Тёмный

Academy A-10 1/48 FULL BUILD & REVIEW! 

The Modeler Chronicles
Подписаться 3 тыс.
Просмотров 55 тыс.
50% 1

In this video we take a look at the new 2023 tooling of the Academy 1/48 A-10 scale model kit! I'll show you what I learned from building it!
Model Kit
amzn.to/3JUwhV9
Supplies
Vallejo Plastic Putty amzn.to/40yjiAe
Mr. Finishing Surfacer 1500 amzn.to/3RwIAKC
UV Resin - amzn.to/3X5k7ha
SMDs - amzn.to/3GJETO2
Paint
Primer: Mr Surfacer 1500 Black amzn.to/3MicYYL
White marbling coat and gear bays: Tamiya XF-2 White amzn.to/3nPowss
Main colors: Mr Color 306 Gray amzn.to/3KvHiOk and Mr Color 308 Gray amzn.to/3ZJUVhb
Clear Coat: amzn.to/3GlM0vt
Tools
Sprue cutter - amzn.to/3QjAbK7
Iwata Eclipse - amzn.to/3GIyzGI
Cheap Alternative - amzn.to/3GkUsu1
Sanding sponges - amzn.to/3ZddeME
small hand piece - amzn.to/3Qlm33a
Large hand piece - amzn.to/3X5TrNl
My Video Gear:
Camera: Blackmagic Pocket 6k camera amzn.to/3GijvPv
Lens: Sigma 18-35 F1.8 amzn.to/3UdkBBQ and Rokinon 50mm T1.5 amzn.to/3UdlMkK
Camera Slider: Syrp Genie One amzn.to/3U72pK3 + Magic Carpet amzn.to/3zzqvn2
---------------------------------------------------------------------------------------------
Music from Epidemicsound.com
Imaginary Being - Gavin Luke
Let Us Drive - Elijah N
Give It Up - Ramin
We Were Always - Duplex Heart
Perfect In Every Way - Airae
Younger Than Yesterday - Violet Barber
How Many Times - Fox Drop

Хобби

Опубликовано:

 

28 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 127   
@craigholman9804
@craigholman9804 11 дней назад
I'm sold on the spectacular descriptions alone from 1:35 😅
@danwilliams1686
@danwilliams1686 Год назад
I think your model looks fantastic. Just a note from an old modeler who has been building for over 50 years, each kit is a learning experience. Keep it up. As far as the paint in the corners being gritty, add some reducer to your airbrush that will help. The thing on the side of the fwd fuselage is a pave penny designator . They don't carry them anymore , hence the four bumps resembling the left over bolts. Which is a nice detail actually. Great job.
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks for the tip! I'll give it a try next time. It's great to hear from other modelers and learn from their wisdom and experience. Thanks for watching!
@simonmowatt
@simonmowatt 2 месяца назад
That nose pylon attaches to the fuselage via two holes drilled out in the early steps of the instructions. With the pilot, I had to file down the instrument panel to fit him in. I'm busy painting my A-10 now and have left off basically all the pylons, tail and engines to paint separately - with so many nooks and crannies in this aircraft, it's easy to get paint pooling.
@hippy2.00
@hippy2.00 3 месяца назад
Just bought mine yesterday same Academy brand as well so it's nice to see how well you did yours and the tips are much appreciated. This should break up some boredom and I get to hang it next to my P-51 in the garage i built about 15 yrs ago.
@grzegorz2688
@grzegorz2688 5 месяцев назад
I was just about to buy the kit. After watching your movie I changed my mind. With so many issues I will wait for a different brand kit. Sooner or later there will be a good one. I have heared something about a new hobby boss release. Nice build. Cheers
@sgtango4310
@sgtango4310 3 месяца назад
I've built this kit. It really isn't that bad. Most of the problems he mentioned weren't there for me. The only real problem I had was a gap where the fornt part of the fuselage meets with the back part. It was very easy to clean up with some masking tape to ensure I didn't mess up the rivets
@colinpragg2686
@colinpragg2686 Год назад
Thank you for this video. It's refreshing to have such a personal and honest commentary on the build. Please keep it up.
@TheModelerChronicles
@TheModelerChronicles Год назад
Will do! Thanks for watching!
