Abandoned Project Revived! 1967 Plymouth Barracuda "Ultimate Daily Driver" Gets "Done" And Overheats 

Hey I have one of those! It’s a little different than this one. Love the A Bodies!

Looks like brothers having fun to me. The cool 67 Barrrracuuuuda is just a bonus.

67 Barracuda fastback from Helena, Montana. Glad to see I am not the only one around !

Jamie, it's another confirmation that no matter how hard you thrash a slant six they don't die.

"We learned a really important lesson here, twice"

OMG! I live 3200 miles away from you guys, and after watching this terrifying video, I don't feel safe anymore!!! I knew this was going to happen eventually.

This brings back fond memories of sketchy cars back in the 80s.

Ha! Reminds me of the time I drove my charger home about 120 miles in the rain with no wipers, headlights and maybe 30% brakes...I just tied my boot strings together and attached them to the wiper arms and did the damn thing lol

Haha!- lots like my brother and I just goofing around on our car projects years ago- good times!! And I still drill a 'burp hole' in the thermostats for refills.

Great work. Sounds way better!

Off to another video. I already miss the Barracuda!

I’m sure that slip on drum won’t vibrate your fillings out, also never underestimate dodges ability to make something weird and needlessly difficult 😂😂

Just the state of my cars in the 80s - glad you fixed that idle

Jamie, awesome job of restoring that Cuda.

Thanks Jamie

I have the stud cutler for swedged drums..as well as the Swedger for installing them including the left handed one for old mopars

Looks solid enough to be a decent project.

I’ve got a Holley 1920 on a 65 Belvedere and it works great!

Maniacs of the best kind. Luv the shattering trunk - Mercan survivorism at its finest....

Looking forward to attending the virtual wake tonight for our fallen friend, the expensive wrench. He was always there when you needed him… until he lost his grip.

The Leaning Tower of Power!

Nice was wondering if we'd see the daily driver cuda again soon

I had to mention the 1920, why did I mention the 1920?

AWESOME....you guys are a riot....you shaved....cool.....MOPAR 4 EVER.

A Helena, Montana car. It never saw humidity until you brought it home.

I'm normally a '67-68 fast top Fury guy, but I absolutely love the '67-69 Barracudas with the similar roof. I used to have a '74 Duster that had a 225 slant six with the Holley 1920. By far the worst carburetor I've ever had on any car.

Definitely gonna try out those nicopp brakelines on my truck, gonna get the precut set already flared w/fittings - whole kit is only like $116 at rockauto so I will have the lines on hand when the next one rusts out My chevy drum brakes creak like that all the time, even with the proportioning valve

Awesome, good to see the cuda back again. Just fill the radiator with bars leak,guaranteed to plug everything up.😂

~MERICA ! What an adventure. Hey I love those NiCu brake lines. I have used them for years. You can get a whole kit with fittings online for like 30 bucks. Cut and bend your own. So easy. I am putting them on my 1980 camaro project car right now this weekend too. Yeah I know it's not a mopar but it was cheap and it's pretty. Keep on doing that good stuff Jamie.

Who wants a voice over the voices.? Yes of Jamie’s boss!

For less than a 200 bucks two brothers put a Barracuda from the 60's back on the road and she's a manual . Nice job gentlemen..

Might not be big hp's, but it still runs. With loose plugs. A broken carb. Off timing. No exhaust. Scavenged exhaust. Even the crumbling red wound has a heart that still beats on........... :-)

When an old car pulls it’s not because something is wrong. It’s simply because it’s calibrated for a precise turn

My favorite A body Barracuda

“Outlaws Getting Gas.” I admit part of me wanted to watch the police body cam video of you and The Unibrother on a very different YT channel.

