852 They're half as tough as what's underneath that IHC to begin with. Full of 'sealed for life' parts and built to pass a crash test instead of soak up bumps. Also that engine dont hold a candle to the 292 I6 Chevy used to use.

@nancykitzinger3078 3 года назад

That truck is a beauty! Sorry there was so much going against you to get it running. Would like to see it running and driving!

@SST11B 3 года назад

Awesome episode, awesome truck man, thanks!

@stevewhyte8476 3 года назад

First time I ever heard of hitting a deer and breaking 2 valves off .

@MortskeRepair 3 года назад

musta hit it REAL HARD!

@twinkie27271 3 года назад

😂😂😂😂

@mexicanspec 3 года назад

Somebody should invent a trailer where you can put a truck like this, seal it up and pump in WD-40 or another lubricant and let it sit immersed in it for a week. That might help some of these vehicles.

@kharnthebetrayer1575 3 года назад

This could be your $$$$ time.

@mexicanspec 3 года назад

@@kharnthebetrayer1575 I am in the wrong country. The idea is all yours. You might want to get a lubricant sponsor.

@maddoxlogging2303 3 года назад

Awesome truck! That hood design is awesome too. I wish I could find something this cool, abandoned here in Michigan. Usually they’re so rusty it’s almost not worth the hassle. Mr. ‘Spenders has some explaining to do

@davidmerkle9541 Год назад

Hope to see this in another video. Looks real solid!!

@RearEngineShop 3 года назад

Gonna be waiting for puddin to jump out on this one. 😂

@davidcolesr.8628 3 года назад

I Was Thinking The Same Thing

@ryanschuette2308 3 года назад

That's right😅💯

@jeromebreeding3302 3 года назад

That's a good solid International, but that engine fought you all the way, till you cried UNCLE. If it we're me, I'd like for an International 345 V-8, to keep it all in the family. Baring that, a swap of one sort or another. Jimmy suspenders has got some explaining to do, he suckered you !

@Mike-xt2ot 3 года назад

That ole IH is a really nice piece. Alot nicer than my current Goin to town rig.

@CountryBoyGasGarage 3 года назад

🤣

@zacheryjohnson234 3 года назад

'Merica Monday With Mortske!

@MortskeRepair 3 года назад

Murica!!!

@wrenchesinmotion3282 3 года назад

33.20 Duff just chilling in the back. "You got this Dad" He sure loves the corn binder though. Used my Milwaukee impact to take off a crank bolt. Came right off. I love this thing.

@MortskeRepair 3 года назад

Those things are the best!!

@petebovenzi8119 3 года назад

I cant believe how solid the bed floor was after all that. Great find I say . Duffer loves it

@daryldrew8349 3 года назад

Mortske Repair sponsor wish list: Batteries Starters Marvel Mystery Flat head valves Sandmiches Did I miss any

@MortskeRepair 3 года назад

I think that sums it up!

@VintageCars999 3 года назад

Unstuck pistons.

@THRASHMETALFUNRIFFS 3 года назад

Dannggit! That thing is sweet and looked great when wet!

@robertkeable1627 3 года назад

Good stuff. Always watch to the end. Thanks. Be well and stay safe.

@MortskeRepair 3 года назад

Much appreciated!

@theodorezalkind748 3 года назад

Trying to do my trumpet warm ups while watching the video is not working. Laughing way too much to play my long tones!!! Awesome!

@IR-nq4qv 3 года назад

Mortske: "So whattya think Duff...Do you think we should keep this one? Duff(Tail Wagging) : Yup.., I yike it! Mortske: yeah...I gotta say....,"She's got that funky mold patina Duff: " This truck would give Puddin' a Wooden." Now we're talkin'..... Bro, this one is definitely a keeper.. You won't find anything nicer for the year and shape, it's much more than yard art. She's got good bones, nice interior, its all there and its a fine looking truck. If you got the title go for it. LS swap, a game changer for sure. It's even Duff approved, what more do you need? A small investment of time, some used parts, this could be a money maker/ game changer for you down the road.