@cosmarendy8417
@cosmarendy8417 Год назад
Thanks for sharing. I find your explanation of process great. Often RU-vid modellers don’t explain or show the issues of a kit. Appreciate your honest build.
@jcwoodman5285
@jcwoodman5285 Год назад
Sweet!🤗 I still have the Tamiya A10 I built in 1979😅... I've been thinking of buying one of the newer kits, such a cool Aircraft!
@TheModelerChronicles
@TheModelerChronicles Год назад
Yes it is! This kit isn't too bad if you have some patience and you are willing to deal with some fitting problems 😉
@mode1charlie170
@mode1charlie170 Год назад
Dust in your clear coat!……welcome to the club. Great final result!
@TheModelerChronicles
@TheModelerChronicles Год назад
lol thanks!
@oldman9110
@oldman9110 10 месяцев назад
I’m building this with my son tomorrow. This video will be a big help. Thanks.
@paulflores7021
@paulflores7021 6 месяцев назад
Looks great. Thanks for the tips as I plan on building the Academy version.
@skysailing4355
@skysailing4355 Год назад
Probably best review on model kits. I have the kit, now i know where the problems areas are. Thank you.
@TheModelerChronicles
@TheModelerChronicles Год назад
Glad to help!
@bluered753
@bluered753 Год назад
They keep getting better and better! Very nice job
@gonzalomendoza3152
@gonzalomendoza3152 9 месяцев назад
Your build is really nice! The paint looks fantastic!
@jameslarosa2396
@jameslarosa2396 Год назад
Thanks. I needed this. I'll be coming back to it periodically as I build the kit.
@TheModelerChronicles
@TheModelerChronicles Год назад
Glad to help!!!
@rodwarren2508
@rodwarren2508 Год назад
What an honest review and a great build. I have just got back into aircraft builds and your video sure has helped as i have just purchased this kit. Rod Down-under.
@timothylancaster2787
@timothylancaster2787 10 месяцев назад
It looks amazing to me!! (though I haven't been modeling very long) Looking forward to more videos!!
@tladrt48
@tladrt48 2 месяца назад
Great video ! I have never had a pilot fit the cockpit. Always had to amputate legs. Great results with your build and finish !!
@peteradshead6566
@peteradshead6566 Год назад
Thanks for your video, your model looks fine and you’ve provided some useful advice for when/if I get around to building my Academy A-10C. Like you I was excited after seeing the early unboxing videos and straight away placed an order for this kit, it’s good to see how well it actually goes together. Despite the issues you’ve shown us it’s clearly possible to turn out a good looking model.
@TheModelerChronicles
@TheModelerChronicles Год назад
Glad my video helped! I think I might do another one in the future now that I know what to expect. Good luck with yours!
@justinwallick2181
@justinwallick2181 4 месяца назад
Looks great! That's better then what a lot of people could do!
@echohunter4199
@echohunter4199 Год назад
I applaud your ability to be painfully honest when mistakes happen, we ALL make mistakes as we develop our skills, this says a lot about what kind of many you are and will be. If you’ll accept my advise, I just want to say that never let a person get to you when they say aggressive things, they’ll be dealing with things a lot worse than what you could do to them. Always hang around people that aren’t whiners or confused about their sexuality, AKA; brainwashed. If you think your family members don’t care about you, it’s not that simple, they think of you daily and hope you’re happy and have hope for your future. You’re a lot more intelligent than the average person so avoid idiots and find friends that start conversations with words like; “I have an idea”, this will build your self confidence is doing a project you love. Keep doing great things!
@TheModelerChronicles
@TheModelerChronicles Год назад
Good advice!! Thanks for the comment and compliments!
@Poopster4U
@Poopster4U Год назад
@ 22:01 I am new to air brushing and I learned this too, I call it turbulence. I think a good mitigation is lowering the PSI super low and sanding if it builds up.
@frankiehobby
@frankiehobby 8 месяцев назад
Nice A-10! It’s look very sharp 🎉
@AnthraX304
@AnthraX304 Год назад
Nice Warthog! I have the Hobby Boss kit, it's not new, but in my opinion still very good 😀
@user-oe1fl4hp9m
@user-oe1fl4hp9m Год назад
Good work!
