No video :(

Acerbis X-Factory Handguard Installation Guide for Honda CRF300L & Rally

Подписаться 12 тыс.

Просмотров 12 тыс.

50% 1

Detailed installation guide for Acerbis X-Factory Handguards.
LINKS:
Hacksaw: amzn.to/3QBwoY3
Impact driver: amzn.to/3tC97vN
Hex wrench set: amzn.to/32U647P
Socket wrench set: amzn.to/3EP9kBW
Small flathead screwdriver: amzn.to/3sbUm0L
Razor blade tool: amzn.to/3L9raAo
Zip ties: amzn.to/3rm2hJF
Magnetic bowl: amzn.to/3HsWtnA
Motorcycle stands: amzn.to/3rv1gyA
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: www.subscribestar.com/endless...
Support me on Patreon: / endlessmoneypits
Check out my merch!: endless-money-pits.myspreadsh...
Or make a one-time donation: paypal.me/EndlessMoneyPits?lo...
TOOLS AND SUPPLIES USED:
• 12” Hacksaw
• Impact driver
• 5mm hex
• 6mm hex
• Socket wrench
• 10mm socket
• 8mm socket
• Small flathead screwdriver
• Razor blade
• One zip tie
• Magnetic bowl
Music not provided by RU-vid:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
*Disclaimer*
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Опубликовано:

14 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@danr8203 Год назад

I tried installing Acerbis X-Factor hand guards on my Rally with stock bars today and ran into an issue. The stock brake and clutch levers are too long. Buying the Zeta ones now for better clearance. I saw you swapped them out during this install video, but didn’t mention it was necessary for proper fitment.

@EndlessMoneyPits Год назад

I'm surprised to hear that! I did swap out the levers during this install but I had no idea the factory levers were too long. Didn't try mounting the hand guards until after I installed the Zeta levers. Sorry about that!

@surlyseal Год назад

Super detailed installation video except for one critical bit. Wish I had read this before ordering the handguards! I was scratching my head in the middle of the install wondering why nothing fit. Then I noticed that @ 3:36 the stock levers are magically replaced. Sneaky! Can't afford new levers now so the hand guards are being returned. Vid definitely needs a disclaimer that this is only for bikes with Zeta levers.

@EndlessMoneyPits Год назад

These handguards should work with any aftermarket levers that are shorter than factory, which is basically all of them. You can get a set of levers for $20 or maybe even less. I'll pin this comment so it's easier for people to see.

@CeigeNUT 3 месяца назад

I'm really enjoying the ''How Its Made'' style of your editing. You earned my subscription! Thank you for the much appreciated content.

@EndlessMoneyPits 3 месяца назад

Thanks, I try to make everything as clear as possible. Thanks for watching!

@dkhdkh9606 7 месяцев назад

Installed grip puppies a while ago. Bought the Acerbis guards and started to mount. Big problems. This video only applies if you have removed stock grips and bar ends. It is also super helpful if you have the shorter levers installed already (as noted below). Now I need to cut off and buy new Grip Puppies, grips, and levers. Meanwhile the bike sits with the handlebars a mess. Probably for a few weeks while I wait for an order. All that aside, your vids are all spectacular.

@EndlessMoneyPits 7 месяцев назад

Thank you. Sorry for not being more precise about the fitment requirements. I've only gotten to do a handful of videos with this bike so far.

@detroitpyro2859 Год назад

❤ Thank you my friend that was a great video

@EndlessMoneyPits Год назад

Thanks, glad you found it helpful!

@tletang 3 месяца назад

Which levers did you use?

@EndlessMoneyPits 3 месяца назад

The ones from this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oWqxvvwRURA.html

@bernk 2 месяца назад

Which paddock stand are you using, and do you recommend it?

@EndlessMoneyPits 2 месяца назад

There should be a link for it in the video description. It's kinda cheaply made but gets the job done and is pretty affordable compared to other options. I've had it and the front stand too for about 7 years with no problems, so I would recommend them, but don't expect a high quality product.

@bernk 2 месяца назад

@@EndlessMoneyPits thanks for the reply, but I checked the description and didn't see it mentioned. All good, I'll find one. Thanks for the excellent videos.

@EndlessMoneyPits 2 месяца назад

@@bernk Sorry about that. I've added the link now.

@uncledazz6817 9 месяцев назад

I'm just happy I now know how to pronounce Acerbis

@EndlessMoneyPits 9 месяцев назад

I had to look it up to be sure lol

@uncledazz6817 9 месяцев назад

@@EndlessMoneyPits hahaha 🤣

@steveeichelberger806 5 месяцев назад

Magically the mirrors change, the levers change, the grips change and bar weights disappear.

@EndlessMoneyPits 5 месяцев назад

I wish it were magic.

@steveeichelberger806 5 месяцев назад

@@EndlessMoneyPits all it takes is money. Of course you already know that. 😀

@edukze Год назад

…. Didn’t need to remove the weights on the bar… you took off stability to the bike at high speeds and also gave the bike extra vibrations… poor owner…

@EndlessMoneyPits Год назад

There is no loss of stability or added vibration. The weight of the handguards more than offsets the bar end weights. I would not recommend mounting the handguards to the weights (if that's even possible) because the weights spin freely. Handguards need to be mounted to a stationary object.

@edukze Год назад

@@EndlessMoneyPits I could agree with you about the weight balance because of the handguards however I don’t mean to mount them right on the weights bar, you take out the beauty thing the real weight bar is what it is inside.

@EndlessMoneyPits Год назад

The handguard mounts also put mass inside the bar. There is no difference in ride quality after installing handguards.

@davejoe2592 Год назад

Are those stock bars? My understanding (at least for the non rally version), is that there are weights in the stock bar ends threaded for an M6 bolt that need to be drilled out and tapped to accept it unless you choose to use an M6 instead. I bought the same guards and did a test fit yesterday and also found my clutch lever appears as if it is going to rub on the guard (mind you it was a very crude test fitting as I didn't have time on my side).

@EndlessMoneyPits Год назад

Yes, they are stock bars. I forgot to mention I removed the bar ends in the hand grip replacement video. They don't have to be drilled out. You might be able to adjust the clutch lever inward if it makes contact with the handguard, but it shouldn't. Here you go: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SAaePLL0QNo.html

@davejoe2592 Год назад

@@EndlessMoneyPits Awesome, thanks so much for your help!

@EndlessMoneyPits Год назад

That's what I'm here for! Good luck with the installation.