I ran into this problem years ago, they are serviced as a unit. This is due to that the fact that the drum will have run out because when they assembled the hub to the drum and swaying the studs the assembly was machined and true after assembly SWAGING👍🏻

Thanks

LoL- I have vintage '91 tabbed Washington tags on the younger daughter's TC convertible...in NC! Permanent registration & the address is to the place here. Not been stopped yet

Great video! Glad to see the Barracuda is going to be driven! What I cant believe is I've been fooling with Mopars since 1978 and I've never ran across a drum swedged on like that! And I've been through 100's of them including my brother's and friends either I've been lucky enough the ones I've had were already changed or is that possibly a west coast thing or something. First thing I used to do was change out all the left hand thread studs put in right hand ones and put on mag wheels, it was easier than finding LH mag lugnuts. maybe I knocked the studs out and didn't notice the swedge? Cant believe I've never saw that! 👍 oh! I just realized this was the front, thought it was the rear I always just knocked the studs out or removed the wheel bearings on the front, major brainfart for me! Getting old!👍

Thanksgiving driveway must be awesome....

Did you notice that broken brake spring. No worries it'll be fine😅

You two are a menace. 😂

Sweeeet, you guys restored it! Now fix the squeaky clutch linkage…like nails on a chalkboard 😂

I have found that the hood not latching can often be fixed by moving the thing it hooks into up a bit, like a quarter inch.

Those front brakes are groovy lol

You have to clean out the passages behind the metering blocks of those 1920s. That’s how to fix them without a trash can

Im still laughing what a fun video 👍

When I see that four door hard top impala, I always think you and your brother are going to investigate some demons (small d, not Dodges) or vampires.

I have a nice front bumper for that car if you're interested, I can even drop it off at Mainline one of these mornings

Too much fun!

Id be dropping a big block in that valiant

I need that rear trunk trim

Love it

really liked thre video here but really wished we could hear your brother talking most of us couldn't !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! u need to clip a good mic,. to every one in the video so we can all hear em.........

Holy shit, pretty impressed with the improvement after that timing adjustment! What are Colin's plans for it?

I’d drive it!

I love it so much.

Jamie where did you buy that flashlight holder gizmo that was shown clamped to the shock absorber on the cuda? It looks handy

🤣😅"Listen, I paid for every gear; I'm gonna USE every gear..."😂😁

Jamie i say thankyou for you Cool Cannel and all you Videos.. i am since the late 80,s a Big Mopar Fan and have also a Garage in Switzerland,, Car Make Up,, i Love Chrysler Cars and all about it.. so you channel is fantastic and i have so many funn to watch all episode,s, specially about the barracuda with you brother,, so thx for all and keep on going Dodge Brother ;-))... many thx also for you tech Tip,s specially for the restoring ore upgrading A883 Transmission,s.. i like veery mutch... if i have any Questions about E Body,s Challenger cut i contact you for Asking ?? Big Hello from Switzerland Milky and Chees and Chocolat Country,, lol ;-)) sincerely Maik Car Make Up...

Well, you can't say you have crazy hair anymore. Your brother beats you by a long shot. :)

I wonder how it would run with a turbo??? :-) Torque Monster I bet. Regards from Ody Slim..

I have a slat 6 like the barracuda

The clutch spring squeak. Please.

Did you sell the dodge ram club cab w100 blue truck you had jamie sir?! Im asking because you told your brother don't hit Dave's truck?!

What transmission is in that impala, a Eaton fuller 18 speed? Lol

Nooooopo! Turn the wipers off!

Illinois draw back to nickel copper break lines are that they very easily road through if you have them rubbing the fra more or something there's some place that you don't realize

18:57 Well, maybe not.

That thing is going to get 37mpg lol

For a split second, I thought you sold a car to Charlie manson.

Rain X

2:43 cause it's a Chevy 🤣 #MoParOrNoCar

🚬

🙀🤦🏼

Can u say death trap

That car is a danger to both humans and the environment! Sooo ...how much you want for it?

I'm currently restoring a 68 Barracuda Notchback I thought mine was in bad shape but I think you got me beat in this department.