@good2us1
@good2us1 Год назад
WOW! Great job on the build, looks really good!!! Keep up the videos.
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks!! I have several more coming soon!
@allandaniell1439
@allandaniell1439 Год назад
Dude I just found your stuff. Great work and I like your approach to the hobby. As I am finding since starting 5 years ago. There is always the next model to make it better 👍
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks for watching!! Glad you liked it!!!
@juanjosegarcialaurel8711
@juanjosegarcialaurel8711 Год назад
Quedó espectacular!! Estoy aprendiendo de uno de los mejores!! Felicitaciones!!😊
@TheModelerChronicles
@TheModelerChronicles Год назад
Gracias amigo!
@peterlundgren8368
@peterlundgren8368 Год назад
The coolest plane there is. Great content! Keep it up!
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks! It is a pretty cool plane isn't it 😀
@kenshin73himura70
@kenshin73himura70 8 месяцев назад
Been thinking about picking this up. Despite the minor issues on both sides, your built came out fantastic!. Hey, broham. Its our hobby. Once its on display, all those imperfections only we know about dissapear. Every model, its a lesson learned (you said it yourself👍) Only tip i could add to the mix. Try some locktite fun-tak putty to hold pieces in place while dry fitting sections (and a large tupperware to store work between sessions). Overall, great job my man! Keep the hobby going strong!👍🤘
@tladrt48
@tladrt48 3 месяца назад
EXCELLENT !!!
@thanassisveggos627
@thanassisveggos627 Год назад
Beautiful job! Mistakes happen but knowing how to fix them like you did is paramount! Btw I didn't see any dust at all. Maybe because I'm an old modeler with bad eyesight?😂
@paulotavares2905
@paulotavares2905 Год назад
Perfect 👏👏👏
@bobbygee2528
@bobbygee2528 Год назад
Started mine today! thanks for the build tips.
@TheModelerChronicles
@TheModelerChronicles Год назад
Good luck! Post it on your channel, I just subscribed!
@bobbygee2528
@bobbygee2528 Год назад
@@TheModelerChronicles Many thanks! I am lazy with taking picture. but soon i will have many projects to show i will kick myself in the b.. cheers!
@darthhokum
@darthhokum 11 месяцев назад
Perfect 👍
@pawpawstew
@pawpawstew Год назад
Thanks for taking the time to do this video. May I suggest something for your next video. Build on a lighter colored surface. It would come across better on video.
@Murphy007
@Murphy007 Год назад
I think it looks great.👍🏻
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks!
@philocn
@philocn 4 месяца назад
that is amazing
@kevinlong8076
@kevinlong8076 Год назад
Looks amazing
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks!
@goforitpainting
@goforitpainting Год назад
Looks cool. I'm the 955th on you channel. 👍
@bmxmarco
@bmxmarco 5 месяцев назад
Just got this kit - one note for the pave penny pod. They call it out as ver 1 in the instructions as an option. There’s two holes to drill that the bumps on the back of the pod line up with.
@ramonlomeli3306
@ramonlomeli3306 Год назад
Nice job dude, it came out pretty cool! Just as a bit of A-10 trivia: that pylon and sensor on the nose is the Pave Penny target spotter thingy. the four bumps on the fuselage that dont reach the holes in the pylon are what it looks like now that the Pave Penny is no longer in use. It has been replaced by the Sniper targeting pod under the wing. those bumps are the covers to the mounting holes that secured the pylon to the fuselage. the holes in the pylon as you have them now would be bolt heads in real life. Anyways it still looks awesome, i look forward to seeing more of your videos!
@TheModelerChronicles
@TheModelerChronicles Год назад
Good to know! Thanks for the info and for the compliment! See you in the next one!
@devonthomson7069
@devonthomson7069 Год назад
Thank you for the honest review. I have been eyeing this kit for awhile now and all of the reviews that I watched before yours did not really give me a good/bad review of the kit like you have done. By the way, great job.
@TheModelerChronicles
@TheModelerChronicles Год назад
Glad I could help! Thanks for watching!!
@apathtrampledbydeer8446
@apathtrampledbydeer8446 Год назад
Looking good, and that's not dust it's weathering, the old Hog has been sitting in the sun cooking.
