Achieving Perfect Fitment! Bagged MK4 Jetta VR6 Wagon. 

Instead of cutting the fender liner if you use a heatgun you can maybe reshape it so it fit the tire

one good tip for the fender liners. Heat the crap out of them, air out the car and the tire will strech them perfectly. second. dont forget to hammer down the locking nut for the front strut height adjustment. ther are well known to get loose and snap the air leader hose

she looks good for sure, I would just suggest drop/centering plates for the rear to center it up bit, Mk4's once dropped have a tendency to shift the wheel's forward, Ecs as some that go under the rear beam or fabless manufacturing if they still make there idf clone ones but i get you dont want any more camber which the fabless ones give you about -2ish, i'm sitting at about -8.5 all around on my static mk4 jetta setup at the moment lol

The V2 settings on your Mk4 wagon are spot on 👍🏻 I love the new look of this car at the lowest bag settings. Just the right height between the tires/wheels and the fenders all the way around this car 😎

Now the Water goes to the back off the fender and rust. Good work i love the stance off the wagon

perfect fitment Christian that cupra lip is going touch the floor if you decide too put it on😀✌👍

Crazy how much suspension and wheels can make a difference 🔥🔥

I'd consider getting gen 2 xenons with the built in ballast. Or send your headlights to vx tuning to get them converted. Save the hassle and potential fire risk of that harness having less protection with that pinch weld flattened a bit. Will also give you a bit more room aswell ☺️

It's looking sick like that don't overthink it its amazing ❤

Hi Smith…first of all congratulations for your work and videos…keep doing those works…!!! Tell you that in the Jetta you have the typical problem in the rear axle of the VAG group, the rear axles are all moved to one side a few millimeters... and when you put a tire looking for an adjustment, what happens to you, one wheel is perfect and the other a few millimeters further in or out... you can solve it by visiting an alignment shop to loosen the bridge and patiently take it to the site, or, inserting a spacer/adapter about 3mm wider on one side than the other... in my car for example, I had a 7mm spacer and a 9mm spacer on each side to adjust that difference so that it would stick when going down with the tire... greetings and I hope the experiences of some engine burns will help you 😅😅😅😅 a hug!!!

Damn. Wagon is looking perfect dude. Really love this setup!!👍

Looks sick and the way you did seems so simple. makes me want to do this to my Jetta sedan.

A high flow cat, some cams and done 🫡

Funny, i have a fender roller, but also always grab the rubber mallet or small baseball bat. 😅

Those 20mm rear spacers don't have a center for the wheel to sit on which is a little bit dangerous and it might cause a bit of a vibration in the steering.. Is it possible to get spigot rings to poke from the wheels and fit into those rear spacers?

Bro you're such an inspiration, without a doubt

I'm all for full use of the car, bags WIN!👍🏾🤟🏾

Looks awesome!! Just need some drop plates from Fabless now.

dream setup man... im so jealous

Wagon's looking mint..super clean n sexy... The car has come a long way... Beautiful car brother....

Looks mad bro👌

Damn. This setup looks sooooo awesome👌👌👍👍👍🤩😉✌️

Looking nasty 🔥😎

C-man it looks fire damn damn good 🔥🔥🔥🔥🔥🔥🔥🔥

This aint my type but glad you liking it

Arent your little flaps of cut fender liner gonna drag over your tyres when it simply "clicked" back up?

Stunning🥰🥰🥰

I love you wagon❤❤

Exelente trabajo 👏👏👍🇲🇽

U have to try a set of small wheels and she will lay frame

Love the wagon. What type of adaptors are you running @christiansmith?

Does the car allready have a rear wheel relocate kit? to center the rear wheel in the arch. I've got one that has camber and lowering as well, but you can get them without.

did you already checked your rear axle? i had the problem that my axle already touching the frame of the car, so i cant get any lower :D

non hub-centric 20mm adaptors? Any vibration?

Вечер добрый. А можно по Русски услышать, хотя бы раз? А то смотрю каждый раз и ничего не понимаю. очень интересно , потому что сам занимаюсь немного. У меня сейчас гольф 3.

You need a notch So You can lower in front

Hermoso vw y que buen gusto tienes hermano

Is this a VR6 swap?

First 🥇

That doesn't fit, it rubs. This is a dumb trend like squatted trucks or camber

First

It's looking sick like that don't overthink it its amazing ❤