@farmguys1 3 года назад

If I would have found that I would go with the overhaul or the 302 Ford 6 cylinder . Those engines have 7 main bearings and I don’t think you can break them with an AK 47. Paint the floors and cab corners with Por-15 and drive it.

@IR-nq4qv 3 года назад

@@farmguys1 sorry to correct my friend, there's no such animal as a 302 six cylinder in a Ford, a 302 is a small block V8, the closet to that in a six cylinder is a 300ci it has 7 mains, this is the one you are referring to. The 300 is essentially a truck motor, same size as a 240 ci in a car but with a longer compression stroke. Many of those Ford 300 engines are still being used today in courier vans and yes I agree, they are very stout when it comes to power, torque and taking punishment.

@davidcolesr.8628 3 года назад

I Do Like The Color Of That Unit. Too Damned Bad I’m On the East Coast and Gettin Her to Me Would Cost An Arm & My First Born, I Don’t Want to Loose An Arm !

@billcooke4413 3 года назад

Mr mortske that is a really fair price for this solid truck, wish I could buy it and put a LS in, thanks for being a reasonable person

@MIKEH.777 2 года назад

I love the channel, Puddin said we should come check your channel out and I'm glad I did. I'm a newer subscriber and I enjoy watching you fix these older trucks & cars. Keep up the great work and God Bless you and your family.

@MortskeRepair 2 года назад

Thanks for subbing Mike!

@jftureson 3 года назад

Ran when parked. The dropped valve determined that was a lie. Jimmy spenders you are not the father.

@glennnelson6619 3 года назад

Id put a 300 ford and a 5 speed backed with a single wheel toner rear end and a newer 8 bolt disc break straight axle and that would be my new tow rig

@TestECull 3 года назад

Mmmm. Ford 300. Diesel with spark plugs. Unkillable. Love mine to death

@stoveboltlvr3798 3 года назад

I just posted the same. Can't go wrong with a 300.

@TestECull 3 года назад

@@stoveboltlvr3798 I have a '95 F150 in the sideyard that is an absolute POS. No fuel pressure, vacuum leaks for days, leaks like a sieve, the works. We don't drive it hardly ever, tags expired 3 years ago, hadn't had a battery in it at all in 2021. *But it has a 300 under the hood.* Had to rescue my mom because her 03 explorer no-crank'd on 'er while she was doing the doordash shit so I put a battery in that thing, turned the key, aaannnddd..... **It busted off like it had been running 20 minutes prior.** It runs like utter shit because of all the vacuum leaks and the fuel system being woefully inadequate but god damnit it still busted off without hesitation and it hit on all six the entire time. Indestructible engine. Even when it has no business running at all it still runs *and drives*. Ford really needs to stop dicking around with this ecoboost bullshit and bring the ol' 300 back.

@brentking-gmailking2570 Год назад

Another good one Mortske...Thanks

@MortskeRepair Год назад

Glad you enjoyed it!

@sylvainleseur1072 3 года назад

This truck is great. it deserves to be repaired. Thanks to share.

@MortskeRepair 3 года назад

Glad you enjoyed it Sylvain!

@highpower3006 3 года назад

I'd put a more modern motor in it, something like a Ford 300 I6.

@Gerk8 3 года назад

I second that!

@joeschlotthauer840 3 года назад

Has that been done before, much difficulty, which Trans, AOD....

@highpower3006 3 года назад

@@joeschlotthauer840 I would just put a regular manual granny gear four speed in it or as a last resort a three speed. Lots of them out there. I have done similar swaps in the past and the only real engineering is in making the clutch linkage work. If you know how to weld and have the ability to think on your feet, it's really not all that hard. An auto swap is usually even easier, but not as much fun to drive.

@MaxNafeHorsemanship 3 года назад

I've had three of those engines. They don't come any better.

@joeschlotthauer840 3 года назад

@@highpower3006 Thanks for your polite and informative response

@rickey5353 3 года назад

I can hear Jimmy Suspenders laughing right now.