@TheModelerChronicles
@TheModelerChronicles Год назад
lol I like that explanation. Lets go with that! Thanks for watching!!!
@modelfun
@modelfun 6 месяцев назад
Thanks bro. Good video. I'm going to build this aircraft soon, and been wondering if it is worth to add a resin seat. Your video convinced me to do so. Cheers, and happy modeling!
@kamui004
@kamui004 Год назад
1:05 on certain parts you decided to go out of sequence from the instructions, but for A31 and A32 you decied to follow the instructions, if you've gone out sequence you'd seen the slots for them staring at you on the back of cockpit tub @1:30. You'd have assembled the whole seat without those pieces, put it in the tub so you could align A31 and A32. 17:15 A-10C stopped using the pave penny targeting pods, but some still had them attached depending on timeframe. The four bolts on the side of the fuselage are not locating pins, they're supposed to be there when the pod isn't attached. Same for the four bolt holes on the side of the pods plate are not locating pin holes either. The inside of part A1 had two flashed holes that you drill out and line up with the two true locating pins in the pod that you sanded down @17:35
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks for the feedback! This is why I love sharing my builds on RU-vid! Its the best way to share knowledge and experience. I definitely want to build another one in the future and I'll keep this in mind. Thanks again!
@edutaimentcartoys
@edutaimentcartoys 3 месяца назад
full build and very detailed part by part
@johnalecsscalemodeling
@johnalecsscalemodeling Год назад
I really enjoyed this (and subbed!) buddy. I think it turned out great, I'd be thrilled if mine turns out looking that good. You're the only one who will see a lot or most of the little imperfections. Keep it up! I'll get to mine at some point and this was a nice tutorial. Cheers
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks for subscribing! So glad you liked it!
@skyvintage
@skyvintage 8 месяцев назад
Marvelous paint and build, just kind of clean for me but is fine
@richardjordan5036
@richardjordan5036 Год назад
Nice job on that kit.I was listening to what you had to say on some of the fit issues and those are some easy fixes.Just by sanding the edges on most of the parts you can and will find out that you will end up having to use less putty.Also you will not have to sand as much.If you have a magnifier and look at most of the join areas before gluing,you will see a light beveling of the edges.It is not much but light and I mean very light sanding helps a whole lot to the point in that you will have less seems to fill or sand.
@TheModelerChronicles
@TheModelerChronicles Год назад
I'll keep that in mind, thanks!!
@davidjohnson6965
@davidjohnson6965 Год назад
Looks like you had the same fit issues that I’m currently dealing with! Great video, subbed.
@TheModelerChronicles
@TheModelerChronicles Год назад
Yep it's definitely a struggle lol. Good luck with your build!
@the-primered-thumb
@the-primered-thumb Год назад
Really nice model mate 😉👌
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks!
@buckmerdoc8860
@buckmerdoc8860 Год назад
Bravo!
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks!!!
@rOEN911
@rOEN911 Год назад
thats nice ,advice about the paint when it get textured and generally to give a nice surface finish to your models ,find some fine metal wool 0000 ,i personally doing the complete model with that and makes super fine surface plus models looks more real because it makes the matt finish a bit shiny just enough like the real !
@TheModelerChronicles
@TheModelerChronicles Год назад
I never thought of that. Great advice! Thanks for the tip!!!
@erasmoconcepcion999
@erasmoconcepcion999 Год назад
Very nice.
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks!
@justinwallick2181
@justinwallick2181 4 месяца назад
You shouldn't talk negative about what you are doing. No one would be able to tell. You paint work was good. It's better then what a lot of people could do.
@devinminar3089
@devinminar3089 11 месяцев назад
So the four bumps that were located marks for the antenna. By the way that's not an antenna. Those four bumps are just pretty much rivets that were put there after they removed that mechanism for the c model.
@Francois997.2
@Francois997.2 Год назад
Here at Nellis AFB they all covered in dust as well, if that does make you feel a bit better 😅
@TheModelerChronicles
@TheModelerChronicles Год назад
lol good to know! Thanks for watching!
