Acura/Honda Tubular Front Strut Replacement - MDX, TLX, Pilot, Accord, Ridgeline, Civic, CRV 

Honda / Acura late model vehicles ( from 14' MDX, 15' TLX, 16' Pilot, 17' Ridgeline, 16' Civic, 17' CRV, 13' Accord) now use tubular front suspension struts. This means the lower rounded portion of the strut is fitted into the steering knuckle. Earlier MacPherson struts were bolted on were much easier to replace. With this new design, the steering knuckle must be detached and removed from the strut, lower control arm and stabilizer bar link along with the brake rotor, caliper and ABS connector; a much more labor intensive task. A pinch bolt holds the strut tube firmly in the steering knuckle. With the pinch bolt removed, there is not enough clearance to pull the strut tube out of the knuckle tube hole opening. The only way to remove the strut away from the knuckle is to remove the knuckle. The replacement struts I purchased are made by a company called FCS. Been using them for years with no problems.
Tools Used:
1/2" Impact Guns, crow bar, high mass hammer, punch, flat and phillips head screw drivers, pliers, 10 ,12, 14, 17, 19, 36mm sockets (or channel pliers/large adjustable wrench).
If you'd like to make a donation to the channel, please follow the link below: paypal.me/Hard...
Parts & Specialty Tools:
TEKTON 1/2 Inch Drive x 36 mm 6-Point Impact Socket | SID22136
amzn.to/3RdDfcY
Sunex 2645, 1/2 Inch Drive Impact Socket Set, 26-Piece, Metric, 10mm-36mm, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage
amzn.to/3G8yHyb
Permatex 80078-12PK Anti-Seize Lubricant, 8 oz. (Pack of 12)
amzn.to/3SRvUks
Edward Tools Gooseneck Wrecking Bar - Extra strength drop forged steel pry bar
amzn.to/46rSCmm
Disc Brake Piston Spreader Tool
amzn.to/3RaiPRW
Manual Impact Driver Set for Broken Screw and Frozen Screw, Stripped Screw Extractor Set, Made in JAPAN
amzn.to/3MVeM9J
As an Amazon associate, I earn from qualifying purchases. Thank you for your support!
Please Subscribe: goo.gl/x6fySQ
#struts