ABANDONED K5 Blazer revival. Drives out of it's grave. Chevrolet Squarebody first start in 15 years 

It would be awesome to see it restored and driving. Two wheel blazers are hard to find anywhere. It’s been great seeing another video. It’s been too long

Factory 2wd blazer. Cool. Pretty rare compared to the 4x4 ones

Oavsett om det endast blir reservdelsbil eller "total"-renovering så kommer det bli jätteintressant att titta på! Jättekul att se en ny video från dig! 🤙👍😀

Looks like all that beauty needs is a passenger door and a good pressure washing!! No way I'd make that a parts truck!!! If it was a 80s one I wouldn't even care I love the roundeye squarebodys!!💗💗

WOW !!! hard to believe, it is a miracle,.....i would have never thought it possible !!! great job !!!

Great job brother. Go for it. She will be beautiful when you get done.

Great work on the Blazer!😁👍⚒️🛠️

Good save ..at least parts are plentiful they make huge huge parts catalogs for square bodies

Just found your channel land it’s very interesting for me. I’ve seen vehicles rusted out and growing moss on them in the lower 48 but never here in southern Montana. It’s so dry here nothing ever really rusts unless the highway department uses salt on our roads, which in this state uses Mag Chloride instead if anything at all. It’s fun seeing you resurrect this ride! I’ve worked on these old vehicles like this on and off my whole life, especially Chevys. When she started backfiring I knew the jig was up. Good on you for doing these videos, truly a privilege for me to see these! Blessings to you from America!

Those second generation K5 Blazers & Jimmys were produced from 1973 through 1991, & same with the seventh generation Suburbans & third generation C/K series pickups except the regular cab pickups "half tons & three quarter tons only" were discontinued in 1987 & the one ton regular cab pickups were discontinued in 1989.

The TSLs look wicked on that 👍

Not bad I like the truck in it's old sitting in it's peace of mind I wouldn't over glamour the truck with painting. Would just sand it a bit and appreciate it's time value. Again thank you for your up loading your video.

Definitely sounds like you have a few dead cylinders. Don't know how common they are where you're at but parts are everywhere here and people ship! Its cool seeing one so far away.

I dont think your a idiot. I have a 1979 K30 4x4 I have owned for 23 years. I just spent the last year and a half going through it.

Wow great work guys getting that outta there. If someone wants to spend the money, effort, time etc to restore it or restomod it they would have themselves a great vehicle.These are very hard to find muchless see one in decent shape rolling down the road.Thats how old I am now, remember when I used to see these and Ford Broncos, Ramchargers on the road and off road quite often.Thanx again

Hey brother, there is a place here in the USA there is a place called Year One and also National Parts Depot that make reproduction parts for the old Chevys.

Merece una restauración sin modificaciones. 🖐

wow vilken otroligt fin historia och vad kul att få se dej sk rädda bilen & att få se dej köra den med :) all lycka till med arbetet på fin-bilen din

That is heart warming.

Pretty nice and clean engine bay!!

Idiot?? No. Passionate?? YES!! She's Rusty But Deserves To Be Back On The Road & Enjoyed!!

Is the frame off restoration done? :P ;)

Awesome! Would love to see its resurrection

Nothing crazy about bring back to life an old square body, especially a blazer

Awsome ❤️

Så häftigt att se! :)

its a chevy from 70s you can't kill them

tjena jävligt bra film fanns de ägare på stället finns de fler bilar som är till salu där?

Hey I was just wondering why the blazer was stopping and starting like that because mine does the same thing

Im sure a modern car wouldnt run like this one after 15 years

Så jäkla ballt !

What what a shame..

What a Beauti...

You're missing at least 2. Cylinders. That's why it's running so rough.

Why would you like the 2wd ones better than 4x4

superlube är bra grejer det 👍

👌👍👍👍👍👍👍👍

Well there goes your starter

5 lug dont mean its a only 2wd you said around 1:06..they made them in 4wd too.

Var det en 240z i bakgrunden?

👍

Put a new motor in it and make a beater man don’t part it out!!

