Hello I needed to calculate the temperature rise due to friction for aluminium plate and nylon blocks, can you provide with theoretical methods to calculate that.
Hello sir, this is very useful video. But sir when I am scaling down (i.e. in L-B-H in micrometer) the geometry then it will not show any output so can you pls suggest me what should I do for that.
Thanks very much, Sir. I have a question about the unit in this simulation. If SI (mm) is used in Abaqus, the units for conductivity and specific heat should be (mW/mm/C) and (mJ/Ton/C). So I am wondering why are you using (W/mm/C) and (J/Ton/C) in your video? Would there be any difference if using different units?
Thermal conductivity of aluminium is 210 W/m-K or 1460 BTU-in/hr-ft²-°F so i am not able to understand how to convert it in.... W/mm-c so that it will come 0.15 W/mm-c????? I need the thermal conductivity of H13 tool steel, literature says its 24.3 W/m-K What should i use for the model
Dear sir, how to add translation and rotation velocities in a single step for fsw, also please make a video regarding eulerian properties for metals. Thanks in Advance
Hi Sir, First of all i would like to thank you for this video. i have a question that to move the friction pad along the full length what changes should i make ?
Hello brother can you do a video on Thermal stress analysis of a riveted lap joint by using coupled temperature displacement module. I am currently having contact problems when I try to find the thermal stress due to cooling of rivet by using coupled temperature displacement. In my message file I get these problems 1)THE ESTIMATED CONTACT FORCE ERROR IS OUTSIDE OF CONVERGENCE TOLERANCES. 2) DISP. CORRECTION TOO LARGE COMPARED TO DISP. INCREMENT 3) MAX. PENETRATION ERROR 75.1979E-12 AT NODE LEFT STRIP-1.838 OF CONTACT PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE SURFACE) MAX. CONTACT FORCE ERROR 1.44901E-03 AT NODE LEFT STRIP-1.21281 OF CONTACT PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE SURFACE) Please make a tutorial on this brother, I will be grateful to you.
sir i am working on piezo sensor on a aluminium plate where exicitation is given by varying thermal load but i am not getting the correct procedure to do can you hep me in that please give you email id or any contact details where i can connect with you