@MortskeRepair 3 года назад

He got me good!

@nukesploder 3 года назад

Mortske Monday! Mortske Monday!! I love this channel :)

@jeaniepatterson2384 2 года назад

I do t know how I missed this one. I thought it was fun. Great truck!

@WatchWesWork 3 года назад

What a cool truck. Needs a Power Stroke swap.

@MortskeRepair 3 года назад

You got one to donate good sir?!?

@backroadsliving7740 3 года назад

no needs a cummins or a 5.9

@trucks_n_tractors_6335 3 года назад

@@backroadsliving7740 nah needs a IH diesel out of a tractor

@redneckmechanic8094 3 года назад

Needs a c3.6 cat engine

@765outdoors 2 года назад

Lol don’t say stuff like that, good way to start a online battle of what’s better and who’s dumb…. Cummins is overdone like LS and SBC PS swap would be cool. And the other comment with the IH tractor. Or a Ford 300 would be different..ish…

@jimmyers1630 3 года назад

Why not go with a Cummins diesel and a 5 speed!!! Orr you could do a 440 Dodge and Hurst that would WORK!!!

@jeremyhanna3852 3 года назад

Be dam hard to get a big block between those fenders

@kirk467 Год назад

Drop a small block in it and lower it, save the patina and nice wheels too! Nice go to town street rod! 👌🏻🤙🏻🤙🏻 Thanks for sharing Mortske and Duff! Kirk from Louisiana! 🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻🤙🏻🤙🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

@MortskeRepair Год назад

Good idea!!

@dontheplumber9338 3 года назад

Your camaro sub frame idea sounds great to me.It would be cool to see on the road,and it would make Puddin drool for short! Keep the vids comin.Nice work!

@joshabrey6693 3 года назад

Cleanup week find this year was a bunch of chainsaws

@MortskeRepair 3 года назад

Score!!

@MrHowieZ1973 3 года назад

Looks like a good home for a chevy 250 or Ford 300 six

@tonyrose823 3 года назад

Thanks for the good show .

@jpsapartmentcustom9541 3 года назад

Yes I hung around of course brother as always nice find

@darrylvohs5526 3 года назад

What about finding a rusted or rough 7.3 powerstroke? International engine, one ton axles, disc brakes, 2wd or 4wd and body swaping it.

@KiwiStag74 3 года назад

Mortske: "We'll just throw a battery in and see if she rolls over" Starter (who hadn't been listening) : "What? Who's there? What does he wanna do?" Solenoid (who HAD) "I'm gonna give the boy a hint about this engine and see if he will listen" Puddin' : "He should change the name of his channel to Mortske's Starter Repair" Solenoid: "You aint listening. I'm on strike so he don't go wasting his time on this POS" Mortske: "Rocker area looks real good" Solenoid: "You can't tell a book by its cover, boy. You still aint listening" Mortske: "Let's play the game of how many valves are stuck. Stuck, not....." Solenoid: "Hey - you gettin' warmer, son....." Mortske: (moving the head) "Oh...my gosh" Solenoid: "....and BINGO! " Next on Mortske's Repair - How to fit a 350 Chev out of a rotten Camaro into a sweet-bodied Intersmashional truck.

@MortskeRepair 3 года назад

Nailed it!

@SlyDellian 3 года назад

Lance, you have an opera going right there. You need to set it to music!

@KiwiStag74 3 года назад

@@SlyDellian - "The Phantom of the Starter Solenoid" does have a certain ring to it.........but should it be an Opera or a Pantomime, do you think?!

@likilikiki 3 года назад

"We counted em yesterday"😂 That's that quick granma wit.... I love her already.

@AJMRFIXIT 2 года назад

Just Keeps Getten Better Love All the Addons Like the Oil Girl.

@KiwiStag74 3 года назад

Hey - and what's this with buying stuff that already has the valves broke for you? You saving yourself time and just skipping ahead to the inevitable conclusion?

@MortskeRepair 3 года назад

Luck of the draw as they say!