Why not restore it ?!

😊👍🌹

The van buy that

Fix it up

thats no k5

For me you can choose swedish or english.. Speak more english daily than swedish 😂

Is this sweden?

Wow, when I saw the outside I thought the interior would be trash but it was surprisingly good condition as well as the engine bay.

awesome find! i had no idea you could get those trucks in Sweden! how much did that Chevy one ton cost there! we are restoring a 1988 K5 (V5 actually) Blazer. fix it up and keep it original! there are tons of body parts for these trucks! it won't be that bad!

Awesome truck! I think I've seen videos of it from the early days of RU-vid sliding around in the snow.

I'd love to see a restoration series for this truck!

Härlig film👍 Hade varit kul om fler svenskar börjar lägga upp likande filmer. Så kul att se👍 För att svara på frågan i slutet på filmen så hade jag nog försökt hitta en blazer med bättre kaross och bytt karossen för att rädda en 2wd. Jag sålde nyligen en utan motor och låda men med hyffsad kaross och finns säkert fler sådana ståendes i vårt avlånga land 👍

Why would you want a 2wheel drive K5 blazer. I live in Alaska and i just don’t understand why you would buy a truck that’s not a 4X4 if you want 2 wheel drive buy a car lol. My Kia Sarento is 4x4. Its kind of a mandatory thing for me. I dont get stuck in the winter and if i start to slide around with 4x4 and studded tires i know its to slick. I lose track of the numbers of ditch divers i drive buy every winter

Great truck and video, glad is been saved👌🇳🇴😎 Subscribed👏

That's even worse than mine lol, no k5 is a total loss to me! (Mine sat for 25, but not in the woods, the woods seems to reclaim things quicker)

It would get 4wd drivetrain for sure

Wow that's awesome! Love to see these old forgotten trucks be brought back to life. Too bad about the engine though but that can be replaced easy. Is the loud ticking sound from the engine or from a rusted out exhaust?

You need to get closer to the microphone, can barely hear you

Alla bilar är räddningsbara beror bara på hur mycket jobb man vill lägga ner. 😊

Was it difficult to get that HD Chevy in sweden? That part where you came around the corner towing the blazer could have been in the pacific northwest USA. Any idea if these K5s were sold new in Sweden?

I am always curious when these abandoned junk vehicles are sold rather than just given away, i guess they must not really be as junky as I think.

Ive seen better stuff in the junkyard

Is there a reason why you’re happy it’s not 4 wheel drive? or just happy because two wheel drive is more rare?

Its definitely not running on the correct firing order good and I bet the block is fine it probably needs freeze plugs

Is the g20 Van worth anything

Cool räddning! Hoppas du får rädda fler objekt från den gården!

I paid 200 for one

I had a G20 350/700R4 and a G10 6.2 diesel/TH350. I working on a rust that used to be a Blazer now.

Probably you have either some pulled rocker studs, or bent pushrods. It’s not advisable to start an engine that sat for a long time, without removing the rocker covers and gently taping the valves with a rubber hammer to see if they are stuck. Freeing them, and then cranking the engine. And That carb doesn’t sound very healthy either, as you said. Great video, thank you

Where is this ? Not America ?

Barely running is forsure🤣

I'd say timing was still quite a bit off

Good luck 👍

Kul video👍 Den G20in skulle passa hos mig😀

It's a freeze plugs

whats wrong with a 4x4?

I think it has a stuck open inlet valve. That is why it running so bad and blowing back through the carburettor.

it's a freeze plug in the back of the block, but you have to pull the trans to get to them 2 small ones. that would be my guess about the leak

cool

Cool to see it driving again. Gonna need some work but it will be a nice truck when done.

Yo that engine is fucked you cant hear the rod knocking ? Hope you got it for free

How much for you to come and fix my 78 k5 Blazer. It ain’t need to much tbh. Breaks and Headlights thats bout it I think.

Snyggt jobbat! Jag gissar att dina views kommer explodera snart.

Sounds good. Nice to see a 2wd saved.

Restore it. AMD makes square body sheet metal now!

Resto!