ACMER P1 10W Laser Engraver , Assembly and Test
ACMER P1 10W Laser Engraver: bit.ly/3KmfMBA
ACMER P2 33WLaser Engraver: bit.ly/43kaIGk
Acmer M2 Laser Rotary Roller: bit.ly/3UisGoN
ACMER Enclosure Box: bit.ly/3nWoDSZ
ACMER C1 Air Assist: bit.ly/3MuxTIa
ACMER Laser Honeycomb: bit.ly/3ZTwwpi
Geekbuying:
ACMER P1 10W Laser Engraver: www.geekbuying...
ACMER P2 33WLaser Engraver: www.geekbuying...
Acmer M2 Laser Rotary Roller: www.geekbuying...
ACMER Enclosure Box: www.geekbuying...
ACMER C1 Air Assist: www.geekbuying...
ACMER Laser Honeycomb: www.geekbuying...
aliexpress:
ACMER P1 10W Laser Engraver: s.click.aliexp...
Acmer M2 Laser Rotary Roller: s.click.aliexp...
ACMER Enclosure Box: s.click.aliexp...
ACMER C1 Air Assist: s.click.aliexp...
ACMER Laser Honeycomb: s.click.aliexp...
The output power of the P1 laser is increased to 10W, but it still achieves the 0.08mm focus of the through laser beam shaping technology, which means the P1 has higher energy density, stronger cutting penetration and engraving capabilities.
The advanced air-assisted and high-power P1 laser can speed up material burning and residue removal, greatly improve cutting performance, and make laser cutting faster and cleaner.
The architecture of the P1 engraver uses the 2040 profile, which is solid and the operation is smooth; Premium track with a powerful motor, smoother when engraving and carving the object. 400 x 410 mm large work surface to meet various engraving needs.
P1 high speed air assist and high energy density lasers increase cut penetration. Available to cut multiple materials and also easier to process high density wood such as MDF, walnut, which are difficult for conventional lasers.
This machine works well with LightBurn and LaserGRBL, supports Windows, MacOS, iOS and Android, the engraving file supports SVG, NC, BMP, JPG, PLT, PNG, etc.
Built-in ESP-32-DOWD-VS chip, LX6 32-bit microprocessor, the machine supports operation via WIFI, TF card and USB connection. Simply connect and control it, no messy cables needed. P1 equipped with emergency stop switch and overturning protection device, which can stop work immediately if any abnormality is detected during carving.
specification:
Model: P1
Dot size: 0.06 x 0.08 mm
Machine size: 613x590x200mm
Machine weight: 5.8 kg
Engraving accuracy: 0.01 mm
Engraving speed: 10000 mm/min
Engraving size: 400 x 410 mm
Engraving method: USB/APP/Online/TF
Laser power: 10000 MW
Laser wavelength: 450+5nm
Supported systems: MAC, Windows, Linux
Machine material: aluminum profile + iron sheet
Electrical requirements: 24V 3A DC
Motherboard: 32 bits
File format: SVG, NC, BMP, JPG, PNG AND GCODE
Engraving Materials: Wood, Plastic, Paper, Leather, Bamboo, Stainless Steel, Steel, Chevron, Acrylic, Glass, etc.
28 сен 2024