@voodoonights1671
@voodoonights1671 Год назад
This is cool to know as I have a shelf full of planes that are now more realistic than ever lol 😅
@kahumike
@kahumike 8 месяцев назад
The "stupid antenna thingy" is the Pave Penny laser targeting thingy for later guided munitions. And yes, it does seem remiss of Academy to foul up such a simple attachment. The slide moulding for the rear fuselage is a pretty nifty piece of tooling, so you think it simplified the overall build?
@butchsbasementbuilds6828
@butchsbasementbuilds6828 Год назад
Awesome video. My daughter picked me up a couple of Academy kits for Christmas. Hope they are good....lol Just subbed you.
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks for the sub! Good luck with your builds!!
@HyperGalaxyEntertainment
@HyperGalaxyEntertainment Год назад
nice work is this kit better than Tamiya A-10 61028 ?
@RedTail1-1
@RedTail1-1 5 месяцев назад
That "antenna piece" is the Pave Penny Pod....
@joerhodes213
@joerhodes213 Год назад
Great job! Don't worry about the paint. Take it from an A-10 guy...there is plenty of dust, dirt, hyd fluid, oil, and junk all over the plane. Again, nice work!👍👍
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks so much!
@TechMilitary901
@TechMilitary901 6 месяцев назад
❤❤❤
@BadEnergyJohn
@BadEnergyJohn 11 месяцев назад
I did the Tamiya kit, not knowing it sucked.
@timandersen8916
@timandersen8916 5 месяцев назад
Thanx alot for making the video 🙂 what drill machine do you use it looks real nice ? greetings from Denmark
@raymadani270
@raymadani270 Год назад
I never trust Academy and hobby boss. They seem so nice at first but issues start to show up during the build. Thank you for the honest video
@TheModelerChronicles
@TheModelerChronicles Год назад
Thanks for watching!
@jaykuptake
@jaykuptake 11 месяцев назад
I just wish we could get an updated one that doesn't have the Pope AFB face paintings. I was an A-10 crew chief and it's been difficult to find one that matches the majority of the fleet.
@mihalislymperakis2422
@mihalislymperakis2422 Год назад
Awesome built and presentation! Definitely subscribed 😊. A small question if you may, how do you call the small drill that you use? I have been looking for something like this as the dremel is not for such gentle work..
@TheModelerChronicles
@TheModelerChronicles Год назад
Great question! I use pcb bits for that. They can work by hand or you can add them to a rotary tool. amzn.to/3MkWRtt
@mihalislymperakis2422
@mihalislymperakis2422 Год назад
@@TheModelerChronicles thank you very much. Keep modelling 😜😜
@PiperStart
@PiperStart Год назад
Great build and great video, a pity about the amputation at the end. The chunkiness of the plastic is difficult to avoid at this scale. 1/32 is much better for accommodating figures.
@TheModelerChronicles
@TheModelerChronicles Год назад
Yep I think you are right about that!
@behrens97
@behrens97 Год назад
I was surprised to see those connector pins for nose weights. Are you an avionics tech? Nice job my man
@TheModelerChronicles
@TheModelerChronicles Год назад
Nope but I used to work around them. I found a bunch of them in the trash one day and thought they could be used for something. And I was right lol
@acompyhd347
@acompyhd347 Год назад
can I get a link to the colors you bought please.
@TheModelerChronicles
@TheModelerChronicles Год назад
Absolutely! Here's what I used: Primer: Mr Surfacer 1500 Black amzn.to/3MicYYL White marbling coat and gear bays: Tamiya XF-2 White amzn.to/3nPowss Main colors: Mr Color 306 Gray amzn.to/3KvHiOk and Mr Color 308 Gray amzn.to/3ZJUVhb Clear Coat: amzn.to/3GlM0vt Hope this helps!
@tanguyh7990
@tanguyh7990 Год назад
At the end of your vidéo, what are you using to take some vidéos?
@TheModelerChronicles
@TheModelerChronicles Год назад
Hi there! Here is the film gear I used for the final results montage: Camera: Blackmagic Pocket 6k camera amzn.to/3GijvPv Lens: Sigma 18-35 F1.8 amzn.to/3UdkBBQ Camera Slider: Syrp Genie One amzn.to/3U72pK3 + Magic Carpet amzn.to/3zzqvn2 Equipment is a bit expensive but I really wanted to invest in it so I can make better videos. Hopefully the quality of my content gets better with this stuff. Thanks for watching!
@tanguyh7990
@tanguyh7990 Год назад
@@TheModelerChronicles and do you use a box? And turntable ?
@TheModelerChronicles
@TheModelerChronicles Год назад
@@tanguyh7990 Actually my background is black posterpaper from the dollar store. I use this turntable to display my model: amzn.to/40YRVyv :)
@marcranger4596
@marcranger4596 Год назад
Might wanna take that fuel tank off again. The early c versions never flew missions with them. It's only recently they have started testing if it's a good idea
@TheModelerChronicles
@TheModelerChronicles Год назад
Good to know!
@sbutcher864
@sbutcher864 Год назад
Great model and detail!! Actually, the fuel tanks aren’t combat rated, in that they aren’t self-sealing and a hit could prove disastrous. They are the same tanks that have been in use since the A-10 was first fielded. The tanks are only used for deployment or ferry flights and would probably never even be flown with live munitions loaded on the jet. I am a former A-10 pilot with over 2500 hours, many while assigned to the same squadron as depicted on the model.
@paulsmodels
@paulsmodels Год назад
I saw the real thing at an airshow, and it was in the same color scheme as your model. The panel lines, and "weathering" did not stand out like it does on your model. Nice build though.
@TheModelerChronicles
@TheModelerChronicles Год назад
thanks!
@yingkunwang9469
@yingkunwang9469 Год назад
I just wonder those rivets were done by you or it was produced by academy?
@TheModelerChronicles
@TheModelerChronicles Год назад
The rivets were molded in. I didn't have to add then. Academy did a pretty good job with those
@raymadani270
@raymadani270 7 месяцев назад
Nice build and don't be hard on yourself. It's an academy kit after all. They have a duty of screwing up here and there.
@deerdear2511
@deerdear2511 Год назад
29:09 Кадры жестокого насилия над пилотом.(( Слабонервным не смотреть.
@TheModelerChronicles
@TheModelerChronicles Год назад
hahaha yep! That pilot will never be the same :)
@deerdear2511
@deerdear2511 Год назад
@@TheModelerChronicles Спасибо за видео, было интересно посмотреть.)))
@RedTail1-1
@RedTail1-1 5 месяцев назад
The 1/72 A-10A kit is a piece of garbage... I'll never order any Academy kit again. Every single piece was misshapen and no two pieces fit together. Gaps everywhere, the cockpit wouldn't even fit in the fuselage, and sssoooooo much sanding. I almost broke it so many times getting pieces to pop together even after sanding a ton off of them. Total waste and a huge disappointment for my first kit. Funny thing is despite all the reviews praising how great it was, one review really stuck out to me. The guy said he had to do a crazy amount of sanding and that there were still gaps everywhere. I kind of brushed it off because almost all the reviews were 5 star positive praise. I should have listened to my gut.
@RedTail1-1
@RedTail1-1 5 месяцев назад
I almost forgot. The instructions do not help at all. Very vague and some pictures even show parts backwards or in different places in different pictures. Academy sucks and has put me off buying anything at all from South Korea. Their company alone has soured me on any product from the entire Country.
Далее
1/48 Hobby Boss B-24J LIBERATOR (CUSTOM BUILD).
24:26
A-10C Thunderbolt II full video build - REVELL
15:20
Просмотров 270 тыс.
НРАВИТСЯ ЭТОТ ФОРМАТ??
00:37
Просмотров 1,1 млн
We will see who will do it better 😂
00:14
Просмотров 3,8 млн
Experience the FIREPOWER of the A-10 Warthog!
15:12
GIANT RC A-10 WARTHOG WITH BRRRRT & FLARE
7:16
Просмотров 12 млн
B-25J Mitchell 1/48 Hong Kong Models
51:37
Просмотров 252 тыс.
Academy CH-53E US Marines 1/48 Scale Full Build
46:47
Просмотров 270 тыс.
Inside the F4U-4 Corsair
20:14
Просмотров 1,3 млн
How "Killer Chick" Got Her Battle-Damaged A-10 Home
48:50
Building A 1/48 Learjet Diorama!
26:49
Просмотров 2,9 тыс.
A-10 Thunderbolt II - 1/48 - Tamiya
9:26
Просмотров 34 тыс.